Skip to content

Commit

Permalink
Revert "ath79: elecom,wab: use nvmem"
Browse files Browse the repository at this point in the history
This reverts commit 70e41d0.

"ethaddr" is stored into the "u-boot-env" (stock: "Config") partition
and it's quoted with double-quotations, but that format is not supported
by the current NVMEM u-boot-env driver (and mac_pton() function) and the
MAC address won't be parsed to byte array.
This causes random MAC addresses on the adapters, so revert the above
commit.

Signed-off-by: INAGAKI Hiroshi <[email protected]>
Link: openwrt#17116
(cherry picked from commit af611bc)
Link: openwrt#17117
Signed-off-by: Robert Marko <[email protected]>
  • Loading branch information
musashino205 authored and robimarko committed Nov 29, 2024
1 parent c981096 commit d276b4c
Show file tree
Hide file tree
Showing 3 changed files with 17 additions and 13 deletions.
17 changes: 4 additions & 13 deletions target/linux/ath79/dts/qca955x_elecom_wab.dtsi
Original file line number Diff line number Diff line change
Expand Up @@ -8,7 +8,6 @@

/ {
aliases {
label-mac-device = &eth0;
led-boot = &led_status;
led-failsafe = &led_status;
led-upgrade = &led_status;
Expand Down Expand Up @@ -108,9 +107,6 @@
phy-mode = "rgmii-rxid";
pll-data = <0xae000000 0x80000101 0x80001313>;

nvmem-cells = <&macaddr_uboot_ethaddr 0>;
nvmem-cell-names = "mac-address";

gmac-config {
device = <&gmac>;

Expand Down Expand Up @@ -148,8 +144,8 @@
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&cal_art_5000>, <&macaddr_uboot_ethaddr 1>;
nvmem-cell-names = "calibration", "mac-address";
nvmem-cells = <&cal_art_5000>;
nvmem-cell-names = "calibration";
};
};

Expand All @@ -173,14 +169,9 @@
};

partition@40000 {
compatible = "u-boot,env";
label = "u-boot-env";
reg = <0x40000 0x10000>;
read-only;

macaddr_uboot_ethaddr: ethaddr {
#nvmem-cell-cells = <1>;
};
};

partition@50000 {
Expand Down Expand Up @@ -261,6 +252,6 @@
&wmac {
status = "okay";

nvmem-cells = <&cal_art_1000>, <&macaddr_uboot_ethaddr 0>;
nvmem-cell-names = "calibration", "mac-address";
nvmem-cells = <&cal_art_1000>;
nvmem-cell-names = "calibration";
};
3 changes: 3 additions & 0 deletions target/linux/ath79/generic/base-files/etc/board.d/02_network
Original file line number Diff line number Diff line change
Expand Up @@ -717,6 +717,9 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
;;
elecom,wab-i1750-ps|\
elecom,wab-s1167-ps|\
elecom,wab-s600-ps|\
engenius,ecb1200|\
engenius,ecb1750)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
Expand Down
Original file line number Diff line number Diff line change
Expand Up @@ -42,6 +42,16 @@ case "$board" in
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
elecom,wab-i1750-ps|\
elecom,wab-s1167-ps|\
elecom,wab-s600-ps)
# set the 5G MAC address (= ethaddr + 1)
[ "$PHYNBR" -eq 0 ] && \
macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1 > /sys${DEVPATH}/macaddress
# set the 2.4G MAC address (= ethaddr)
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii u-boot-env "ethaddr" > /sys${DEVPATH}/macaddress
;;
engenius,ecb1200|\
engenius,ecb1750)
[ "$PHYNBR" -eq 0 ] && \
Expand Down

0 comments on commit d276b4c

Please sign in to comment.