Bandwidth tracker for OpenWRT

This Luci module uses wrtbwmon to track bandwidth usage.

Features

• Auto refresh every 5 seconds (can be changed)
• Track speed per client (if auto refresh is enabled)
• No cron job required (wrtbwmon is updated on demand)
• Map MAC addresses to usernames by editing a file from the UI.
• Ability to persist database across reboots and firmware updates

After installation you will see a new Usage menu item inside the Network menu list in the Luci GUI.

What it does

It displays a table that includes all columns wrtbwmon provides, with two additional ones (emphasis given):

1. Client
2. Download speed
3. Upload speed
4. Total downloaded
5. Total uploaded
6. Total usage
7. First seen date
8. Last seen date

How it works

The download/upload speed is calculated in memory on the front end using JS thus minimizing resource consumption on the router. To properly calculate these values an auto refresh interval must be set that runs the following commands on the router:

• wrtbwmon update /tmp/usage.db
• wrtbwmon publish /tmp/usage.db /tmp/usage.htm /etc/wrtbwmon.user

For the above commands to work the only requirement is that the wrtbwmon package is installed and enabled.

Install

Step 1 - install the wrtbwmon package:

• Download the latest .ipk file from wrtbwmon releases
• Copy the file to your router /tmp directory
  • I use the following command: scp wrtbwmon_*_all.ipk [email protected]:/tmp/
• Install the package opkg install /tmp/wrtbwmon_*_all.ipk

Step 2 - setup* the wrtbwmon package:

• Schedule it to run on startup /etc/init.d/wrtbwmon enable
• Manually start it now /etc/init.d/wrtbwmon start

*If you have already setup a cron job to update the wrtbwmon database, it would be best if you removed it. There is no need for wrtbwmon to regurarly update the db since we only need to run it when the Usage page is active.

Step 3 - install this module:

• Download the latest .ipk file from releases
• Copy the file to your router /tmp directory
  • I use the following command: scp luci_wrtbwmon_*_all.ipk [email protected]:/tmp/
• Install the package opkg install /tmp/luci_wrtbwmon_*_all.ipk
• Clear the cache for luci to get the web interface to refresh rm /tmp/luci-indexcache

TODO

• Add the .ipk package to the OpenWRT feed

Contribute

Feel free to contribute on any of the above TODO items, or even on any feature you might think is helpful. I would appreciate any help.

Credits

A big thanks to

• pyrovski for creating wrtbwmon and helping me with creating the .ipk package
• OpenWRT organization for creating and maintaining openwrt and luci
• Carl Worth [email protected] for his ipkg-build script that lies in this repo