---

An intuitive and customizable cross-platform ground control station for remote vehicles of all types.

Development

Installing Cockpit

Cockpit is typically installed as an Electron application or BlueOS Extension, but for development purposes it is valuable to run it locally.

To start, clone the repository and its submodules. The submodules are required components for Cockpit to be able to run:

git clone --recurse-submodules [email protected]:bluerobotics/cockpit.git

Next, install bun. Following their documented instructions is strongly recommended - we have received reports that installing bun from alternatives like Snap did not work properly.

With bun installed, you can enter the repository folder and follow the steps below:

bun install

and then run the server locally with:

bun run dev --host

Then you should see a prompt with the local IP and port that can be accessed through a browser, such as localhost:5173.

Installing backend providers

Cockpit is currently a frontend-only application. That means it relies on data offered by other backend solutions, which are not built-in.

If you have a BlueOS instance running, there's no need to install any backend, as BlueOS already provides everything.

If that's not your case and you want to install the necessary backends, follow the instructions below:

1. Install a MAVLink router. We recommend mavp2p or MAVLink Router.
2. Run the MAVLink router, connecting it to your vehicle or SITL instance.
3. Install mavlink2rest.
4. Run mavlink2rest, pointing it to the endpoint provided by the MAVLink router. Remember to serve the API over the 6040 port by running it with --server 0.0.0.0:6040.
5. [Optional] If you want to work with video streaming, install Mavlink Camera Manager.

Connecting to your vehicle

Follow the instructions provided here to connect Cockpit to your vehicle.

If you're running a BlueOS instance, just put the IP address of it in "Global vehicle address" and click the "apply" button.

If you're serving mavlink2rest in the same machine as Cockpit, activate the checkmark for "Mavlink2Rest connection" and use ws://127.0.0.1:6040/v1/ws/mavlink there (if you're running a mavlink2rest version before 0.11.15, omit the /v1 in the URL).

If you're serving mavlink-camera-manager in the same machine as Cockpit, activate the checkmark for "WebRTC connection" and use ws://127.0.0.1:6020 there.