Skip to content
forked from codeinred/tuplet

A fast, simple tuple implementation that implements tuple as an aggregate

License

Notifications You must be signed in to change notification settings

gatchamix/tuplet

 
 

Repository files navigation

tuplet: A Lightweight Tuple Library for Modern C++

tuplet is a one-header library that implements a fast and lightweight tuple type, tuplet::tuple, that guarantees performance, fast compile times, and a sensible and efficent data layout. A tuplet::tuple is implemented as an aggregate containing it's elements, and this ensures that it's

  • trivially copyable,
  • trivially moveable,
  • trivially assignable,
  • trivially constructible,
  • and trivially destructible.

This results in better code generation by the compiler, allowing tuplet::tuple to be passed in registers, and to be serialized and deserialized via memcpy.

What's more, the implementation of tuplet::tuple is less than one fifth the size of std::tuple, both in terms of lines, and in terms of kilobytes of code. tuplet.hpp clocks in at 300 odd lines, compared to 1724 lines for gcc 9's implementation of std::tuple.

If you'd like a further discussion of how tuplet::tuple compares to std::tuple and why you should use it, see the Motivation section below!

Usage

Creating a tuple is as simple as 1, 2, "Hello, world"! Writing

tuplet::tuple tup = {1, 2, std::string("Hello, world!")};

Will create a tuple of type tuple<int, int, std::string>, just like you'd expect it to. This is all you need to get started, but the following sections will expand upon the functionality provided by tuplet in greater depth.

Access members with get() or the index operator

You can access members via get:

std::cout << get<2>(tup) << std::endl; // Prints "Hello, world!"

Or via operator[]:

using tuplet::tag;
std::cout << tup[tag<2>()] << std::endl; // Prints "Hello, world!"

Something that's important to note is that tag is just an alias for std::integral_constant:

template <size_t I>
using tag = std::integral_constant<size_t, I>;

Use Index Literals for Clean, Easy Access

You can access elements of a tuple very cleanly by using the _tag literal provided in tuplet::literals! This namespace defines the literal operator _tag, which take number and produce a tuplet::tag templated on that number, so 0_tag evaluates to tuplet::tag<0>(), 1_tag evaluates to tuplet::tag<1>(), and so on!

using namespace tuplet::literals;

tuplet::tuple tup = {1, 2, std::string("Hello, world!")};

std::cout << tup[0_tag] << std::endl; // Prints 1
std::cout << tup[1_tag] << std::endl; // Prints 2
std::cout << tup[2_tag] << std::endl; // Prints Hello World

Decompose tuples via Structured Bindings

The tuple can also be accessed via a structured binding:

// a binds to get<0>(tup),
// b binds to get<1>(tup), and
// c binds to get<2>(tup)
auto& [a, b, c] = tup;

std::cout << c << std::endl; // Print "Hello, world!"

Tie values together with tuplet::tie()

You can create a tuple of references with tuplet::tie! This function acts just like std::tie does:

int a;
int b;
std::string s;

// Creates a tuplet::tuple<int&, int&, std::string&>
tuplet::tuple tup = tuplet::tie(a, b, s);

// a will be set to 1,
// b will be set to 2, and
// s will be set to "Hello, world!"
tup = tuplet::tuple{1, 2, "Hello, world!"};

std::cout << s << std::endl; // Prints Hello World

Assign Values via tuple.assign()

It's possible to easily and efficently assign values to a tuple using the .assign() method:

tuplet::tuple<int, int, std::string> tup;

tup.assign(1, 2, "Hello, world!");

Store references using std::ref()

You can use std::ref to store references inside a tuple!

std::string message;

// t has type tuple<int, int, std::string&>
tuplet::tuple t = {1, 2, std::ref(message)};

message = "Hello, world!";

std::cout << get<2>(t) << std::endl; // Prints Hello, world!

You can also store a reference by specifying it as part of the type of the tuple:

// Stores a reference to message
tuplet::tuple<int, int, std::string&> t = {1, 2, message};

These methods are equivilant, but the one with std::ref can result in cleaner and shorter code, so the template deduction guide accounts for it.

Use elements as function args with tuplet::apply()

As with std::apply, you can use tuplet::apply to use the elements of a tuple as arguments of a function, like so:

// Prints arguments on successive lines
auto print = [](auto&... args) {
    ((std::cout << args << '\n') , ...);
};

apply(print, tuplet::tuple{1, 2, "Hello, world!"});

Installation

Tuplet can now be installed as a CMake package!

git clone https://github.com/codeinred/tuplet.git
cd tuplet
cmake -B build -DCMAKE_INSTALL_PREFIX="/path/to/install"
cmake --build build
cmake --build build --target install

If you're installing tuplet globally, you may have to run the final command with sudo:

# Global install
git clone https://github.com/codeinred/tuplet.git
cd tuplet
cmake -B build
cmake --build build
sudo cmake --build build --target install

This will attempt to build tests. If the default system compiler doesn't support C++20 and buliding fails, you can use an alternative compiler by specifying -DCMAKE_CXX_COMPILER during the configuration step:

cmake -B build -DCMAKE_CXX_COMPILER=g++-11

Alternatively, on newer versions of CMake (e.g, cmake 3.15 and above), you can skip the build step entirely. See this documentation for more information.

git clone https://github.com/codeinred/tuplet.git
cd tuplet
cmake -B build
sudo cmake --install build
# Or:
cmake --install build --prefix "/path/to/install"

Once tuplet is installed, it can now be discovered via find_package, and targeted via target_link_libraries. It's a header-only library, but this will ensure that tuplet's directory is added to the include path.

cmake_minimum_required(VERSION 3.14)

project(my_project LANGUAGES CXX)

find_package(tuplet REQUIRED)

add_executable(main)
target_sources(main PRIVATE main.cpp)
target_link_libraries(main PRIVATE tuplet::tuplet)

Motivation

This section intends to address a single fundamental question: Why would I use this instead of std::tuple?

It is my hope that by addressing this question, I might explain my purpose for writing this library, as well as providing a clearer overview of what it provides.

std::tuple is not a zero-cost abstraction, and using it introduces a runtime penalty in comparison to traditional aggregate datatypes, such as structs. std::tuple also compiles slowly, introducing a penalty on libraries that make extensive use of it.

tuplet::tuple has none of these problems.

  • tuplet::tuple an aggregate type.

    • When the elements are trivially constructible, tuplet::tuple is trivially constructible
    • When elements are trivially destructible, tuplet::tuple is trivially destructible
  • tuplet::tuple can be passed in the registers. This means that there's's no overhead compared to a struct

  • Compilation is much faster, especially for larger or more complex tuples.

    This occurs because tuplet::tuple is an aggregate type, and also because indexing was specifically designed in a way that allowed for faster lookp of elements.

  • tuplet::tuple takes advantage of empty-base-optimization and [[no_unique_address]]. This means that empty types don't contribute to the size of the tuple.

Can std::tuple be rewritten to have these properties?

Not without both an ABI break and a change to it's API. There are a few reasons for this.

  • The memory layout of std::tuple tends to be in reverse order when compared to a corresponding struct containing the same types. Fixing this would be an ABI break.
  • Because std::tuple isn't trivially copyable and isn't an aggregate, it tends to be passed on the stack instead of in the registers. Fixing this would be an ABI break.
  • The constructor of std::tuple provides overloads for passing an allocator to the constructor. Given that std::tuple should allocate on the stack, I don't know why this was put into the standard.

Having an allocator makes sense for a type like std::vector, which was designed for use even in ususual memory-constrained situations, but in my opinion, std::tuple would have been better off with an API that was as simple as possible.

I hope that either a future version of C++ introduces epochs (or a similar feature), which would allow for a re-write of std::tuple; or that some future version introduces a language-level tuple construct, rendering std::tuple obsolete in it's entirety.

Other weird std::tuple facts: When using the MSVC standard library implementation, std::tuple won't even necessarily have the same size as a struct with the same member types. This caused a compile error when I introduced a static_assert that (incorrectly) assumed std::tuple would be sensibly sized. I had to disable the static_assert for MSVC:

// In bench-heterogenous.cpp
using hetero_std_tuple_t = std::tuple<int8_t, int8_t, int16_t, int32_t>;
using hetero_tuplet_tuple_t = tuplet::tuple<int8_t, int8_t, int16_t, int32_t>;

// For some reason this doesn't apply in windows
#ifndef _MSC_VER
static_assert(sizeof(hetero_std_tuple_t) == 8, "Expected std::tuple to be 8 bytes");
#endif
static_assert(sizeof(hetero_tuplet_tuple_t) == 8, "Expected tuplet::tuple to be 8 bytes");

Needless to say, being an aggregate type, tuplet::tuple does not suffer from this problem.

Benchmarks

The compiler is signifigantly better at optimizing memory-intensive operations on tuplet::tuplet when compared to std::tuplet, with a measured speedup of 2x when copying vectors of 256 elements, and a speedup up 2.25x for vectors of 512 elements containing homogenous tuples (tuples where all types are identical, test size 8 bytes per element).

tuplet-bench-vector-copy-i9900k.png

Furthermore, for tuples containing more than one type of element (heterogenous tuples, test size 8 bytes per element), speedups as large as 13.35x were observed with tuplet::tuple when compared to std::tuple!

tuplet-bench-vector-copy-heterogenous-i9900k.png

In these benchmarks, the v<n> suffix measures the time to copy a vector containing n elements, each of which is a tuple. You can view the code in the bench/ folder of the repository. It uses the Google Benchmark library.

Why the speedup? As stated before, tuplet::tuple is an aggregate type. This means that the compiler is better able to judge what type of optimizations it's allowed to do. In the case of the copy benchmarks, the compiler is able to implement the copy operation using an memcpy-like operation for tuplet::tuple. This can't be done for std::tuple, however, because std::tuple isn't an aggregate type, and isn't trivially copyable.

To run the benchmarks on your local machine, simply clone and build the project with a compiler that supports C++20:

git clone https://github.com/codeinred/tuplet.git
cd tuplet
cmake -B build -G Ninja -DCMAKE_BUILD_TYPE=Release
cmake --build build
build/bench

About

A fast, simple tuple implementation that implements tuple as an aggregate

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C++ 83.7%
  • CMake 16.3%