chore: Bump github.com/ethereum/go-ethereum from 1.13.14 to 1.14.0

[dependabot]

Bumps github.com/ethereum/go-ethereum from 1.13.14 to 1.14.0.

Release notes

Sourced from github.com/ethereum/go-ethereum's releases.

Asteria (v1.14.0)

Geth v1.14.0 (Asteria) is a major release with some juicy new features as well as some breaking changes. Please read through the release notes before updating to it. Whilst it should not adversely impact most users, there're always those rare occurrences.

Highlights

• Geth v1.14.0 switches over the default state trie representation from hash mode to path mode (i.e. --state.scheme flipped form hash to path) (#29108). This change does not affect Geth instances with pre-existing databases, in the case of which Geth continues to use whatever the existing database's format is. If no previous database exists however, for full nodes, Geth will now default to pathdb. The main advantage is built-in, online historical state pruning; no more runaway state growth.

  • If you want to force the old behaviour, you can run Geth with --state.scheme=hash for now. That said, we will be dropping hash mode sooner rather than later, so we advise everyone running full nodes to gradually switch, if they haven't yet.
  • Archive mode support is not yet finalised for path mode, so archive nodes will still run in hash mode. Naturally, hash mode will not be dropped until a full path archive lands and people have enough time to switch to it.

• Geth v1.14.0 introduces a brand new live-tracing feature, where one or more transaction tracers might be injected into the block processing pipeline, ensuring that tracing and execution happen in lockstep (#29189). Since Go does not have a cross platform, OS native plugin infrastructure, adding live tracers needs to be done at the Geth source code level, and Geth itself subsequently rebuilt. That said, the advantage is that such tracers have full execution flexibility to do whatever they like and however they like. Please see the live-tracer changelog and docs for details.

  • Live tracing runs in lockstep with block execution, one waiting for the other. You should never run a live tracer on a validating node, or any other where latency is important. The recommended practice is to have tracers collect and export the bare minimum data needed and do any post-processing in external systems where latency is not relevant.
  • The live tracer work required a number of breaking internal API changes. If you had your own native tracers implemented before this change, the changelog contains the necessary steps needed to update your old code for the new APIs.

• Geth v1.14.0 replaces the completely random transaction propagation paths (in the Ethereum P2P network) with pseudo-random ones, that ensure transactions from the same account follow the same path in the network (as long as no peer churn happens). The purpose is to allow a burst of transactions from the same account to ripple through the network on the same connections, minimising reordering. Whilst this doesn't provide any guarantees, nor does it replace the potential need for more complex routing logic, it should make nonce gaps significantly less likely, reducing the probability of dropped transactions during bursts (#29034).

  • This change only applies to networking, so other clients are not required to follow suit. That said, the network would behave more consistently overall if all clients implemented some similar logic (the exact routing algorithm is irrelevant, as long as it's stable in the accounts).

• Geth v1.14.0 drops support for running pre-merge networks (#29169). This does not mean that Geth will not be able to process or validate pre-merge blocks, rather that starting v1.14.0, Geth must have a consensus client drive it's chain selection. Geth drops the forward-sync mode of operation, where it imports blocks based on PoW (ethash) or PoA (clique) difficulties.

  • Non-merged networks will need to stick to Geth v1.13.x until they transition to post-merge. As Ethereum has transitioned towards a post-merge world, we cannot maintain a significant chunk of code that's been dead for 2 years now on mainnet.
  • Post-merge networks must be marked so with the terminalTotalDifficultyPassed: true field in their genesis.json. This requirement will be dropped (along with even caring at all about this field) in a few releases, but for now this field produces a clear error message for the user of what's wrong with their pre-merge network.

• Geth v1.14.0 stops automatically constructing the pending block (#28623). Performance wise there is a significant cost to creating a potential pending block, yet most node operators do not care about it. Not even validators need the pending block. This work also drops support for mining/signing a block "off-demand" (i.e. not via the engine API, rather by Geth itself), meaning Clique signing is also removed going forward.

  • With Clique mining removed, Geth v1.14.0 cannot be a Clique signer any more. This however goes hand-in-hand with the removal or pre-merge chain selection and synchronisation support described earlier.
  • The pending block can still be constructed on demand for now. Whenever an RPC method is called that is based on the pending block, Geth will generate it on the fly and cache it for 1 second for subsequent calls. The first such call will have a few hundred ms execution delay.

• Geth v1.14.0 removes support for filtering pending logs. This is following the previous change of creating the pending block only on demand. We see next to no value in monitoring the logs of a random subset of transactions that might (but probably mostly will not) end up in the next block. Power users who wish to monitor the transaction pool for MEV (or similar) purposes, should hook into Geth directly and extract the exact data they need, rather than rely on insufficient API endpoints.

• Geth v1.14.0 ships a beacon chain light client (#28822, #29308, #29335, #29532, #29567). It uses the REST API of beacon nodes and requires the beacon / light_client namespace, currently supported by Lodestar and Nimbus (specs).

  • The beacon light client provides access to consensus layer data, not execution layer data. This currently means that it can follow the beacon chain as a light client and extract the latest head and finalised execution layer block. That can be used to drive a full execution node without running an own beacon node. There is no support yet for a full execution light client.
  • Validation and staking is not possible with a beacon light client. Since the sync committee signatures on each beacon head are canonised in the next block, the beacon light client can only follow the chain with one slot delay.
  • The beacon light client exists both as a standalone executable and integrated into Geth. The blsync executable can drive any execution layer node through the standard engine API or can just do a "test run" printing block numbers and hashes to the console. The integrated mode can do the same inside Geth. If you specify at least one suitable consensus layer REST API endpoint with the --beacon.api flag, then Geth will run without a beacon node connected through the engine API.

• Geth v1.14.0 switched to using Go v1.22 by default (#28946), which means we've dropped support for Go v1.20. Geth also started using of new features from Go v1.21 in our codebase, so building with Go v1.20 will probably error from now on. Just a heads up.

Features

• Add the geth db inspect-history command to inspect pathdb state history (#29267).
• Enable the Cancun hard-fork when running Geth in dev mode (#28829).
• Use beacon chain finality as the marker to move old blocks into ancients (#28683).
• Drop large-contract (500MB+) deletion DoS protection from pathdb post Cancun (#28940).
• Switch Geth's USB library from libusb to hid for simpler hardware wallet support (#28945, #29175, #29176).
• Update the prestateTrancer to take into account 4844 blobs and their fees (#29168).
• Extend the ethclient and gethclient packages with support for 4844 blob fields (#29198).
• Detailed block execution metrics are now always reported, deprecating --metrics.expensive (#29191).
• Avoid a lot of memory allocations while shuffling 4844 blobs within Geth (#29050).
• Switch to using Go's native log/slog package instead of golang/exp (#29302).
• When computing state roots, apply state updates before deletes to avoid some trie lookups. (#29201).
• Track not only total peer count, but also how many are inbound or outbound (#29424).
• Add support for signing blob transactions (#28976, #29470).
• Surface max initcode exceeded errors from the VM to outer callers (#29354).
• Update the EVM to reject contract creation on top of non-empty storage (#28912).

... (truncated)

Commits

• 87246f3 params: release Geth v1.14.0
• 5f3c58f eth/downloader: fix case where skeleton reorgs below the filled block (#29358)
• ade7515 eth, eth/tracers: process beacon root before transactions (#29402)
• fb08fd3 core/tracing: Add OnClose Trace Hook (#29629)
• 882d1e2 cmd/geth, cmd/utils: rename config and flag to VMTraceJsonConfig (#29573)
• 9457993 core/vm: fix Prague contracts (#29612)
• 256d4b0 beacon/light: request finality update explicitly when necessary (#29567)
• b2b0e1d all: fix various typos (#29600)
• 709e0b3 metrics: remove librato (#29624)
• 0e380dd miner: fix typos (#29625)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[coderabbitai]

Important

Auto Review Skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

---

Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media?

Share

• X
• Mastodon
• Reddit
• LinkedIn

Tips

Chat

There are 3 ways to chat with CodeRabbit:

• Review comments: Directly reply to a review comment made by CodeRabbit. Example:
  • I pushed a fix in commit <commit_id>.
  • Generate unit testing code for this file.
  • Open a follow-up GitHub issue for this discussion.
• Files and specific lines of code (under the "Files changed" tab): Tag @coderabbitai in a new review comment at the desired location with your query. Examples:
  • @coderabbitai generate unit testing code for this file.
  • @coderabbitai modularize this function.
• PR comments: Tag @coderabbitai in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples:
  • @coderabbitai generate interesting stats about this repository and render them as a table.
  • @coderabbitai show all the console.log statements in this repository.
  • @coderabbitai read src/utils.ts and generate unit testing code.
  • @coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.

Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments.

CodeRabbit Commands (invoked as PR comments)

• @coderabbitai pause to pause the reviews on a PR.
• @coderabbitai resume to resume the paused reviews.
• @coderabbitai review to trigger a review. This is useful when automatic reviews are disabled for the repository.
• @coderabbitai resolve resolve all the CodeRabbit review comments.
• @coderabbitai help to get help.

Additionally, you can add @coderabbitai ignore anywhere in the PR description to prevent this PR from being reviewed.

CodeRabbit Configration File (.coderabbit.yaml)

• You can programmatically configure CodeRabbit by adding a .coderabbit.yaml file to the root of your repository.
• Please see the configuration documentation for more information.
• If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

Documentation and Community

• Visit our Documentation for detailed information on how to use CodeRabbit.
• Join our Discord Community to get help, request features, and share feedback.
• Follow us on X/Twitter for updates and announcements.