Nodemailer is an easy to use module to send e-mails with Node.JS (using SMTP or sendmail or Amazon SES) and is unicode friendly - You can use any characters you like ✔
Nodemailer is Windows friendly, you can install it with npm on Windows just like any other module, there are no compiled dependencies. Use it from Azure or from your Windows box hassle free.
Read about using Nodemailer from the Node Knockout blog
- Unicode to use any characters
- HTML content as well as plain text alternative
- Attachments (including attachment streaming for sending larger files)
- Embedded images in HTML
- SSL/STARTTLS for secure e-mail delivery
- Different transport methods - SMTP, sendmail and Amazon SES
- SMTP Connection pool and connection reuse for rapid delivery
- Preconfigured services for using SMTP with Gmail, Hotmail etc.
- Use objects as header values for SendGrid SMTP API
- XOAUTH2 authentication and token generation support - useful with Gmail
- DKIM signing
- Send e-mail from command line
Nodemailer has been tested successfully on the following PaaS platforms (using free/trial accounts):
If you want to parse generated or received e-mail instead of sending it, check out MailParser.
If you only want to generate the raw e-mail stream, check out MailComposer.
If you only want to communicate with the SMTP (both as client and the server), check out simplesmtp.
To use Nodemailer with templates, please see documentation for node-email-templates.
This is a complete example to send an e-mail with plaintext and HTML body
var nodemailer = require("nodemailer");
// create reusable transport method (opens pool of SMTP connections)
var smtpTransport = nodemailer.createTransport("SMTP",{
service: "Gmail",
auth: {
user: "[email protected]",
pass: "userpass"
}
});
// setup e-mail data with unicode symbols
var mailOptions = {
from: "Fred Foo ✔ <[email protected]>", // sender address
to: "[email protected], [email protected]", // list of receivers
subject: "Hello ✔", // Subject line
text: "Hello world ✔", // plaintext body
html: "<b>Hello world ✔</b>" // html body
}
// send mail with defined transport object
smtpTransport.sendMail(mailOptions, function(error, response){
if(error){
console.log(error);
}else{
console.log("Message sent: " + response.message);
}
// if you don't want to use this transport object anymore, uncomment following line
//smtpTransport.close(); // shut down the connection pool, no more messages
});
See also the examples folder for full featured examples
Install through NPM
npm install nodemailer
Include the module
var nodemailer = require("nodemailer");
An e-mail can be sent with sendMail(mailOptions[, callback])
command
transport.sendMail(mailOptions, callback);
Where
transport
is a transport object created from thenodemailer.createTransport
method- mailOptions defines the e-mail (set its subject, body text, receivers etc.), see E-mail Message Fields for details
- callback is the callback function that will be run after the e-mail is sent or the sending failed (see Return callback for details)
Before you can send any e-mails you need to set up a transport method. This can
be done with nodemailer.createTransport(type, options)
where type
indicates
the transport protocol and options
defines how it is used.
var transport = nodemailer.createTransport("SMTP", {smtp_options});
The same transport object can and should be reused several times.
When the transport method is defined, it can be used to send e-mail with sendMail
var transport = nodemailer.createTransport("SMTP", {smtp_options});
transport.sendMail({
from: "[email protected]",
to: "[email protected]"
...
});
Required type
parameter can be one of the following:
- SMTP for using SMTP
- SES for using Amazon SES
- Sendmail for utilizing systems sendmail command
SMTP is different from the other transport mechanisms, as in its case a connection pool is created. All the connections try to stay alive as long as possible and are reusable to minimize the protocol overhead delay - for example setting up TLS for authenticating is relatively lengthy process (in CPU terms, not by human terms), you do not want to do it several times.
Possible SMTP options are the following:
- service - an optional well known service identifier ("Gmail", "Hotmail" etc., see Well known Services for a list of supported services) to auto-configure host, port and secure connection settings
- host - hostname of the SMTP server (defaults to "localhost", not needed with
service
) - port - port of the SMTP server (defaults to 25, not needed with
service
) - secureConnection - use SSL (default is
false
, not needed withservice
). If you're using port 587 then keepsecureConnection
false, since the connection is started in insecure plain text mode and only later upgraded with STARTTLS - name - the name of the client server (defaults to machine name)
- auth - authentication object as
{user:"...", pass:"..."}
or{XOAuth2: {xoauth2_options}}
or{XOAuthToken: "base64data"}
- ignoreTLS - ignore server support for STARTTLS (defaults to
false
) - debug - output client and server messages to console
- maxConnections - how many connections to keep in the pool (defaults to 5)
Example:
var transport = nodemailer.createTransport("SMTP", {
service: "Gmail",
auth: {
user: "[email protected]",
pass: "userpass"
}
});
or the same without service
parameter
var transport = nodemailer.createTransport("SMTP", {
host: "smtp.gmail.com", // hostname
secureConnection: true, // use SSL
port: 465, // port for secure SMTP
auth: {
user: "[email protected]",
pass: "userpass"
}
});
NB! if you want to close the pool (cancel all open connections) you can use transport.close()
var transport = nodemailer.createTransport("SMTP",{});
...
transport.close(); // close the pool
nodemailer supports XOAUTH2 authentication protocol. To use this you need to obtain a Client ID and a Client Secret from Google API Console (Open "API Access" and create "Client ID for web applications") and then request a refresh token for an user. See Google OAuth 2.0 Offline Access for more information.
Once you have obtained the Client ID, Client Secret and a Refresh Token for an user, you can use these values to send mail on behalf of the user.
var transportOptions = {
...,
auth: {
XOAuth2: {
user: "[email protected]",
clientId: "8819981768.apps.googleusercontent.com",
clientSecret: "{client_secret}",
refreshToken: "1/xEoDL4iW3cxlI7yDbSRFYNG01kVKM2C-259HOF2aQbI",
accessToken: "vF9dft4qmTc2Nvb3RlckBhdHRhdmlzdGEuY29tCg==",
timeout: 3600
}
}
}
accessToken
and timeout
values are both optional. If XOAUTH2 login fails a new access token is generated automatically and the login is retried.
Older XOAUTH is also supporteb by nodemailer for SMTP. XOAUTH is based on OAuth protocol 1.0 and is considered deprecated.
To use this, include XOAuthToken
option in auth
instead of the regular user
and pass
.
var transportOptions = {
...,
auth: {
XOAuthToken: "R0VUIGh0dHBzOi8vbWFpbC5nb29...."
}
}
nodemailer includes also built in XOAUTH token generator which can be used
with nodemailer.createXOAuthGenerator()
. The function is preconfigured for
Gmail, so in this case only mandatory options are user
, token
and tokenSecret
.
var XOAuthTokenGenerator = nodemailer.createXOAuthGenerator({
user: "[email protected]",
// requestUrl: "https://oauth.access.point",
// consumerKey: "anonymous",
// consumerSecret: "anonymous",
token: "1/O_HgoO4h2uOUfpus0V--7mygICXrQQ0ZajB3ZH52KqM",
tokenSecret: "_mUBkIwNPnfQBUIWrJrpXJ0c"
});
One of user
or requestUrl
is mandatory. consumerKey
and consumerSecret
both
default to "anonymous"
.
var transportOptions = {
service: "Gmail",
auth: {
XOAuthToken: nodemailer.createXOAuthGenerator({
user: "[email protected]",
token: "1/O_HgoO4h2uOUfpus0V--7mygICXrQQ0ZajB3ZH52KqM",
tokenSecret: "_mUBkIwNPnfQBUIWrJrpXJ0c"
})
}
}
SES is actually a HTTP based protocol, the compiled e-mail and related info (signatures and such) are sent as a HTTP request to SES servers.
Possible SES options are the following:
- AWSAccessKeyID - AWS access key (required)
- AWSSecretKey - AWS secret (required)
- ServiceUrl - optional API end point URL (defaults to "https://email.us-east-1.amazonaws.com")
Example:
var transport = nodemailer.createTransport("SES", {
AWSAccessKeyID: "AWSACCESSKEY",
AWSSecretKey: "AWS/Secret/key"
});
Sendmail transport method streams the compiled message to the stdin of sendmail command.
Options object is optional, possible sendmail options are the following:
- path - path to the
sendmail
command (defaults to "sendmail") - args - an array of extra command line options to pass to the
sendmail
command (ie.["-f [email protected]"]
)
Example:
var transport = nodemailer.createTransport("sendmail");
or
var transport = nodemailer.createTransport("sendmail", {
path: "/usr/local/bin/sendmail",
args: ["-f [email protected]"]
});
Nodemailer supports DKIM signing with very simple setup. Use this with caution though since the generated message needs to be buffered entirely before it can be signed. Not a big deal with small messages but might consume a lot of RAM when using larger attachments.
Set up the DKIM signing with useDKIM
method for a transport object:
transport.useDKIM(dkimOptions)
Where dkimOptions
includes necessary options for signing
- domainName - the domainname that is being used for signing
- keySelector - key selector. If you have set up a TXT record with DKIM public key at zzz._domainkey.blurdybloop.com then
zzz
is the selector - privateKey - DKIM private key that is used for signing as a string
- headerFieldNames - optional colon separated list of header fields to sign, by default all fields suggested by RFC4871 #5.5 are used
All messages transmitted through this transport objects are from now on DKIM signed.
Currently if several header fields with the same name exists, only the last one (the one in the bottom) is signed.
Example:
var transport = nodemailer.createTransport("Sendmail");
transport.useDKIM({
domainName: "kreata.ee",
keySelector: "dkim",
privateKey: fs.readFileSync("private_key.pem")
});
transport.sendMail(mailOptions);
See examples/example_dkim.js for a complete example.
NB! Be careful when using services like Gmail, SES etc. through SMTP
(SES API is handled by Nodemailer automatically) - these tend to modify some
headers like Message-Id or Date which invalidates the signature. In this case use
headerFieldNames
property to define only fields that won't be changed and leave
out Date
or any other unsupported field.
If you want to use a well known service as the SMTP host, you do not need
to enter the hostname or port number, just use the service
parameter
Currently supported services are:
- DynectEmail
- Gmail
- hot.ee
- Hotmail
- iCloud
- mail.ee
- Mail.Ru
- Mailgun
- Mandrill
- Postmark
- SendGrid
- SES
- Yahoo
- yandex
- Zoho
Predefined service data covers host
, port
and secure connection settings,
any other parameters (ie. auth
) need to be set separately. Service names are
case insensitive, so using "gmail" instead of "Gmail" is totally fine.
Example:
var smtpTransport = nodemailer.createTransport("SMTP",{
service: "Gmail", // sets automatically host, port and connection security settings
auth: {
user: "[email protected]",
pass: "userpass"
}
});
The following are the possible fields of an e-mail message:
- from - The e-mail address of the sender. All e-mail addresses can be plain
[email protected]
or formattedSender Name <[email protected]>
- to - Comma separated list or an array of recipients e-mail addresses that will appear on the
To:
field - cc - Comma separated list or an array of recipients e-mail addresses that will appear on the
Cc:
field - bcc - Comma separated list or an array of recipients e-mail addresses that will appear on the
Bcc:
field - replyTo - An e-mail address that will appear on the
Reply-To:
field - inReplyTo - The message-id this message is replying
- references - Message-id list
- subject - The subject of the e-mail
- text - The plaintext version of the message
- html - The HTML version of the message
- generateTextFromHTML - if set to true uses HTML to generate plain text body part from the HTML if the text is not defined
- headers - An object of additional header fields
{"X-Key-Name": "key value"}
(NB! values are passed as is, you should do your own encoding to 7bit if needed) - attachments - An array of attachment objects.
- envelope - optional SMTP envelope, if auto generated envelope is not suitable
- messageId - optional Message-Id value, random value will be generated if not set. Set to false to omit the Message-Id header
- date - optional Date value, current UTC string will be used if not set
- encoding - optional transfer encoding for the textual parts (defaults to "quoted-printable")
- charset - optional output character set for the textual parts (defaults to "utf-8")
All text fields (e-mail addresses, plaintext body, html body) use UTF-8 as the encoding. Attachments are streamed as binary.
Example:
var transport = nodemailer.createTransport("Sendmail");
var mailOptions = {
from: "[email protected]",
to: "[email protected]",
subject: "Hello world!",
text: "Plaintext body"
}
transport.sendMail(mailOptions);
Nodemailer supports SendGrid SMTP API out of the box - you can use objects as header values and these are automatically JSONized (and mime encoded if needed).
var mailOptions = {
...,
headers: {
'X-SMTPAPI': {
category : "newuser",
sub:{
"%name%": ["Žiguli Õllepruul"]
}
}
},
subject: "Hello, %name%"
}
This also applies to any other service that expects a JSON string as a header value for specified key.
If generateTextFromHTML
option is set to true, then HTML contents of the mail is automatically converted
to plaintext format when plaintext content is empty or missing.
For example
mailOptions = {
...,
generateTextFromHTML: true,
html: '<h1>Hello world</h1><p><b>How</b> are you?',
// text: '' // no text part
}
is automatically converted in the backround by Nodemailer to:
mailOptions = {
...,
// source html:
html: '<h1>Hello world</h1><p><b>How</b> are you?',
// automatically generated plaintext message:
text: "Hello world\n"+
"===========\n"+
"\n"+
"**How** are you?"
}
As you can see the output syntax for generateTextFromHTML
looks similar to markdown, and that
is exactly the case here - Nodemailer includes a simple HTML to markdown converter. But don't
expect too much from it, it's not full featured or perfect, just some regexes here and there.
Attachment object consists of the following properties:
- fileName - filename to be reported as the name of the attached file, use of unicode is allowed (except when using Amazon SES which doesn't like it)
- cid - optional content id for using inline images in HTML message source
- contents - String or a Buffer contents for the attachment
- filePath - path to a file or an URL if you want to stream the file instead of including it (better for larger attachments)
- streamSource - Stream object for arbitrary binary streams if you want to stream the contents (needs to support pause/resume)
- contentType - optional content type for the attachment, if not set will be derived from the
fileName
property - contentDisposition - optional content disposition type for the attachment, defaults to "attachment"
One of contents
, filePath
or streamSource
must be specified, if none is
present, the attachment will be discarded. Other fields are optional.
Attachments can be added as many as you want.
var mailOptions = {
...
attachments: [
{ // utf-8 string as an attachment
fileName: "text1.txt",
contents: "hello world!"
},
{ // binary buffer as an attachment
fileName: "text2.txt",
contents: new Buffer("hello world!","utf-8")
},
{ // file on disk as an attachment
fileName: "text3.txt",
filePath: "/path/to/file.txt" // stream this file
},
{ // fileName and content type is derived from filePath
filePath: "/path/to/file.txt"
},
{ // stream as an attachment
fileName: "text4.txt",
streamSource: fs.createReadStream("file.txt")
},
{ // define custom content type for the attachment
fileName: "text.bin",
contents: "hello world!",
contentType: "text/plain"
},
{ // use URL as an attachment
fileName: "license.txt",
filePath: "https://raw.github.com/andris9/Nodemailer/master/LICENSE"
}
]
}
All the e-mail addresses can be plain e-mail address
or with formatted name (includes unicode support)
"Ноде Майлер" <[email protected]>
To, Cc and Bcc fields accept comma separated list of e-mails or an array of emails or an array of comma separated list of e-mails - use it as you like. Formatting can be mixed.
...,
to: '[email protected], "Ноде Майлер" <[email protected]>, "Name, User" <[email protected]>',
cc: ['[email protected]', '"Ноде Майлер" <[email protected]>, "Name, User" <[email protected]>']
...
You can even use unicode domain and user names, these are automatically converted to the supported form
"Unicode Domain" <info@müriaad-polüteism.info>
SMTP envelope is usually auto generated from from
, to
, cc
and bcc
fields but
if for some reason you want to specify it yourself, you can do it with envelope
property.
envelope
is an object with the following params: from
, to
, cc
and bcc
just like
with regular mail options. You can also use the regular address format, unicode domains etc.
mailOptions = {
...,
from: "[email protected]",
to: "[email protected]",
envelope: {
from: "Daemon <[email protected]>",
to: "[email protected], Mailer <[email protected]>"
}
}
The envelope only applies when using SMTP or sendmail, setting envelope has no effect with SES.
Attachments can be used as embedded images in the HTML body. To use this
feature, you need to set additional property of the attachment - cid
(unique
identifier of the file) which is a reference to the attachment file. The same
cid
value must be used as the image URL in HTML (using cid:
as the URL
protocol, see example below).
NB! the cid value should be as unique as possible!
var mailOptions = {
...
html: "Embedded image: <img src='cid:[email protected]' />",
attachments: [{
filename: "image.png",
filePath: "/path/to/file",
cid: "[email protected]" //same cid value as in the html img src
}]
}
Automatic embedding images
If you want to convert images in the HTML to embedded images automatically, you can
set mail option forceEmbeddedImages
to true. In this case all images in
the HTML that are either using an absolute URL (http://...) or absolute file path
(/path/to/file) are replaced with embedded attachments.
For example when using this code
var mailOptions = {
forceEmbeddedImages: true
html: 'Embedded image: <img src="http://example.com/image.png">'
};
The image linked is fetched and added automatically as an attachment and the url
in the HTML is replaced automatically with a proper cid:
string.
Return callback gets two parameters
- error - an error object if the message failed
- responseStatus - an object with some information about the status on success
- responseStatus.messageId - message ID used with the message
Example:
nodemailer.sendMail(mailOptions, function(error, responseStatus){
if(!error){
console.log(responseStatus.message); // response from the server
console.log(responseStatus.messageId); // Message-ID value used
}
});
NB! Some SMTP providers (like SES) overwrite Nodemailer defined Message-ID value.
If installed globally with -g, ndoemailer command enables to send mail from the command line. Run nodemailer --help for usage instructions.
npm install -g nodemailer
nodemailer --help
And the response should be
Send mail with Nodemailer
http://github.com/andris9/Nodemailer
Syntax:
nodemailer [options]
--help show this message
--transport=[transport] "smtp", "ses", "sendmail"
--debug=true show debug log
SMTP options
--host=[hostname] SMTP server hostname
--port=[port] SMTP server port
--secure=[true:false] Use SSL when connecting
--user=[username] SMTP username
--pass=[password] SMTP password
Amazon SES options
--key=[AWSKey] Amazon SES key
--secret=[AWSSecret] Amazon SES secret
Mail options
--from=[address] Sender of the mail
--to=[addresslist] Comma separated list of To: addresses
--cc=[addresslist] Comma separated list of Cc: addresses
--bcc=[addresslist] Comma separated list of Bcc: addresses
--subject=[subject] Message subject
--text=[plaintext] Plain text mail body
--html=[html] HTML mail body
--textFile=[path] Plain text mail body from a file
--htmlFile=[path] HTML mail body from a file
--stdin=[target] Read "text" or "html" from stdin
--attachments=[pathlist] Comma separated list of file paths
Example
nodemailer --host=smtp.gmail.com --port=465 --secure=true --user="[email protected]" --pass="mypass" --from="[email protected]" --to="[email protected]" --subject="test" --text="hello world!"
Run the tests with npm in Nodemailer's directory
npm test
There aren't currently many tests for Nodemailer but there are a lot of tests in the modules that are used to generate the raw e-mail body and to use the SMTP client connection.
Nodemailer in itself is actually more like a wrapper for my other modules mailcomposer for composing the raw message stream and simplesmtp for delivering it, by providing an unified API. If there's some problems with particular parts of the message composing/sending process you should look at the appropriate module.
Nodemailer is licensed under MIT license. Basically you can do whatever you want to with it.