meditek: add support for RouteRich AX3000 - MediaTek MT7981 RFB

NoNameChina router - RouteRich AX3000 - MediaTek MT7981 RFB - ZROUTER R-ZCQ1 SoC: MT7981BA RAM: ESMT M15T2G16128A (1G) Flash: SPI-NAND ESMT F50L1G41LB (128M) Switch: MT7531AE Wi-Fi: MT7976GN PCB: ZR-3020_V1.2 USB 2.0x1 Button: 2 (Mesh, Reset) LED: 7 GPIO (Power, WiFi, MESH, LAN1-3, WAN) Signed-off-by: Maximilian Weinmann <[email protected]> fix init fix fix lan Signed-off-by: mishar some changes some changes Signed-off-by: Mikhail Zhilkin <[email protected]> (cherry picked from commit 6848375) Update mt7981b-routerich-ax3000.dts Update mt7981b-routerich-ax3000.dts fff Update mt7981b-routerich-ax3000.dts Add files via upload fix usb Signed-off-by: Mikhail Zhilkin <[email protected]>
csharper2005 · Oct 15, 2023 · 970e474 · 970e474
1 parent bd4f415
commit 970e474
Show file tree

Hide file tree

Showing 7 changed files with 357 additions and 2 deletions.
diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic
@@ -40,7 +40,8 @@ bananapi,bpi-r3)
 glinet,gl-mt3000)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
 	;;
-mercusys,mr90x-v1)
+mercusys,mr90x-v1|\
+routerich,ax3000)
 	local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
 	ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
 	;;

diff --git a/target/linux/mediatek/dts/mt7981b-routerich-ax3000.dts b/target/linux/mediatek/dts/mt7981b-routerich-ax3000.dts
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/dts-v1/;
+#include "mt7981.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Routerich AX3000";
+	compatible = "routerich,ax3000", "mediatek,mt7981";
+
+	aliases {
+		label-mac-device = &wan;
+
+		led-boot = &led_status_blue;
+		led-failsafe = &led_status_blue;
+		led-running = &led_status_blue;
+		led-upgrade = &led_status_blue;
+
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x10000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		mesh {
+			label = "mesh";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset Button";
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "blue:wifi_5g";
+			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1radio";
+		};
+
+		led-1 {
+			label = "amber:wan";
+			gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_blue: led-2 {
+			label = "blue:status";
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+
+		led-3 {
+			label = "blue:lan1";
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			label = "blue:lan2";
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			label = "blue:lan3";
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			label = "blue:wan";
+			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			label = "blue:wifi_2g";
+			gpios = <&pio 34 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0radio";
+		};
+
+		led-8 {
+			label = "blue:mesh";
+			gpios = <&pio 35 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		nvmem-cells = <&macaddr_factory_2a>;
+		nvmem-cell-names = "mac-address";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+};
+
+&mdio_bus {
+	switch: switch@0 {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	status = "okay";
+
+	spi_nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		reg = <0>;
+
+		spi-max-frequency = <52000000>;
+
+		spi-cal-enable;
+		spi-cal-mode = "read-data";
+		spi-cal-datalen = <7>;
+		spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
+		spi-cal-addrlen = <5>;
+		spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
+
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+		mediatek,nmbm;
+		mediatek,bmt-max-ratio = <1>;
+		mediatek,bmt-max-reserved-blocks = <64>;
+
+		mediatek,bmt-remap-range =
+			<0x0 0x580000>,
+			<0x6580000 0x6680000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0_all {
+				label = "spi0.0";
+				reg = <0x0 0x8000000>;
+				read-only;
+			};
+
+			partition@0 {
+				label = "BL2";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				reg = <0x100000 0x80000>;
+			};
+
+			factory: partition@180000 {
+				label = "Factory";
+				reg = <0x180000 0x200000>;
+				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_factory_24: macaddr@24 {
+					reg = <0x24 0x6>;
+				};
+
+				macaddr_factory_2a: macaddr@2a {
+					reg = <0x2a 0x6>;
+				};
+			};
+
+			partition@380000 {
+				label = "FIP";
+				reg = <0x380000 0x200000>;
+				read-only;
+			};
+
+			partition@580000 {
+				label = "ubi";
+				reg = <0x580000 0x4000000>;
+			};
+
+			partition@4580000 {
+				label = "firmware_backup";
+				reg = <0x4580000 0x2000000>;
+				read-only;
+			};
+
+			partition@6580000 {
+				label = "zrsave";
+				reg = <0x6580000 0x100000>;
+				read-only;
+			};
+
+			partition@6680000 {
+				label = "config2";
+				reg = <0x6680000 0x100000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan3";
+		};
+
+		wan: port@4 {
+			reg = <4>;
+			label = "wan";
+
+			nvmem-cells = <&macaddr_factory_24>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@6 {
+			reg = <6>;
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&pio {
+	spi0_flash_pins: spi0-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+
+		conf-pu {
+			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <0>; /* bias-disable */
+		};
+
+		conf-pd {
+			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <0>; /* bias-disable */
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy {
+    	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	mediatek,mtd-eeprom = <&factory 0x0>;
+
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -15,6 +15,13 @@ mercusys,mr90x-v1)
 	ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2" "link tx rx"
 	ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
 	;;
+routerich,ax3000)
+	ucidef_set_led_netdev "lan1" "lan1" "blue:lan1" "lan1" "link tx rx"
+	ucidef_set_led_netdev "lan2" "lan2" "blue:lan2" "lan2" "link tx rx"
+	ucidef_set_led_netdev "lan3" "lan3" "blue:lan3" "lan3" "link tx rx"
+	ucidef_set_led_netdev "wan"  "wan"  "blue:wan"  "wan"  "link tx rx"
+	ucidef_set_led_netdev "wan-off" "wan-off" "amber:wan" "wan" "link"
+	;;
 netgear,wax220)
 	ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
 	ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -21,7 +21,8 @@ mediatek_setup_interfaces()
 	bananapi,bpi-r3)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
 		;;
-	cudy,wr3000-v1)
+	cudy,wr3000-v1|\
+	routerich,ax3000)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
 		;;
 	glinet,gl-mt3000)

diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -63,6 +63,7 @@ case "$board" in
 	tplink,tl-xdr6088)
 		[ "$PHYNBR" = "0" ] && get_mac_label > /sys${DEVPATH}/macaddress
 		;;
+	routerich,ax3000|\
 	zyxel,ex5601-t0)
 		addr=$(mtd_get_mac_binary "Factory" 0x4)
 		[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress

diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/06_fix_usb b/target/linux/mediatek/filogic/base-files/lib/preinit/06_fix_usb
@@ -0,0 +1,12 @@
+preinit_fix_usb() {
+	case $(board_name) in
+	routerich,ax3000)
+		usb3_path="/sys/bus/usb/devices/usb2/authorized"
+		[ -e $usb3_path ] && echo 0 > $usb3_path
+		;;
+	*)
+		;;
+	esac
+}
+
+boot_hook_add preinit_main preinit_fix_usb
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
@@ -390,6 +390,22 @@ define Device/qihoo_360t7
 endef
 TARGET_DEVICES += qihoo_360t7
 
+define Device/routerich_ax3000
+  DEVICE_VENDOR := Routerich
+  DEVICE_MODEL := AX3000
+  DEVICE_DTS := mt7981b-routerich-ax3000
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 65536k
+  KERNEL_IN_UBI := 1
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
+endef
+TARGET_DEVICES += routerich_ax3000
+
 define Device/tplink_tl-xdr-common
   DEVICE_VENDOR := TP-Link
   DEVICE_DTS_DIR := ../dts