pythongh-89739: pythongh-77140: Support zip64 in zipimport (pythonGH-…

…94146)

* Reads zip64 files as produced by the zipfile module
* Include tests (somewhat slow, however, because of the need to create "large" zips)
* About the same amount of strictness reading invalid zip files as zipfile has
* Still works on files with prepended data (like pex)

There are a lot more test cases at https://github.com/thatch/zipimport64/ that give me confidence that this works for real-world files.

Fixes python#89739 and python#77140.

---------

Co-authored-by: Itamar Ostricher <[email protected]>
Reviewed-by: Gregory P. Smith <[email protected]>

Doc/library/zipimport.rst

@@ -30,6 +30,9 @@ Any files may be present in the ZIP archive, but importers are only invoked for
 corresponding :file:`.pyc` file, meaning that if a ZIP archive
 doesn't contain :file:`.pyc` files, importing may be rather slow.
 
+.. versionchanged:: 3.13
+   ZIP64 is supported
+
 .. versionchanged:: 3.8
    Previously, ZIP archives with an archive comment were not supported.
 

Doc/whatsnew/3.13.rst

@@ -700,6 +700,12 @@ xml.etree.ElementTree
   :func:`~xml.etree.ElementTree.iterparse` for explicit cleaning up.
   (Contributed by Serhiy Storchaka in :gh:`69893`.)
 
+zipimport
+---------
+
+* Gains support for ZIP64 format files.  Everybody loves huge code right?
+  (Contributed by Tim Hatch in :gh:`94146`.)
+
 
 Optimizations
 =============

Lib/importlib/_bootstrap_external.py

@@ -81,6 +81,11 @@ def _pack_uint32(x):
     return (int(x) & 0xFFFFFFFF).to_bytes(4, 'little')
 
 
+def _unpack_uint64(data):
+    """Convert 8 bytes in little-endian to an integer."""
+    assert len(data) == 8
+    return int.from_bytes(data, 'little')
+
 def _unpack_uint32(data):
     """Convert 4 bytes in little-endian to an integer."""
     assert len(data) == 4

Lib/test/test_zipimport.py

@@ -128,6 +128,10 @@ def makeZip(self, files, zipName=TEMP_ZIP, **kw):
                 f.write(stuff)
                 f.write(data)
 
+    def getZip64Files(self):
+        # This is the simplest way to make zipfile generate the zip64 EOCD block
+        return {f"f{n}.py": (NOW, test_src) for n in range(65537)}
+
     def doTest(self, expected_ext, files, *modules, **kw):
         self.makeZip(files, **kw)
 
@@ -798,6 +802,14 @@ def testLargestPossibleComment(self):
         files = {TESTMOD + ".py": (NOW, test_src)}
         self.doTest(".py", files, TESTMOD, comment=b"c" * ((1 << 16) - 1))
 
+    def testZip64(self):
+        files = self.getZip64Files()
+        self.doTest(".py", files, "f6")
+
+    def testZip64CruftAndComment(self):
+        files = self.getZip64Files()
+        self.doTest(".py", files, "f65536", comment=b"c" * ((1 << 16) - 1))
+
 
 @support.requires_zlib()
 class CompressedZipImportTestCase(UncompressedZipImportTestCase):

Lib/zipimport.py

@@ -15,7 +15,7 @@
 #from importlib import _bootstrap_external
 #from importlib import _bootstrap  # for _verbose_message
 import _frozen_importlib_external as _bootstrap_external
-from _frozen_importlib_external import _unpack_uint16, _unpack_uint32
+from _frozen_importlib_external import _unpack_uint16, _unpack_uint32, _unpack_uint64
 import _frozen_importlib as _bootstrap  # for _verbose_message
 import _imp  # for check_hash_based_pycs
 import _io  # for open
@@ -40,8 +40,14 @@ class ZipImportError(ImportError):
 _module_type = type(sys)
 
 END_CENTRAL_DIR_SIZE = 22
-STRING_END_ARCHIVE = b'PK\x05\x06'
+END_CENTRAL_DIR_SIZE_64 = 56
+END_CENTRAL_DIR_LOCATOR_SIZE_64 = 20
+STRING_END_ARCHIVE = b'PK\x05\x06'  # standard EOCD signature
+STRING_END_LOCATOR_64 = b'PK\x06\x07'  # Zip64 EOCD Locator signature
+STRING_END_ZIP_64 = b'PK\x06\x06'  # Zip64 EOCD signature
 MAX_COMMENT_LEN = (1 << 16) - 1
+MAX_UINT32 = 0xffffffff
+ZIP64_EXTRA_TAG = 0x1
 
 class zipimporter(_bootstrap_external._LoaderBasics):
     """zipimporter(archivepath) -> zipimporter object
@@ -356,49 +362,72 @@ def _read_directory(archive):
         # to not cause problems when some runs 'python3 /dev/fd/9 9<some_script'
         start_offset = fp.tell()
         try:
+            # Check if there's a comment.
             try:
-                fp.seek(-END_CENTRAL_DIR_SIZE, 2)
-                header_position = fp.tell()
-                buffer = fp.read(END_CENTRAL_DIR_SIZE)
+                fp.seek(0, 2)
+                file_size = fp.tell()
             except OSError:
-                raise ZipImportError(f"can't read Zip file: {archive!r}", path=archive)
-            if len(buffer) != END_CENTRAL_DIR_SIZE:
-                raise ZipImportError(f"can't read Zip file: {archive!r}", path=archive)
-            if buffer[:4] != STRING_END_ARCHIVE:
-                # Bad: End of Central Dir signature
-                # Check if there's a comment.
-                try:
-                    fp.seek(0, 2)
-                    file_size = fp.tell()
-                except OSError:
-                    raise ZipImportError(f"can't read Zip file: {archive!r}",
-                                         path=archive)
-                max_comment_start = max(file_size - MAX_COMMENT_LEN -
-                                        END_CENTRAL_DIR_SIZE, 0)
-                try:
-                    fp.seek(max_comment_start)
-                    data = fp.read()
-                except OSError:
-                    raise ZipImportError(f"can't read Zip file: {archive!r}",
-                                         path=archive)
-                pos = data.rfind(STRING_END_ARCHIVE)
-                if pos < 0:
-                    raise ZipImportError(f'not a Zip file: {archive!r}',
-                                         path=archive)
+                raise ZipImportError(f"can't read Zip file: {archive!r}",
+                                     path=archive)
+            max_comment_plus_dirs_size = (
+                MAX_COMMENT_LEN + END_CENTRAL_DIR_SIZE +
+                END_CENTRAL_DIR_SIZE_64 + END_CENTRAL_DIR_LOCATOR_SIZE_64)
+            max_comment_start = max(file_size - max_comment_plus_dirs_size, 0)
+            try:
+                fp.seek(max_comment_start)
+                data = fp.read(max_comment_plus_dirs_size)
+            except OSError:
+                raise ZipImportError(f"can't read Zip file: {archive!r}",
+                                     path=archive)
+            pos = data.rfind(STRING_END_ARCHIVE)
+            pos64 = data.rfind(STRING_END_ZIP_64)
+
+            if (pos64 >= 0 and pos64+END_CENTRAL_DIR_SIZE_64+END_CENTRAL_DIR_LOCATOR_SIZE_64==pos):
+                # Zip64 at "correct" offset from standard EOCD
+                buffer = data[pos64:pos64 + END_CENTRAL_DIR_SIZE_64]
+                if len(buffer) != END_CENTRAL_DIR_SIZE_64:
+                    raise ZipImportError(
+                        f"corrupt Zip64 file: Expected {END_CENTRAL_DIR_SIZE_64} byte "
+                        f"zip64 central directory, but read {len(buffer)} bytes.",
+                        path=archive)
+                header_position = file_size - len(data) + pos64
+
+                central_directory_size = _unpack_uint64(buffer[40:48])
+                central_directory_position = _unpack_uint64(buffer[48:56])
+                num_entries = _unpack_uint64(buffer[24:32])
+            elif pos >= 0:
                 buffer = data[pos:pos+END_CENTRAL_DIR_SIZE]
                 if len(buffer) != END_CENTRAL_DIR_SIZE:
                     raise ZipImportError(f"corrupt Zip file: {archive!r}",
                                          path=archive)
+
                 header_position = file_size - len(data) + pos
 
-            header_size = _unpack_uint32(buffer[12:16])
-            header_offset = _unpack_uint32(buffer[16:20])
-            if header_position < header_size:
+                # Buffer now contains a valid EOCD, and header_position gives the
+                # starting position of it.
+                central_directory_size = _unpack_uint32(buffer[12:16])
+                central_directory_position = _unpack_uint32(buffer[16:20])
+                num_entries = _unpack_uint16(buffer[8:10])
+
+                # N.b. if someday you want to prefer the standard (non-zip64) EOCD,
+                # you need to adjust position by 76 for arc to be 0.
+            else:
+                raise ZipImportError(f'not a Zip file: {archive!r}',
+                                     path=archive)
+
+            # Buffer now contains a valid EOCD, and header_position gives the
+            # starting position of it.
+            # XXX: These are cursory checks but are not as exact or strict as they
+            # could be.  Checking the arc-adjusted value is probably good too.
+            if header_position < central_directory_size:
                 raise ZipImportError(f'bad central directory size: {archive!r}', path=archive)
-            if header_position < header_offset:
+            if header_position < central_directory_position:
                 raise ZipImportError(f'bad central directory offset: {archive!r}', path=archive)
-            header_position -= header_size
-            arc_offset = header_position - header_offset
+            header_position -= central_directory_size
+            # On just-a-zipfile these values are the same and arc_offset is zero; if
+            # the file has some bytes prepended, `arc_offset` is the number of such
+            # bytes.  This is used for pex as well as self-extracting .exe.
+            arc_offset = header_position - central_directory_position
             if arc_offset < 0:
                 raise ZipImportError(f'bad central directory size or offset: {archive!r}', path=archive)
 
@@ -415,6 +444,11 @@ def _read_directory(archive):
                     raise EOFError('EOF read where not expected')
                 # Start of file header
                 if buffer[:4] != b'PK\x01\x02':
+                    if count != num_entries:
+                        raise ZipImportError(
+                            f"mismatched num_entries: {count} should be {num_entries} in {archive!r}",
+                            path=archive,
+                        )
                     break                                # Bad: Central Dir File Header
                 if len(buffer) != 46:
                     raise EOFError('EOF read where not expected')
@@ -430,9 +464,6 @@ def _read_directory(archive):
                 comment_size = _unpack_uint16(buffer[32:34])
                 file_offset = _unpack_uint32(buffer[42:46])
                 header_size = name_size + extra_size + comment_size
-                if file_offset > header_offset:
-                    raise ZipImportError(f'bad local header offset: {archive!r}', path=archive)
-                file_offset += arc_offset
 
                 try:
                     name = fp.read(name_size)
@@ -444,7 +475,10 @@ def _read_directory(archive):
                 # slower than reading the data because fseek flushes stdio's
                 # internal buffers.    See issue #8745.
                 try:
-                    if len(fp.read(header_size - name_size)) != header_size - name_size:
+                    extra_data_len = header_size - name_size
+                    extra_data = memoryview(fp.read(extra_data_len))
+
+                    if len(extra_data) != extra_data_len:
                         raise ZipImportError(f"can't read Zip file: {archive!r}", path=archive)
                 except OSError:
                     raise ZipImportError(f"can't read Zip file: {archive!r}", path=archive)
@@ -461,6 +495,60 @@ def _read_directory(archive):
 
                 name = name.replace('/', path_sep)
                 path = _bootstrap_external._path_join(archive, name)
+
+                # Ordering matches unpacking below.
+                if (
+                    file_size == MAX_UINT32 or
+                    data_size == MAX_UINT32 or
+                    file_offset == MAX_UINT32
+                ):
+                    # need to decode extra_data looking for a zip64 extra (which might not
+                    # be present)
+                    while extra_data:
+                        if len(extra_data) < 4:
+                            raise ZipImportError(f"can't read header extra: {archive!r}", path=archive)
+                        tag = _unpack_uint16(extra_data[:2])
+                        size = _unpack_uint16(extra_data[2:4])
+                        if len(extra_data) < 4 + size:
+                            raise ZipImportError(f"can't read header extra: {archive!r}", path=archive)
+                        if tag == ZIP64_EXTRA_TAG:
+                            if (len(extra_data) - 4) % 8 != 0:
+                                raise ZipImportError(f"can't read header extra: {archive!r}", path=archive)
+                            num_extra_values = (len(extra_data) - 4) // 8
+                            if num_extra_values > 3:
+                                raise ZipImportError(f"can't read header extra: {archive!r}", path=archive)
+                            values = struct.unpack_from(f"<{min(num_extra_values, 3)}Q",
+                                                        extra_data, offset=4)
+
+                            # N.b. Here be dragons: the ordering of these is different than
+                            # the header fields, and it's really easy to get it wrong since
+                            # naturally-occuring zips that use all 3 are >4GB
+                            if file_size == MAX_UINT32:
+                                file_size = values.pop(0)
+                            if data_size == MAX_UINT32:
+                                data_size = values.pop(0)
+                            if file_offset == MAX_UINT32:
+                                file_offset = values.pop(0)
+
+                            break
+
+                        # For a typical zip, this bytes-slicing only happens 2-3 times, on
+                        # small data like timestamps and filesizes.
+                        extra_data = extra_data[4+size:]
+                    else:
+                        _bootstrap._verbose_message(
+                            "zipimport: suspected zip64 but no zip64 extra for {!r}",
+                            path,
+                        )
+                # XXX These two statements seem swapped because `central_directory_position`
+                # is a position within the actual file, but `file_offset` (when compared) is
+                # as encoded in the entry, not adjusted for this file.
+                # N.b. this must be after we've potentially read the zip64 extra which can
+                # change `file_offset`.
+                if file_offset > central_directory_position:
+                    raise ZipImportError(f'bad local header offset: {archive!r}', path=archive)
+                file_offset += arc_offset
+
                 t = (path, compress, data_size, file_size, file_offset, time, date, crc)
                 files[name] = t
                 count += 1

Misc/NEWS.d/next/Library/2022-06-22-14-45-32.gh-issue-89739.CqZcRL.rst

@@ -0,0 +1 @@
+The :mod:`zipimport` module can now read ZIP64 files.