ansible-pacemaker

This is an Ansible module to configure pacemaker with crm command. To use this, write a playbook like below:

- name: test
  hosts: controller
  sudo: yes
  serial: 1
  tasks:
    - name: disable stonith
      pacemaker: >
         resource='property no-quorum-policy="ignore" stonith-enabled="false"'
         state=present

    - name: define floating IP
      pacemaker: 
         resource: >
           primitive test_vip ocf:heartbeat:IPaddr2
           params ip="192.168.33.200" cidr_netmask="24" nic="port-ctl"
         state: present

    - name: change floating IP
      pacemaker: 
         resource: >
           primitive test_vip ocf:heartbeat:IPaddr2
           params ip="192.168.33.100" cidr_netmask="24" nic="port-ctl"
         state: present

    - name: remove floating IP
      pacemaker: 
         resource: >
           primitive test_vip ocf:heartbeat:IPaddr2
           params ip="192.168.33.100" cidr_netmask="24" nic="port-ctl"
         state: absent

"resource" contains the crm resource to configure. 'primitive ... nic="port-ctl"' is just like "crm configure primitive" subcommand. As such after every call of the pacemaker module there is an implicit commit.

state=<present|absent> works just like other ansible modules (default=present). If there is the same configuration, a task with state=present will do nothing and one with state=absent will delete the configuration.

current	state=present	state=absent
the same config	doing nothing	delete one
another config with same id/name	delete it and add new one	delete one
no config	add new one	doing nothing

Currently, it supports crm configure sub commands below:

• primitive (tested)
• monitor
• group
• clone
• ms
• rsc_template
• location
• colocation
• order
• property (tested)
• rsc_defaults
• fencing_topology