NetAdapterLso

NetAdapterLso

Parameters

Parameter	Attribute	DataType	Description	Allowed Values
Name	Key	String	Specifies the name of network adapter.
Protocol	Key	String	Specifies which protocol to make changes to.	V1IPv4, IPv4, IPv6
State	Required	Boolean	Specifies whether LSO should be enabled or disabled.

Description

This resource is used to enable or disable LSO for specific protocols on a network adapter.

The following table shows configuration overlap with NetAdapterAdvancedProperty.

NetAdapterLso		NetAdapterAdvancedProperty
V1IPv4	=	Not Available
IPv4	=	*LsoV2IPv4
IPv6	=	*LsoV2IPv6

Examples

Example 1

This configuration disables LSO for IPv6 on the network adapter.

Configuration NetAdapterLso_DisableLsoIPv6_Config
{
    Import-DSCResource -ModuleName NetworkingDsc

    Node localhost
    {
        NetAdapterLso DisableLsoIPv6
        {
            Name     = 'Ethernet'
            Protocol = 'IPv6'
            State    = $false
        }
    }
}

Example 2

This configuration disables LSO for IPv4 on the network adapter.

Configuration NetAdapterLso_DisableLsoIPv4_Config
{
    Import-DSCResource -ModuleName NetworkingDsc

    Node localhost
    {
        NetAdapterLso DisableLsoIPv4
        {
            Name     = 'Ethernet'
            Protocol = 'IPv4'
            State    = $false
        }
    }
}