Update to v5.10.221 #93
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit d4202e6 ] Patch series "Fixes for compaction_test", v2. The compaction_test memory selftest introduces fragmentation in memory and then tries to allocate as many hugepages as possible. This series addresses some problems. On Aarch64, if nr_hugepages == 0, then the test trivially succeeds since compaction_index becomes 0, which is less than 3, due to no division by zero exception being raised. We fix that by checking for division by zero. Secondly, correctly set the number of hugepages to zero before trying to set a large number of them. Now, consider a situation in which, at the start of the test, a non-zero number of hugepages have been already set (while running the entire selftests/mm suite, or manually by the admin). The test operates on 80% of memory to avoid OOM-killer invocation, and because some memory is already blocked by hugepages, it would increase the chance of OOM-killing. Also, since mem_free used in check_compaction() is the value before we set nr_hugepages to zero, the chance that the compaction_index will be small is very high if the preset nr_hugepages was high, leading to a bogus test success. This patch (of 3): Currently, if at runtime we are not able to allocate a huge page, the test will trivially pass on Aarch64 due to no exception being raised on division by zero while computing compaction_index. Fix that by checking for nr_hugepages == 0. Anyways, in general, avoid a division by zero by exiting the program beforehand. While at it, fix a typo, and handle the case where the number of hugepages may overflow an integer. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: bd67d5c ("Test compaction of mlocked memory") Signed-off-by: Dev Jain <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Sri Jayaramappa <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit fb33eb2 ] Qgroup extent records are created when delayed ref heads are created and then released after accounting extents at btrfs_qgroup_account_extents(), called during the transaction commit path. If a transaction is aborted we free the qgroup records by calling btrfs_qgroup_destroy_extent_records() at btrfs_destroy_delayed_refs(), unless we don't have delayed references. We are incorrectly assuming that no delayed references means we don't have qgroup extents records. We can currently have no delayed references because we ran them all during a transaction commit and the transaction was aborted after that due to some error in the commit path. So fix this by ensuring we btrfs_qgroup_destroy_extent_records() at btrfs_destroy_delayed_refs() even if we don't have any delayed references. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 81f7eb0 ("btrfs: destroy qgroup extent records on transaction abort") CC: [email protected] # 6.1+ Reviewed-by: Josef Bacik <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 79ea655 ] If read_mapping_page() encounters an error, it returns an errno, not a page with PageError set, so this test is not needed. Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Stable-dep-of: 7373a51 ("nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors") Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 09a46ac ] In prepartion for switching from kmap() to kmap_local(), return the kmap address from nilfs_get_page() instead of having the caller look up page_address(). [konishi.ryusuke: fixed a missing blank line after declaration] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: Ryusuke Konishi <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Stable-dep-of: 7373a51 ("nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors") Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 7373a51 ] The error handling in nilfs_empty_dir() when a directory folio/page read fails is incorrect, as in the old ext2 implementation, and if the folio/page cannot be read or nilfs_check_folio() fails, it will falsely determine the directory as empty and corrupt the file system. In addition, since nilfs_empty_dir() does not immediately return on a failed folio/page read, but continues to loop, this can cause a long loop with I/O if i_size of the directory's inode is also corrupted, causing the log writer thread to wait and hang, as reported by syzbot. Fix these issues by making nilfs_empty_dir() immediately return a false value (0) if it fails to get a directory folio/page. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ryusuke Konishi <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=c8166c541d3971bf6c87 Fixes: 2ba466d ("nilfs2: directory entry operations") Tested-by: Ryusuke Konishi <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 22f0081 upstream. The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 283cb23 upstream. The mei_me_pci_resume doesn't release irq on the error path, in case mei_start() fails. Cc: <[email protected]> Fixes: 33ec082 ("mei: revamp mei reset state machine") Signed-off-by: Tomas Winkler <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7c55b78 upstream. When an xattr size is not what is expected, it is printed out to the kernel log in hex format as a form of debugging. But when that xattr size is bigger than the expected size, printing it out can cause an access off the end of the buffer. Fix this all up by properly restricting the size of the debug hex dump in the kernel log. Reported-by: [email protected] Cc: Dave Kleikamp <[email protected]> Link: https://lore.kernel.org/r/2024051433-slider-cloning-98f9@gregkh Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f026058 upstream. The transferred length is set incorrectly for cancelled bulk transfer TDs in case the bulk transfer ring stops on the last transfer block with a 'Stop - Length Invalid' completion code. length essentially ends up being set to the requested length: urb->actual_length = urb->transfer_buffer_length Length for 'Stop - Length Invalid' cases should be the sum of all TRB transfer block lengths up to the one the ring stopped on, _excluding_ the one stopped on. Fix this by always summing up TRB lengths for 'Stop - Length Invalid' bulk cases. This issue was discovered by Alan Stern while debugging https://bugzilla.kernel.org/show_bug.cgi?id=218890, but does not solve that bug. Issue is older than 4.10 kernel but fix won't apply to those due to major reworks in that area. Tested-by: Pierre Tomon <[email protected]> Cc: [email protected] # v4.10+ Cc: Alan Stern <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 17bd545 upstream. As described in commit c877b3b ("xhci: Add reset on resume quirk for asrock p67 host"), EJ188 have the same issue as EJ168, where completely dies on resume. So apply XHCI_RESET_ON_RESUME quirk to EJ188 as well. Cc: [email protected] Signed-off-by: Kuangyi Chiang <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 91f7a15 upstream. As described in commit 8f873c1 ("xhci: Blacklist using streams on the Etron EJ168 controller"), EJ188 have the same issue as EJ168, where Streams do not work reliable on EJ188. So apply XHCI_BROKEN_STREAMS quirk to EJ188 as well. Cc: [email protected] Signed-off-by: Kuangyi Chiang <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 4254dfe upstream. There is a potential out-of-bounds access when using test_bit() on a single word. The test_bit() and set_bit() functions operate on long values, and when testing or setting a single word, they can exceed the word boundary. KASAN detects this issue and produces a dump: BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965 For full log, please look at [1]. Make the allocation at least the size of sizeof(unsigned long) so that set_bit() and test_bit() have sufficient room for read/write operations without overwriting unallocated memory. [1] Link: https://lore.kernel.org/all/[email protected]/ Fixes: c696f7b ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path") Cc: [email protected] Suggested-by: Keith Busch <[email protected]> Signed-off-by: Breno Leitao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Keith Busch <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 2d43cc7 upstream. Building ppc64le_defconfig with GCC 14 fails with assembler errors: CC fs/readdir.o /tmp/ccdQn0mD.s: Assembler messages: /tmp/ccdQn0mD.s:212: Error: operand out of domain (18 is not a multiple of 4) /tmp/ccdQn0mD.s:226: Error: operand out of domain (18 is not a multiple of 4) ... [6 lines] /tmp/ccdQn0mD.s:1699: Error: operand out of domain (18 is not a multiple of 4) A snippet of the asm shows: # ../fs/readdir.c:210: unsafe_copy_dirent_name(dirent->d_name, name, namlen, efault_end); ld 9,0(29) # MEM[(u64 *)name_38(D) + _88 * 1], MEM[(u64 *)name_38(D) + _88 * 1] # 210 "../fs/readdir.c" 1 1: std 9,18(8) # put_user # *__pus_addr_52, MEM[(u64 *)name_38(D) + _88 * 1] The 'std' instruction requires a 4-byte aligned displacement because it is a DS-form instruction, and as the assembler says, 18 is not a multiple of 4. A similar error is seen with GCC 13 and CONFIG_UBSAN_SIGNED_WRAP=y. The fix is to change the constraint on the memory operand to put_user(), from "m" which is a general memory reference to "YZ". The "Z" constraint is documented in the GCC manual PowerPC machine constraints, and specifies a "memory operand accessed with indexed or indirect addressing". "Y" is not documented in the manual but specifies a "memory operand for a DS-form instruction". Using both allows the compiler to generate a DS-form "std" or X-form "stdx" as appropriate. The change has to be conditional on CONFIG_PPC_KERNEL_PREFIXED because the "Y" constraint does not guarantee 4-byte alignment when prefixed instructions are enabled. Unfortunately clang doesn't support the "Y" constraint so that has to be behind an ifdef. Although the build error is only seen with GCC 13/14, that appears to just be luck. The constraint has been incorrect since it was first added. Fixes: c20beff ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()") Cc: [email protected] # v5.10+ Suggested-by: Kewen Lin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 0774d19 upstream. If an input device declares too many capability bits then modalias string for such device may become too long and not fit into uevent buffer, resulting in failure of sending said uevent. This, in turn, may prevent userspace from recognizing existence of such devices. This is typically not a concern for real hardware devices as they have limited number of keys, but happen with synthetic devices such as ones created by xen-kbdfront driver, which creates devices as being capable of delivering all possible keys, since it doesn't know what keys the backend may produce. To deal with such devices input core will attempt to trim key data, in the hope that the rest of modalias string will fit in the given buffer. When trimming key data it will indicate that it is not complete by placing "+," sign, resulting in conversions like this: old: k71,72,73,74,78,7A,7B,7C,7D,8E,9E,A4,AD,E0,E1,E4,F8,174, new: k71,72,73,74,78,7A,7B,7C,+, This should allow existing udev rules continue to work with existing devices, and will also allow writing more complex rules that would recognize trimmed modalias and check input device characteristics by other means (for example by parsing KEY= data in uevent or parsing input device sysfs attributes). Note that the driver core may try adding more uevent environment variables once input core is done adding its own, so when forming modalias we can not use the entire available buffer, so we reduce it by somewhat an arbitrary amount (96 bytes). Reported-by: Jason Andryuk <[email protected]> Reviewed-by: Peter Hutterer <[email protected]> Tested-by: Jason Andryuk <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Jason Andryuk <[email protected]>
[ Upstream commit 33c94d7 ] don't return 0 if snd_buf->len really greater than snd_buf->buflen Signed-off-by: Chen Hanxiao <[email protected]> Fixes: 0c77668 ("SUNRPC: Introduce trace points in rpc_auth_gss.ko") Reviewed-by: Benjamin Coddington <[email protected]> Reviewed-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8c219e5 ] Fix description for GPIO_TQMX86 from QTMX86 to TQMx86. Fixes: b868db9 ("gpio: tqmx86: Add GPIO from for this IO controller") Signed-off-by: Gregor Herburger <[email protected]> Signed-off-by: Matthias Schiffer <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/e0e38c9944ad6d281d9a662a45d289b88edc808e.1717063994.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 4aa2dcf ] Syzkaller hit a warning [1] in a call to implement() when trying to write a value into a field of smaller size in an output report. Since implement() already has a warn message printed out with the help of hid_warn() and value in question gets trimmed with: ... value &= m; ... WARN_ON may be considered superfluous. Remove it to suppress future syzkaller triggers. [1] WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 implement drivers/hid/hid-core.c:1451 [inline] WARNING: CPU: 0 PID: 5084 at drivers/hid/hid-core.c:1451 hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863 Modules linked in: CPU: 0 PID: 5084 Comm: syz-executor424 Not tainted 6.9.0-rc7-syzkaller-00183-gcf87f46fd34d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 RIP: 0010:implement drivers/hid/hid-core.c:1451 [inline] RIP: 0010:hid_output_report+0x548/0x760 drivers/hid/hid-core.c:1863 ... Call Trace: <TASK> __usbhid_submit_report drivers/hid/usbhid/hid-core.c:591 [inline] usbhid_submit_report+0x43d/0x9e0 drivers/hid/usbhid/hid-core.c:636 hiddev_ioctl+0x138b/0x1f00 drivers/hid/usbhid/hiddev.c:726 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Fixes: 95d1c89 ("HID: simplify implement() a bit") Reported-by: <[email protected]> Suggested-by: Alan Stern <[email protected]> Signed-off-by: Nikita Zhandarovich <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 08af509 upstream. irq_set_type() should not implicitly unmask the IRQ. All accesses to the interrupt configuration register are moved to a new helper tqmx86_gpio_irq_config(). We also introduce the new rule that accessing irq_type must happen while locked, which will become significant for fixing EDGE_BOTH handling. Fixes: b868db9 ("gpio: tqmx86: Add GPIO from for this IO controller") Signed-off-by: Matthias Schiffer <[email protected]> Link: https://lore.kernel.org/r/6aa4f207f77cb58ef64ffb947e91949b0f753ccd.1717063994.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit 404ec4e ] Newer AMD systems can support multiple PCI segments, where each segment contains one or more IOMMU instances. However, an IOMMU instance can only support a single PCI segment. Current code assumes that system contains only one pci segment (segment 0) and creates global data structures such as device table, rlookup table, etc. Introducing per PCI segment data structure, which contains segment specific data structures. This will eventually replace the global data structures. Also update `amd_iommu->pci_seg` variable to point to PCI segment structure instead of PCI segment ID. Co-developed-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Suravee Suthikulpanit <[email protected]> Signed-off-by: Vasant Hegde <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> Stable-dep-of: a295ec5 ("iommu/amd: Fix sysfs leak in iommu init") Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit a295ec5 ] During the iommu initialization, iommu_init_pci() adds sysfs nodes. However, these nodes aren't remove in free_iommu_resources() subsequently. Fixes: 39ab955 ("iommu: Add sysfs bindings for struct iommu_device") Signed-off-by: Kun(llfl) <[email protected]> Reviewed-by: Suravee Suthikulpanit <[email protected]> Link: https://lore.kernel.org/r/c8e0d11c6ab1ee48299c288009cf9c5dae07b42d.1715215003.git.llfl@linux.alibaba.com Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 89e8a23 ] iommu_sva_bind_device() should return either a sva bond handle or an ERR_PTR value in error cases. Existing drivers (idxd and uacce) only check the return value with IS_ERR(). This could potentially lead to a kernel NULL pointer dereference issue if the function returns NULL instead of an error pointer. In reality, this doesn't cause any problems because iommu_sva_bind_device() only returns NULL when the kernel is not configured with CONFIG_IOMMU_SVA. In this case, iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) will return an error, and the device drivers won't call iommu_sva_bind_device() at all. Fixes: 26b25a2 ("iommu: Bind process address spaces to devices") Signed-off-by: Lu Baolu <[email protected]> Reviewed-by: Jean-Philippe Brucker <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Reviewed-by: Vasant Hegde <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ce3af2e ] Fix a memory leak on logi_dj_recv_send_report() error path. Fixes: 6f20d32 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()") Signed-off-by: José Expósito <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit fb5e19d ] This limit became a hard cap starting with the change referenced below. Surface creation on the device will fail if the requested size is larger than this limit so altering the value arbitrarily will expose modes that are too large for the device's hard limits. Fixes: 7ebb47c ("drm/vmwgfx: Read new register for GB memory when available") Signed-off-by: Ian Forbes <[email protected]> Signed-off-by: Zack Rusin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit e96b293 ] If the module is in SFP_MOD_ERROR, `sfp_sm_mod_remove()` will not be run. As a consequence, `sfp_hwmon_remove()` is not getting run either, leaving a stale `hwmon` device behind. `sfp_sm_mod_remove()` itself checks `sfp->sm_mod_state` anyways, so this check was not really needed in the first place. Fixes: d2e816c ("net: sfp: handle module remove outside state machine") Signed-off-by: "Csókás, Bence" <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 968fde8 ] Currently hns3 ring buffer init process would hold cpu too long with big Tx/Rx ring depth. This could cause soft lockup. So this patch adds cond_resched() to the process. Then cpu can break to run other tasks instead of busy looping. Fixes: a723fb8 ("net: hns3: refine for set ring parameters") Signed-off-by: Jie Wang <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit c44711b ] In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value, but then it is unconditionally passed to skb_add_rx_frag() which looks strange and could lead to null pointer dereference. lio_vf_rep_copy_packet() call trace looks like: octeon_droq_process_packets octeon_droq_fast_process_packets octeon_droq_dispatch_pkt octeon_create_recv_info ...search in the dispatch_list... ->disp_fn(rdisp->rinfo, ...) lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...) In this path there is no code which sets pg_info->page to NULL. So this check looks unneeded and doesn't solve potential problem. But I guess the author had reason to add a check and I have no such card and can't do real test. In addition, the code in the function liquidio_push_packet() in liquidio/lio_core.c does exactly the same. Based on this, I consider the most acceptable compromise solution to adjust this issue by moving skb_add_rx_frag() into conditional scope. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 1f233f3 ("liquidio: switchdev support for LiquidIO NIC") Signed-off-by: Aleksandr Mishin <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit b880018 ] komeda_pipeline_get_state() may return an error-valued pointer, thus check the pointer for negative or null value before dereferencing. Fixes: 502932a ("drm/komeda: Add the initial scaler support for CORE") Signed-off-by: Amjad Ouled-Ameur <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit ce62600 ] Device managed panel bridge wrappers are created by calling to drm_panel_bridge_add_typed() and registering a release handler for clean-up when the device gets unbound. Since the memory for this bridge is also managed and linked to the panel device, the release function should not try to free that memory. Moreover, the call to devm_kfree() inside drm_panel_bridge_remove() will fail in this case and emit a warning because the panel bridge resource is no longer on the device resources list (it has been removed from there before the call to release handlers). Fixes: 6702222 ("drm/bridge: Add a devm_ allocator for panel bridge.") Signed-off-by: Adam Miotk <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit d37fe42 ] tcp_v6_syn_recv_sock() calls ip6_dst_store() before inet_sk(newsk)->pinet6 has been set up. This means ip6_dst_store() writes over the parent (listener) np->dst_cookie. This is racy because multiple threads could share the same parent and their final np->dst_cookie could be wrong. Move ip6_dst_store() call after inet_sk(newsk)->pinet6 has been changed and after the copy of parent ipv6_pinfo. Fixes: e994b2f ("tcp: do not lock listener to process SYN packets") Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
… packets [ Upstream commit 791b408 ] Move the vxlan_features_check() call to after we verified the packet is a tunneled VXLAN packet. Without this, tunneled UDP non-VXLAN packets (for ex. GENENVE) might wrongly not get offloaded. In some cases, it worked by chance as GENEVE header is the same size as VXLAN, but it is obviously incorrect. Fixes: e3cfc7e ("net/mlx5e: TX, Add geneve tunnel stateless offload support") Signed-off-by: Gal Pressman <[email protected]> Reviewed-by: Dragos Tatulea <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit 4b8e88e upstream. The old ftruncate() syscall, using the 32-bit off_t misses a sign extension when called in compat mode on 64-bit architectures. As a result, passing a negative length accidentally succeeds in truncating to file size between 2GiB and 4GiB. Changing the type of the compat syscall to the signed compat_off_t changes the behavior so it instead returns -EINVAL. The native entry point, the truncate() syscall and the corresponding loff_t based variants are all correct already and do not suffer from this mistake. Fixes: 3f6d078 ("fix compat truncate/ftruncate") Reviewed-by: Christian Brauner <[email protected]> Cc: [email protected] Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit d388256 upstream. Using sys_io_pgetevents() as the entry point for compat mode tasks works almost correctly, but misses the sign extension for the min_nr and nr arguments. This was addressed on parisc by switching to compat_sys_io_pgetevents_time64() in commit 6431e92 ("parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode"), as well as by using more sophisticated system call wrappers on x86 and s390. However, arm64, mips, powerpc, sparc and riscv still have the same bug. Change all of them over to use compat_sys_io_pgetevents_time64() like parisc already does. This was clearly the intention when the function was originally added, but it got hooked up incorrectly in the tables. Cc: [email protected] Fixes: 48166e6 ("y2038: add 64-bit time_t syscalls to all 32-bit architectures") Acked-by: Heiko Carstens <[email protected]> # s390 Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c374839 upstream. Macronix NAND Flash devices are available in different configurations and densities. MX"35" means SPI NAND MX35"LF"/"UF" , LF means 3V and UF meands 1.8V MX35LF"2G" , 2G means 2Gbits MX35LF2G"E4"/"24"/"14", E4 means internal ECC and Quad I/O(x4) 24 means 8-bit ecc requirement and Quad I/O(x4) 14 means 4-bit ecc requirement and Quad I/O(x4) MX35LF2G14AC is 3V 2Gbit serial NAND flash device (without on-die ECC) https://www.mxic.com.tw/Lists/Datasheet/Attachments/7926/MX35LF2G14AC,%203V,%202Gb,%20v1.1.pdf MX35UF4G24AD is 1.8V 4Gbit serial NAND flash device (without on-die ECC) https://www.mxic.com.tw/Lists/Datasheet/Attachments/7980/MX35UF4G24AD,%201.8V,%204Gb,%20v0.00.pdf MX35UF4GE4AD/MX35UF2GE4AD are 1.8V 4G/2Gbit serial NAND flash device with 8-bit on-die ECC https://www.mxic.com.tw/Lists/Datasheet/Attachments/7983/MX35UF4GE4AD,%201.8V,%204Gb,%20v0.00.pdf MX35UF2GE4AC/MX35UF1GE4AC are 1.8V 2G/1Gbit serial NAND flash device with 8-bit on-die ECC https://www.mxic.com.tw/Lists/Datasheet/Attachments/7974/MX35UF2GE4AC,%201.8V,%202Gb,%20v1.0.pdf MX35UF2G14AC/MX35UF1G14AC are 1.8V 2G/1Gbit serial NAND flash device (without on-die ECC) https://www.mxic.com.tw/Lists/Datasheet/Attachments/7931/MX35UF2G14AC,%201.8V,%202Gb,%20v1.1.pdf Validated via normal(default) and QUAD mode by read, erase, read back, on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host(drivers/spi/spi-mxic.c). Signed-off-by: Jaime Liao <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c45fcf4 upstream. If period_ns is small, prd might well become 0. Catch that case because otherwise with regmap_write(priv->regmap, TIM_ARR, prd - 1); a few lines down quite a big period is configured. Fixes: 7edf736 ("pwm: Add driver for STM32 plaftorm") Cc: [email protected] Reviewed-by: Trevor Gamblin <[email protected]> Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/b86f62f099983646f97eeb6bfc0117bb2d0c340d.1718979150.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 0b768a9 upstream. The pagecache handles readpage failing by itself; it doesn't want filesystems to remove pages from under it. Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 086d490 upstream. IPv6 has this hack changing sk->sk_prot when an IPv6 socket is 'converted' to an IPv4 one with IPV6_ADDRFORM option. This operation is only performed for TCP and UDP, knowing their 'struct proto' for the two network families are populated in the same way, and can not disappear while a reader might use and dereference sk->sk_prot. If we think about it all reads of sk->sk_prot while either socket lock or RTNL is not acquired should be using READ_ONCE(). Also note that other layers like MPTCP, XFRM, CHELSIO_TLS also write over sk->sk_prot. BUG: KCSAN: data-race in inet6_recvmsg / ipv6_setsockopt write to 0xffff8881386f7aa8 of 8 bytes by task 26932 on cpu 0: do_ipv6_setsockopt net/ipv6/ipv6_sockglue.c:492 [inline] ipv6_setsockopt+0x3758/0x3910 net/ipv6/ipv6_sockglue.c:1019 udpv6_setsockopt+0x85/0x90 net/ipv6/udp.c:1649 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3489 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff8881386f7aa8 of 8 bytes by task 26911 on cpu 1: inet6_recvmsg+0x7a/0x210 net/ipv6/af_inet6.c:659 ____sys_recvmsg+0x16c/0x320 ___sys_recvmsg net/socket.c:2674 [inline] do_recvmmsg+0x3f5/0xae0 net/socket.c:2768 __sys_recvmmsg net/socket.c:2847 [inline] __do_sys_recvmmsg net/socket.c:2870 [inline] __se_sys_recvmmsg net/socket.c:2863 [inline] __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2863 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffffffff85e0e980 -> 0xffffffff85e01580 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 26911 Comm: syz-executor.3 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e5153e0e-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Kazunori Kobayashi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 364f997 upstream. Commit 086d490 ("ipv6: annotate some data-races around sk->sk_prot") fixed some data-races around sk->sk_prot but it was not enough. Some functions in inet6_(stream|dgram)_ops still access sk->sk_prot without lock_sock() or rtnl_lock(), so they need READ_ONCE() to avoid load tearing. Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Kazunori Kobayashi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f49cd2f upstream. setsockopt(IPV6_ADDRFORM) and tcp_v6_connect() change icsk->icsk_af_ops under lock_sock(), but tcp_(get|set)sockopt() read it locklessly. To avoid load/store tearing, we need to add READ_ONCE() and WRITE_ONCE() for the reads and writes. Thanks to Eric Dumazet for providing the syzbot report: BUG: KCSAN: data-race in tcp_setsockopt / tcp_v6_connect write to 0xffff88813c624518 of 8 bytes by task 23936 on cpu 0: tcp_v6_connect+0x5b3/0xce0 net/ipv6/tcp_ipv6.c:240 __inet_stream_connect+0x159/0x6d0 net/ipv4/af_inet.c:660 inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:724 __sys_connect_file net/socket.c:1976 [inline] __sys_connect+0x197/0x1b0 net/socket.c:1993 __do_sys_connect net/socket.c:2003 [inline] __se_sys_connect net/socket.c:2000 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:2000 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88813c624518 of 8 bytes by task 23937 on cpu 1: tcp_setsockopt+0x147/0x1c80 net/ipv4/tcp.c:3789 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3585 __sys_setsockopt+0x212/0x2b0 net/socket.c:2252 __do_sys_setsockopt net/socket.c:2263 [inline] __se_sys_setsockopt net/socket.c:2260 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0xffffffff8539af68 -> 0xffffffff8539aff8 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 23937 Comm: syz-executor.5 Not tainted 6.0.0-rc4-syzkaller-00331-g4ed9c1e971b1-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Reported-by: Eric Dumazet <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Kazunori Kobayashi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Commit 1df4d17 upstream ] This patch fixes the spelling error in firmware/efi/memmap.c, changing it to the correct word. Signed-off-by: Zheng Zhi Yuan <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Commit db01ea8 upstream ] Returning zero means success now. Signed-off-by: Liu Zixian <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Commit fdc6d38 upstream ] The EFI memory map is a description of the memory layout as provided by the firmware, and only x86 manipulates it in various different ways for its own memory bookkeeping. So let's move the memmap routines that are only used by x86 into the x86 arch tree. [ardb: minor tweaks for linux-5.10.y backport] Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Commit d85e3e3 upstream ] Currently, the EFI_PARAVIRT flag is only used by Xen dom0 boot on x86, even though other architectures also support pseudo-EFI boot, where the core kernel is invoked directly and provided with a set of data tables that resemble the ones constructed by the EFI stub, which never actually runs in that case. Let's fix this inconsistency, and always set this flag when booting dom0 via the EFI boot path. Note that Xen on x86 does not provide the EFI memory map in this case, whereas other architectures do, so move the associated EFI_PARAVIRT check into the x86 platform code. Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Commit 75dde79 upstream ] The logic in __efi_memmap_init() is shared between two different execution flows: - mapping the EFI memory map early or late into the kernel VA space, so that its entries can be accessed; - the x86 specific cloning of the EFI memory map in order to insert new entries that are created as a result of making a memory reservation via a call to efi_mem_reserve(). In the former case, the underlying memory containing the kernel's view of the EFI memory map (which may be heavily modified by the kernel itself on x86) is not modified at all, and the only thing that changes is the virtual mapping of this memory, which is different between early and late boot. In the latter case, an entirely new allocation is created that carries a new, updated version of the kernel's view of the EFI memory map. When installing this new version, the old version will no longer be referenced, and if the memory was allocated by the kernel, it will leak unless it gets freed. The logic that implements this freeing currently lives on the code path that is shared between these two use cases, but it should only apply to the latter. So move it to the correct spot. While at it, drop the dummy definition for non-x86 architectures, as that is no longer needed. Cc: <[email protected]> Fixes: f0ef652 ("efi: Fix efi_memmap_alloc() leaks") Tested-by: Ashish Kalra <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b321c31 upstream. Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when running a preemptible kernel, as it is possible that a vCPU is blocked without requesting a doorbell interrupt. The issue is that any preemption that occurs between vgic_v4_put() and schedule() on the block path will mark the vPE as nonresident and *not* request a doorbell irq. This occurs because when the vcpu thread is resumed on its way to block, vcpu_load() will make the vPE resident again. Once the vcpu actually blocks, we don't request a doorbell anymore, and the vcpu won't be woken up on interrupt delivery. Fix it by tracking that we're entering WFI, and key the doorbell request on that flag. This allows us not to make the vPE resident when going through a preempt/schedule cycle, meaning we don't lose any state. Cc: [email protected] Fixes: 8e01d9a ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put") Reported-by: Xiang Chen <[email protected]> Suggested-by: Zenghui Yu <[email protected]> Tested-by: Xiang Chen <[email protected]> Co-developed-by: Oliver Upton <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Acked-by: Zenghui Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Oliver Upton <[email protected]> [ modified to wrangle the vCPU flags directly instead of going through the flag helper macros as they have not yet been introduced. Also doing the flag wranging in the kvm_arch_vcpu_{un}blocking() hooks as the introduction of kvm_vcpu_wfi has not yet happened. See: 6109c5a ("KVM: arm64: Move vGIC v4 handling for WFI out arch callback hook") ] Signed-off-by: James Gowans <[email protected]> Acked-by: Marc Zyngier <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
[ Upstream commit cca46f8 ] '#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to the 'hdmi' node for 'rk3066a.dtsi'. Fixes: fadc780 ("ARM: dts: rockchip: add rk3066 hdmi nodes") Signed-off-by: Johan Jonker <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
[ Upstream commit 8d7ec44 ] Add the missing #sound-dai-cells for RK3368's I2S and S/PDIF controllers. Fixes: f7d89df ("arm64: dts: rockchip: add i2s nodes support for RK3368 SoCs") Fixes: 0328d68 ("arm64: dts: rockchip: add rk3368 spdif node") Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
commit e0ae713 upstream. Since the commit mentioned below __xdp_reg_mem_model() can return a NULL pointer. This pointer is dereferenced in trace_mem_connect() which leads to segfault. The trace points (mem_connect + mem_disconnect) were put in place to pair connect/disconnect using the IDs. The ID is only assigned if __xdp_reg_mem_model() does not return NULL. That connect trace point is of no use if there is no ID. Skip that connect trace point if xdp_alloc is NULL. [ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace point ] Fixes: 4a48ef7 ("xdp: Allow registering memory model without rxq reference") Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c128a1b upstream. Errata i2310[0] says, Erroneous timeout can be triggered, if this Erroneous interrupt is not cleared then it may leads to storm of interrupts. Commit 9d141c1 ("serial: 8250_omap: Implementation of Errata i2310") which added the workaround but missed ensuring RX FIFO is really empty before applying the errata workaround as recommended in the errata text. Fix this by adding back check for UART_OMAP_RX_LVL to be 0 for workaround to take effect. [0] https://www.ti.com/lit/pdf/sprz536 page 23 Fixes: 9d141c1 ("serial: 8250_omap: Implementation of Errata i2310") Cc: [email protected] Reported-by: Vignesh Raghavendra <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Udit Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit bab4923 upstream. In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from qdisc->dev_queue->dev <NULL> ->name This situation simulated from bunch of veths and Bluetooth disconnection and reconnection. During qdisc initialization, qdisc was being set to noop_queue. In veth_init_queue, the initial tx_num was reduced back to one, causing the qdisc reset to be called with noop, which led to the kernel panic. I've attached the GitHub gist link that C converted syz-execprogram source code and 3 log of reproduced vmcore-dmesg. https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740 Yeoreum and I use two fuzzing tool simultaneously. One process with syz-executor : https://github.com/google/syzkaller $ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \ -enable=none -collide=false log1 The other process with perf fuzzer: https://github.com/deater/perf_event_tests/tree/master/fuzzer $ perf_event_tests/fuzzer/perf_fuzzer I think this will happen on the kernel version. Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10. This occurred from 51270d5. I think this patch is absolutely necessary. Previously, It was showing not intended string value of name. I've reproduced 3 time from my fedora 40 Debug Kernel with any other module or patched. version: 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug [ 5287.164555] veth0_vlan: left promiscuous mode [ 5287.164929] veth1_macvtap: left promiscuous mode [ 5287.164950] veth0_macvtap: left promiscuous mode [ 5287.164983] veth1_vlan: left promiscuous mode [ 5287.165008] veth0_vlan: left promiscuous mode [ 5287.165450] veth1_macvtap: left promiscuous mode [ 5287.165472] veth0_macvtap: left promiscuous mode [ 5287.165502] veth1_vlan: left promiscuous mode … [ 5297.598240] bridge0: port 2(bridge_slave_1) entered blocking state [ 5297.598262] bridge0: port 2(bridge_slave_1) entered forwarding state [ 5297.598296] bridge0: port 1(bridge_slave_0) entered blocking state [ 5297.598313] bridge0: port 1(bridge_slave_0) entered forwarding state [ 5297.616090] 8021q: adding VLAN 0 to HW filter on device bond0 [ 5297.620405] bridge0: port 1(bridge_slave_0) entered disabled state [ 5297.620730] bridge0: port 2(bridge_slave_1) entered disabled state [ 5297.627247] 8021q: adding VLAN 0 to HW filter on device team0 [ 5297.629636] bridge0: port 1(bridge_slave_0) entered blocking state … [ 5298.002798] bridge_slave_0: left promiscuous mode [ 5298.002869] bridge0: port 1(bridge_slave_0) entered disabled state [ 5298.309444] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface [ 5298.315206] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface [ 5298.320207] bond0 (unregistering): Released all slaves [ 5298.354296] hsr_slave_0: left promiscuous mode [ 5298.360750] hsr_slave_1: left promiscuous mode [ 5298.374889] veth1_macvtap: left promiscuous mode [ 5298.374931] veth0_macvtap: left promiscuous mode [ 5298.374988] veth1_vlan: left promiscuous mode [ 5298.375024] veth0_vlan: left promiscuous mode [ 5299.109741] team0 (unregistering): Port device team_slave_1 removed [ 5299.185870] team0 (unregistering): Port device team_slave_0 removed … [ 5300.155443] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1 [ 5300.155724] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9 [ 5300.155988] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9 …. [ 5301.075531] team0: Port device team_slave_1 added [ 5301.085515] bridge0: port 1(bridge_slave_0) entered blocking state [ 5301.085531] bridge0: port 1(bridge_slave_0) entered disabled state [ 5301.085588] bridge_slave_0: entered allmulticast mode [ 5301.085800] bridge_slave_0: entered promiscuous mode [ 5301.095617] bridge0: port 1(bridge_slave_0) entered blocking state [ 5301.095633] bridge0: port 1(bridge_slave_0) entered disabled state … [ 5301.149734] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.173234] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.180517] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link [ 5301.193481] hsr_slave_0: entered promiscuous mode [ 5301.204425] hsr_slave_1: entered promiscuous mode [ 5301.210172] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.210185] Cannot create hsr debugfs directory [ 5301.224061] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link [ 5301.246901] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.255934] team0: Port device team_slave_0 added [ 5301.256480] team0: Port device team_slave_1 added [ 5301.256948] team0: Port device team_slave_0 added … [ 5301.435928] hsr_slave_0: entered promiscuous mode [ 5301.446029] hsr_slave_1: entered promiscuous mode [ 5301.455872] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.455884] Cannot create hsr debugfs directory [ 5301.502664] hsr_slave_0: entered promiscuous mode [ 5301.513675] hsr_slave_1: entered promiscuous mode [ 5301.526155] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.526164] Cannot create hsr debugfs directory [ 5301.563662] hsr_slave_0: entered promiscuous mode [ 5301.576129] hsr_slave_1: entered promiscuous mode [ 5301.580259] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.580270] Cannot create hsr debugfs directory [ 5301.590269] 8021q: adding VLAN 0 to HW filter on device bond0 [ 5301.595872] KASAN: null-ptr-deref in range [0x0000000000000130-0x0000000000000137] [ 5301.595877] Mem abort info: [ 5301.595881] ESR = 0x0000000096000006 [ 5301.595885] EC = 0x25: DABT (current EL), IL = 32 bits [ 5301.595889] SET = 0, FnV = 0 [ 5301.595893] EA = 0, S1PTW = 0 [ 5301.595896] FSC = 0x06: level 2 translation fault [ 5301.595900] Data abort info: [ 5301.595903] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 5301.595907] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 5301.595911] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 5301.595915] [dfff800000000026] address between user and kernel address ranges [ 5301.595971] Internal error: Oops: 0000000096000006 [#1] SMP … [ 5301.596076] CPU: 2 PID: 102769 Comm: syz-executor.3 Kdump: loaded Tainted: G W ------- --- 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug #1 [ 5301.596080] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023 [ 5301.596082] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 5301.596085] pc : strnlen+0x40/0x88 [ 5301.596114] lr : trace_event_get_offsets_qdisc_reset+0x6c/0x2b0 [ 5301.596124] sp : ffff8000beef6b40 [ 5301.596126] x29: ffff8000beef6b40 x28: dfff800000000000 x27: 0000000000000001 [ 5301.596131] x26: 6de1800082c62bd0 x25: 1ffff000110aa9e0 x24: ffff800088554f00 [ 5301.596136] x23: ffff800088554ec0 x22: 0000000000000130 x21: 0000000000000140 [ 5301.596140] x20: dfff800000000000 x19: ffff8000beef6c60 x18: ffff7000115106d8 [ 5301.596143] x17: ffff800121bad000 x16: ffff800080020000 x15: 0000000000000006 [ 5301.596147] x14: 0000000000000002 x13: ffff0001f3ed8d14 x12: ffff700017ddeda5 [ 5301.596151] x11: 1ffff00017ddeda4 x10: ffff700017ddeda4 x9 : ffff800082cc5eec [ 5301.596155] x8 : 0000000000000004 x7 : 00000000f1f1f1f1 x6 : 00000000f2f2f200 [ 5301.596158] x5 : 00000000f3f3f3f3 x4 : ffff700017dded80 x3 : 00000000f204f1f1 [ 5301.596162] x2 : 0000000000000026 x1 : 0000000000000000 x0 : 0000000000000130 [ 5301.596166] Call trace: [ 5301.596175] strnlen+0x40/0x88 [ 5301.596179] trace_event_get_offsets_qdisc_reset+0x6c/0x2b0 [ 5301.596182] perf_trace_qdisc_reset+0xb0/0x538 [ 5301.596184] __traceiter_qdisc_reset+0x68/0xc0 [ 5301.596188] qdisc_reset+0x43c/0x5e8 [ 5301.596190] netif_set_real_num_tx_queues+0x288/0x770 [ 5301.596194] veth_init_queues+0xfc/0x130 [veth] [ 5301.596198] veth_newlink+0x45c/0x850 [veth] [ 5301.596202] rtnl_newlink_create+0x2c8/0x798 [ 5301.596205] __rtnl_newlink+0x92c/0xb60 [ 5301.596208] rtnl_newlink+0xd8/0x130 [ 5301.596211] rtnetlink_rcv_msg+0x2e0/0x890 [ 5301.596214] netlink_rcv_skb+0x1c4/0x380 [ 5301.596225] rtnetlink_rcv+0x20/0x38 [ 5301.596227] netlink_unicast+0x3c8/0x640 [ 5301.596231] netlink_sendmsg+0x658/0xa60 [ 5301.596234] __sock_sendmsg+0xd0/0x180 [ 5301.596243] __sys_sendto+0x1c0/0x280 [ 5301.596246] __arm64_sys_sendto+0xc8/0x150 [ 5301.596249] invoke_syscall+0xdc/0x268 [ 5301.596256] el0_svc_common.constprop.0+0x16c/0x240 [ 5301.596259] do_el0_svc+0x48/0x68 [ 5301.596261] el0_svc+0x50/0x188 [ 5301.596265] el0t_64_sync_handler+0x120/0x130 [ 5301.596268] el0t_64_sync+0x194/0x198 [ 5301.596272] Code: eb15001f 54000120 d343fc02 12000801 (38f46842) [ 5301.596285] SMP: stopping secondary CPUs [ 5301.597053] Starting crashdump kernel... [ 5301.597057] Bye! After applying our patch, I didn't find any kernel panic errors. We've found a simple reproducer # echo 1 > /sys/kernel/debug/tracing/events/qdisc/qdisc_reset/enable # ip link add veth0 type veth peer name veth1 Error: Unknown device type. However, without our patch applied, I tested upstream 6.10.0-rc3 kernel using the qdisc_reset event and the ip command on my qemu virtual machine. This 2 commands makes always kernel panic. Linux version: 6.10.0-rc3 [ 0.000000] Linux version 6.10.0-rc3-00164-g44ef20baed8e-dirty (paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld version 2.41-34.fc40) #20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024 Kernel panic message: [ 615.236484] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 615.237250] Dumping ftrace buffer: [ 615.237679] (ftrace buffer empty) [ 615.238097] Modules linked in: veth crct10dif_ce virtio_gpu virtio_dma_buf drm_shmem_helper drm_kms_helper zynqmp_fpga xilinx_can xilinx_spi xilinx_selectmap xilinx_core xilinx_pr_decoupler versal_fpga uvcvideo uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev videobuf2_common mc usbnet deflate zstd ubifs ubi rcar_canfd rcar_can omap_mailbox ntb_msi_test ntb_hw_epf lattice_sysconfig_spi lattice_sysconfig ice40_spi gpio_xilinx dwmac_altr_socfpga mdio_regmap stmmac_platform stmmac pcs_xpcs dfl_fme_region dfl_fme_mgr dfl_fme_br dfl_afu dfl fpga_region fpga_bridge can can_dev br_netfilter bridge stp llc atl1c ath11k_pci mhi ath11k_ahb ath11k qmi_helpers ath10k_sdio ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 drm fuse backlight ipv6 Jun 22 02:36:5[3 6k152.62-4sm98k4-0k]v kCePUr:n e1l :P IUDn:a b4le6 8t oC ohmma: nidpl eN oketr nteali nptaedg i6n.g1 0re.0q-urecs3t- 0at0 1v6i4r-tgu4a4le fa2d0dbraeeds0se-dir tyd f#f2f08 615.252376] Hardware name: linux,dummy-virt (DT) [ 615.253220] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 615.254433] pc : strnlen+0x6c/0xe0 [ 615.255096] lr : trace_event_get_offsets_qdisc_reset+0x94/0x3d0 [ 615.256088] sp : ffff800080b269a0 [ 615.256615] x29: ffff800080b269a0 x28: ffffc070f3f98500 x27: 0000000000000001 [ 615.257831] x26: 0000000000000010 x25: ffffc070f3f98540 x24: ffffc070f619cf60 [ 615.259020] x23: 0000000000000128 x22: 0000000000000138 x21: dfff800000000000 [ 615.260241] x20: ffffc070f631ad00 x19: 0000000000000128 x18: ffffc070f448b800 [ 615.261454] x17: 0000000000000000 x16: 0000000000000001 x15: ffffc070f4ba2a90 [ 615.262635] x14: ffff700010164d73 x13: 1ffff80e1e8d5eb3 x12: 1ffff00010164d72 [ 615.263877] x11: ffff700010164d72 x10: dfff800000000000 x9 : ffffc070e85d6184 [ 615.265047] x8 : ffffc070e4402070 x7 : 000000000000f1f1 x6 : 000000001504a6d3 [ 615.266336] x5 : ffff28ca21122140 x4 : ffffc070f5043ea8 x3 : 0000000000000000 [ 615.267528] x2 : 0000000000000025 x1 : 0000000000000000 x0 : 0000000000000000 [ 615.268747] Call trace: [ 615.269180] strnlen+0x6c/0xe0 [ 615.269767] trace_event_get_offsets_qdisc_reset+0x94/0x3d0 [ 615.270716] trace_event_raw_event_qdisc_reset+0xe8/0x4e8 [ 615.271667] __traceiter_qdisc_reset+0xa0/0x140 [ 615.272499] qdisc_reset+0x554/0x848 [ 615.273134] netif_set_real_num_tx_queues+0x360/0x9a8 [ 615.274050] veth_init_queues+0x110/0x220 [veth] [ 615.275110] veth_newlink+0x538/0xa50 [veth] [ 615.276172] __rtnl_newlink+0x11e4/0x1bc8 [ 615.276944] rtnl_newlink+0xac/0x120 [ 615.277657] rtnetlink_rcv_msg+0x4e4/0x1370 [ 615.278409] netlink_rcv_skb+0x25c/0x4f0 [ 615.279122] rtnetlink_rcv+0x48/0x70 [ 615.279769] netlink_unicast+0x5a8/0x7b8 [ 615.280462] netlink_sendmsg+0xa70/0x1190 Yeoreum and I don't know if the patch we wrote will fix the underlying cause, but we think that priority is to prevent kernel panic happening. So, we're sending this patch. Fixes: 51270d5 ("tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string") Link: https://lore.kernel.org/lkml/[email protected]/t/ Cc: [email protected] Tested-by: Yunseong Kim <[email protected]> Signed-off-by: Yunseong Kim <[email protected]> Signed-off-by: Yeoreum Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected] Tested-by: Jon Hunter <[email protected]> Tested-by: Pavel Machek (CIP) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Jon Hunter <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Salvatore Bonaccorso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
DaftB0t
requested review from
lionel,
luckshot,
ts-kris,
michael-ts,
markfeathers and
randytsi369
markfeathers
approved these changes
Jul 8, 2024
ts-kris
approved these changes
Jul 8, 2024
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Sync with upstream v5.10.221