Update README.md

README.md

@@ -57,8 +57,8 @@ The stream created by `DoViBaker` is a pure PQ12 stream. That means it is a stre
  * --master-display "G(13250,34500)B(7500,3000)R(34000,16000)WP(15635,16450)L(40000000,50)"
  * --max-cll "1442,329"
 
-The above values are just an example and the acual values must be taken from the stream. The values for `L` of the `master-display` flag are the `_dovi_static_master_display_max_luminance` and `_dovi_static_master_display_min_luminance` frame property set by `DoViBaker` respectivly multiplied by a factor of 10000. Not all DolbyVision substreams carries these values however, in which case you will need to read them from the Base Layer stream by [MediaInfo](https://mediaarea.net/MediaInfo) for example. The values above for `G`, `B`, `R` and `WP` are for the most usually used `Display P3` color gamut. 
-The values for the `max-cll` flag are the `_dovi_static_max_content_light_level` and `_dovi_static_max_avg_content_light_level` respectively. Again, not all DolbyVision substreams carries those, in which case you will need to rely on the values from you Base Layer.
+The above values are just an example and the acual values must be taken from the stream. The values for `L` of the `master-display` flag are the `_dovi_static_master_display_max_luminance` and `_dovi_static_master_display_min_luminance` frame property set by `DoViBaker` respectivly multiplied by a factor of 10000. Not all DolbyVision substreams carry these values however, in which case you will need to read them from the Base Layer stream by [MediaInfo](https://mediaarea.net/MediaInfo) for example. The values above for `G`, `B`, `R` and `WP` are for the most usually used `Display P3` color gamut. 
+The values for the `max-cll` flag are the `_dovi_static_max_content_light_level` and `_dovi_static_max_avg_content_light_level` respectively. Again, not all DolbyVision substreams carry those, in which case you will need to rely on the values from you Base Layer.
 
 ## Trims
 It is possible to apply the trims available in the DolbyVision substream. Select which trim to apply using the `trimPq` argument and set `targetMaxNits` and `targetMinNits` as necessary. Be warned however, only the typical CM v2.9 processing is implemented thus far, and most streams don't have very optimized parameters, producing suboptimal results. Thus this feature is experimental only!