chore: remove trailing whitespace, ensure final newlines

to make the editorconfig check pass

LICENSE

@@ -13,4 +13,4 @@ Software: WeTest
       c. Modified copies and works based on the Software must carry prominent notices stating that you changed specified portions of the Software.
 5. Portions of the Software resulted from work developed under a French Government contract and are subject to the following license: the Government is granted for itself and others acting on its behalf a paid-up, nonexclusive, irrevocable worldwide license in this computer software to reproduce, prepare derivative works, and perform publicly and display publicly.
 6. WARRANTY DISCLAIMER. THE SOFTWARE IS SUPPLIED "AS IS" WITHOUT WARRANTY OF ANY KIND. THE COPYRIGHT HOLDERS, THEIR THIRD PARTY LICENSORS, THE FRENCH, THE FRENCH DEPARTMENT OF ENERGY, AND THEIR EMPLOYEES: (1) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT, (2) DO NOT ASSUME ANY LEGAL LIABILITY OR RESPONSIBILITY FOR THE ACCURACY, COMPLETENESS, OR USEFULNESS OF THE SOFTWARE, (3) DO NOT REPRESENT THAT USE OF THE SOFTWARE WOULD NOT INFRINGE PRIVATELY OWNED RIGHTS, (4) DO NOT WARRANT THAT THE SOFTWARE WILL FUNCTION UNINTERRUPTED, THAT IT IS ERROR-FREE OR THAT ANY ERRORS WILL BE CORRECTED.
-7. LIMITATION OF LIABILITY. IN NO EVENT WILL THE COPYRIGHT HOLDERS, THEIR THIRD PARTY LICENSORS, THE UNITED STATES, THE UNITED STATES DEPARTMENT OF ENERGY, OR THEIR EMPLOYEES: BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR NATURE, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR LOSS OF DATA, FOR ANY REASON WHATSOEVER, WHETHER SUCH LIABILITY IS ASSERTED ON THE BASIS OF CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), OR OTHERWISE, EVEN IF ANY OF SAID PARTIES HAS BEEN WARNED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGES.
+7. LIMITATION OF LIABILITY. IN NO EVENT WILL THE COPYRIGHT HOLDERS, THEIR THIRD PARTY LICENSORS, THE UNITED STATES, THE UNITED STATES DEPARTMENT OF ENERGY, OR THEIR EMPLOYEES: BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR NATURE, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR LOSS OF DATA, FOR ANY REASON WHATSOEVER, WHETHER SUCH LIABILITY IS ASSERTED ON THE BASIS OF CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY), OR OTHERWISE, EVEN IF ANY OF SAID PARTIES HAS BEEN WARNED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGES.

wetest/generic/README.md

@@ -26,7 +26,7 @@ See ```specific/weTest_functional_CAENels_PS_FAST_1K5_current.yaml``` to get an
 
 As you can see in the above script, it is sometimes necessary to call several times the ```config``` (or an other part) to fit the power supply behavior. Here you have to first power on the channel and then set the setpoint (current command).
 
-## Specific models 
+## Specific models
 
 Files in ```specific``` folder can be seen as example but you can also use them if it is the power suplly you want to control.
 
@@ -40,4 +40,4 @@ Don't hesitate to:
 - ask for new features (ex: polarity and regulation mode (current or voltage) were the last features added)
 - add more specific models scripts
 
-Contact: Victor Nadot, [email protected]
+Contact: Victor Nadot, [email protected]

wetest/generic/specific/weTest_functional_CAENels_PS_FAST_1K5_current.yaml

@@ -5,22 +5,22 @@ name: "${TEST_TITLE}"
 macros:
     - TEST_TITLE:     "functional test of CAENels fast PS 1K5"
       P:              "Sec-Sub(x):Dis-Dev-Idx:"
-      DELAY:          1 
-      RETRY:          5 
+      DELAY:          1
+      RETRY:          5
       ## not specific to power supply (user inputs)
       # current
       CURRENT:        0.1 # A
       # ramp
-      RAMP_UP:        0.1 # A/s  
+      RAMP_UP:        0.1 # A/s
       DELAY_RAMP_UP:  5   # sec
 
       ## specific to power supply (won't change)
       # ramp
       SET_RAMP_UP:    "IRampSet"
-      GET_RAMP_UP:    "IRampRb"     
+      GET_RAMP_UP:    "IRampRb"
       # regulation mode (current or voltage)
-      SET_REGULATION: "RegModeSet"     
-      GET_REGULATION: "RegModeRb"    
+      SET_REGULATION: "RegModeSet"
+      GET_REGULATION: "RegModeRb"
       # on/off
       SET_ON_OFF:     "EnaCmd"
       GET_ON_OFF:     "EnaRb"
@@ -84,7 +84,7 @@ include:
       SET_ON_OFF:         ${SET_ON_OFF}
       GET_ON_OFF:         ${GET_ON_OFF}
       ON_STATE:           1
-      DELAY_RAMP_UP:      ${DELAY} # no ramp up here, waintoing for user setpoint (next move) 
+      DELAY_RAMP_UP:      ${DELAY} # no ramp up here, waintoing for user setpoint (next move)
 
 
     # config current

wetest/generic/specific/weTest_functional_basicPowerSupply.yaml

@@ -16,8 +16,8 @@ name: "${TEST_TITLE}"
 macros:
     - TEST_TITLE:       "functional test of DeltaESxxx"
       P:                "CEA:"
-      DELAY:            1 
-      RETRY:            2 
+      DELAY:            1
+      RETRY:            2
       ## not specific to power supply (user inputs)
       # config
       VOLTAGE:          2 # Volts
@@ -27,12 +27,12 @@ macros:
       POLARITY:         "Positive field"
       DELAY_RAMP_UP:    1 # sec
       # check desired output (measured value)
-      GET_DESIRED_OUTPUT:     "IMes"  
-      DESIRED_OUTPUT:         ${CURRENT}  
-      DESIRED_OUTPUT_MARGIN:  1 #%  
+      GET_DESIRED_OUTPUT:     "IMes"
+      DESIRED_OUTPUT:         ${CURRENT}
+      DESIRED_OUTPUT_MARGIN:  1 #%
 
 
-      ## specific to power supply (won't change)  
+      ## specific to power supply (won't change)
       ## but user can still change them if needed
       # on/off
       SET_ON_OFF:       "PwrEnaCmd"
@@ -42,25 +42,25 @@ macros:
       DELAY_RAMP_DOWN:  1 # sec
       # voltage
       SET_VOLTAGE:      "USet"
-      GET_VOLTAGE:      "URb"   
+      GET_VOLTAGE:      "URb"
       # current
       SET_CURRENT:      "ISet"
       GET_CURRENT:      "IRb"
       # UVL
       SET_POLARITY:     "BPosSet"
-      GET_POLARITY:     "BPosRb" 
-      # check CC/CV mode    
+      GET_POLARITY:     "BPosRb"
+      # check CC/CV mode
       GET_OPERATION_MODE: "CcStat"
       OPERATION_MODE:     "CC"
-     
+
 
 
 include:
     # init
     - path: 'wetest/generic/weTest_functional_generic_power_supply_init.yaml'
       TEST_TITLE:         "init power supply ${P}"
       P:                  ${P}
-      DELAY:              ${DELAY} 
+      DELAY:              ${DELAY}
       RETRY:              ${RETRY}
       # init
       IGNORE_CLEAR:     True
@@ -80,24 +80,24 @@ include:
       RETRY:                "${RETRY}"
 
       # set target voltage
-      IGNORE_VOLTAGE:     False   
+      IGNORE_VOLTAGE:     False
       SET_VOLTAGE:        "${SET_VOLTAGE}"
-      GET_VOLTAGE:        "${GET_VOLTAGE}"  
+      GET_VOLTAGE:        "${GET_VOLTAGE}"
       VOLTAGE:            "${VOLTAGE}"
       MARGIN_VOLTAGE:     0 # %
 
       # set current
       IGNORE_CURRENT:     False
       SET_CURRENT:        "${SET_CURRENT}"
-      GET_CURRENT:        "${GET_CURRENT}" 
+      GET_CURRENT:        "${GET_CURRENT}"
       CURRENT:            ${CURRENT}
       MARGIN_CURRENT:     0 # %
 
       # set polarity
       IGNORE_POLARITY:    $(IGNORE_POLARITY)
       SET_POLARITY:       ${SET_POLARITY}
       GET_POLARITY:       ${GET_POLARITY}
-      POLARITY:           ${POLARITY}         
+      POLARITY:           ${POLARITY}
 
 
     # check desired output
@@ -106,20 +106,20 @@ include:
       P:                  "${P}"
       DELAY:              "${DELAY}"
       RETRY:              "${RETRY}"
-      # on/off   
+      # on/off
       IGNORE_ON_OFF:          False
       SET_ON_OFF:             ${SET_ON_OFF}
       GET_ON_OFF:             ${GET_ON_OFF}
       ON_STATE:               ${ON_STATE}
-      DELAY_RAMP_UP:          ${DELAY_RAMP_UP} 
-      # check CC/CV mode    
+      DELAY_RAMP_UP:          ${DELAY_RAMP_UP}
+      # check CC/CV mode
       IGNORE_CH_STATUS:       ${IGNORE_CH_STATUS}
       GET_CH_STATUS:          ${GET_OPERATION_MODE}
       CH_STATUS:              ${OPERATION_MODE}
       # check desired output (measured value)
-      IGNORE_MEASURED_VALUE:  False  
-      GET_MEASURED_VALUE:     ${GET_DESIRED_OUTPUT} 
+      IGNORE_MEASURED_VALUE:  False
+      GET_MEASURED_VALUE:     ${GET_DESIRED_OUTPUT}
       MARGIN_MEASURED_VALUE:  ${DESIRED_OUTPUT_MARGIN}
       MEASURED_VALUE:         ${DESIRED_OUTPUT}
 
-      
+

wetest/generic/weTest_functional_generic_power_supply_config.yaml

@@ -15,7 +15,7 @@ macros:
       DELAY:              0.2   # sec: defaut delay (timeout between setter and checking getter)
       RETRY:              2
       # remote mode
-      IGNORE_REMOTE:      True 
+      IGNORE_REMOTE:      True
       SET_REMOTE:         "LocRemSet"
       REMOTE:             1
       # set interclock
@@ -33,7 +33,7 @@ macros:
       SET_RAMP_DOWN :     "RDwnSet"
       GET_RAMP_DOWN :     "RDwnRb"
       RAMP_DOWN:          50  # volt/sec or ms
-      # polarity    
+      # polarity
       IGNORE_POLARITY:    True
       SET_POLARITY:       "BPosSet"
       GET_POLARITY:       "BPosRb"
@@ -43,33 +43,33 @@ macros:
       SET_REGULATION:     "RegModeSet"
       GET_REGULATION:     "RegModeRb"
       REGULATION_STATE:   0   # 0:CV, 1:CC
-      # voltage   
+      # voltage
       IGNORE_VOLTAGE:     True    # by default, voltage tests are skipped
       SET_VOLTAGE:        "USet"
       GET_VOLTAGE:        "UMes"   # should it be RBV or measure value her? TBD
       VOLTAGE:            8   # volts
       MARGIN_VOLTAGE:     0   # %
       # voltage min
       IGNORE_VOLTAGE_MIN: True
-      SET_VOLTAGE_MIN:    "UNVThrSet"    
+      SET_VOLTAGE_MIN:    "UNVThrSet"
       GET_VOLTAGE_MIN:    "UNVThrRb"
       MARGIN_VOLTAGE_MIN: 0 # %
       VOLTAGE_MIN:        5 # volts
       # voltage max
       IGNORE_VOLTAGE_MAX: True
-      SET_VOLTAGE_MAX:    "OVVThrSet"    
+      SET_VOLTAGE_MAX:    "OVVThrSet"
       GET_VOLTAGE_MAX:    "OVVThrRb"
       MARGIN_VOLTAGE_MAX: 0   # %
       VOLTAGE_MAX:        15  # volts
       # current min
       IGNORE_CURRENT_MIN: True
-      SET_CURRENT_MIN:    "UNCThrSet"    
+      SET_CURRENT_MIN:    "UNCThrSet"
       GET_CURRENT_MIN:    "UNCThrRb"
       MARGIN_CURRENT_MIN: 0 # %
       CURRENT_MIN:        5 # A
       # current max
       IGNORE_CURRENT_MAX: True
-      SET_CURRENT_MAX:    "OVCThrSet"    
+      SET_CURRENT_MAX:    "OVCThrSet"
       GET_CURRENT_MAX:    "OVCThrRb"
       MARGIN_CURRENT_MAX: 0   # %
       CURRENT_MAX:        15  # A

wetest/gui/base.py

@@ -209,12 +209,8 @@ class Tooltip:
 
     see:
 
-    http://stackoverflow.com/questions/3221956/
-           what-is-the-simplest-way-to-make-tooltips-
-           in-tkinter/36221216#36221216
-
-    http://www.daniweb.com/programming/software-development/
-           code/484591/a-tooltip-class-for-tkinter
+    http://stackoverflow.com/questions/3221956/what-is-the-simplest-way-to-make-tooltips-in-tkinter/36221216#36221216
+    http://www.daniweb.com/programming/software-development/code/484591/a-tooltip-class-for-tkinter
 
     - Originally written by vegaseat on 2014.09.09.
 

wetest/resources/scenario_schema.yaml

@@ -183,4 +183,4 @@ mapping:
                       type: int
                       desc: |
                         number of retry before marking test as failed,
-                        defaults to config's `retry`, -1 for infinite number of retry
+                        defaults to config's `retry`, -1 for infinite number of retry

wetest/tests/macro-testing.yaml

@@ -198,4 +198,4 @@ tests:
 
     - ${test_1}
 
-    - ${test_2}
+    - ${test_2}

wetest/tests/scenario_range.yaml

@@ -171,4 +171,4 @@ tests:
         step: 5
         lin: 5
         geom: 5
-        sort: reverse
+        sort: reverse

wetest/tests/type-testing.yaml

@@ -152,7 +152,7 @@ tests:
           value: []
 
     - name: 'single-value waveform issue'
-      message: pyepics get returns a float rather than a waveform, is that true for regular EPICS records as well ? 
+      message: pyepics get returns a float rather than a waveform, is that true for regular EPICS records as well ?
       commands:
         - name: "single-value waveform"
           setter: :UIncPwrMes-BPTR