feat: update client macros

src/modules/fluidd/filesystem/home/pi/klipper_config/client_macros.cfg

@@ -1,5 +1,5 @@
-# This macro is required for Fluidd to correctly function.
-# You can copy this entries into your printer.cfg.
+# These macros are required for Fluidd to correctly function.
+# You can copy these entries into your printer.cfg.
 # 
 # Alternatively, import this file by adding
 # this line into your printer.cfg;
@@ -13,3 +13,34 @@ gcode:
   CLEAR_PAUSE
   SDCARD_RESET_FILE
   BASE_CANCEL_PRINT
+
+[gcode_macro PAUSE]
+rename_existing: BASE_PAUSE
+default_parameter_E: 1.7
+gcode:
+  {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
+  {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
+  {% set max_z = printer.toolhead.axis_maximum.z|float %}
+  {% set act_z = printer.toolhead.position.z|float %}
+  {% if act_z < (max_z - 2.0) %}
+      {% set z_safe = 2.0 %}
+  {% else %}
+      {% set z_safe = max_z - act_z %}
+  {% endif %}
+  SAVE_GCODE_STATE NAME=PAUSE_state
+  BASE_PAUSE
+  G91
+  G1 E-{E} F2100
+  G1 Z{z_safe} F900
+  G90
+  G0 X{x_park} Y{y_park} F6000
+  G91
+
+[gcode_macro RESUME]
+rename_existing: BASE_RESUME
+default_parameter_E: 1.7
+gcode:
+  G91
+  G1 E{E} F2100
+  RESTORE_GCODE_STATE NAME=PAUSE_state
+  BASE_RESUME