[GSProcessing] Add support for bucket transformations

docs/source/gs-processing/developer/input-configuration.rst

@@ -400,7 +400,27 @@ arguments.
       - ``separator`` (String, optional): Same as for ``no-op`` transformation, used to separate numerical
         values in CSV input. If the input data are in Parquet format, each value in the
         column is assumed to be an array of floats.
+-  ``bucket-numerical``
 
+   -  Transforms a numerical column with bucket normalization using a missing data imputer
+      and an optional normalizer.
+   -  ``kwargs``:
+
+      - ``imputer`` (String, optional): A method to fill in missing values in the data.
+        Valid values are:
+        ``none`` (Default), ``mean``, ``median``, and ``most_frequent``. Missing values will be replaced
+        with the respective value computed from the data.
+      - ``range`` (List[float], required), The range only defines the start and end point with ``[a, b]``. It should be
+        a list of two integers. For example, the ``[10, 30]`` should define the start point of 10 and end point
+        with 30
+      - ``bucket_cnt`` (Integer, required), The count of bucket lists used in the bucket feature transform. GSProcessing
+        calculates the size of each bucket as  ``( b - a ) / c`` , and encodes each numeric value as the number
+        of whatever bucket it falls into. Any value less than a is considered to belong in the first bucket,
+        and any value greater than b is considered to belong in the last bucket.
+      - ``slide_window_size``(Integer, optional), slide_window_size is to make numeric values fall into more than one bucket,
+        by specifying a slide-window size ``s``, where s can an integer or float, GSProcessing then transforms each
+        numeric value ``v`` of the property into a range from ``v - s/2`` through ``v + s/2`` , and assigns the value v
+        to every bucket that the range covers.
 --------------
 
 Examples

graphstorm-processing/graphstorm_processing/config/config_conversion/gconstruct_converter.py

@@ -97,7 +97,21 @@ def _convert_feature(feats: list[dict]) -> list[dict]:
 
                 if gconstruct_transform_dict["name"] == "max_min_norm":
                     gsp_transformation_dict["name"] = "numerical"
-                    gsp_transformation_dict["kwargs"] = {"normalizer": "min-max", "imputer": "mean"}
+                    gsp_transformation_dict["kwargs"] = {"normalizer": "none", "imputer": "none"}
+                elif gconstruct_transform_dict["name"] == "bucket_numerical":
+                    gsp_transformation_dict["name"] = "bucket-numerical"
+                    assert (
+                        "bucket_cnt" in gconstruct_transform_dict
+                    ), "bucket_cnt should be in the gconstruct bucket feature transform field"
+                    assert (
+                        "range" in gconstruct_transform_dict
+                    ), "range should be in the gconstruct bucket feature transform field"
+                    gsp_transformation_dict["kwargs"] = {
+                        "bucket_cnt": gconstruct_transform_dict["bucket_cnt"],
+                        "range": gconstruct_transform_dict["range"],
+                        "slide_window_size": gconstruct_transform_dict["slide_window_size"],
+                        "imputer": "none",
+                    }
                 # TODO: Add support for other common transformations here
                 else:
                     raise ValueError(

graphstorm-processing/graphstorm_processing/config/config_parser.py

@@ -21,7 +21,11 @@
 from graphstorm_processing.constants import SUPPORTED_FILE_TYPES
 from .label_config_base import LabelConfig, EdgeLabelConfig, NodeLabelConfig
 from .feature_config_base import FeatureConfig, NoopFeatureConfig
-from .numerical_configs import MultiNumericalFeatureConfig, NumericalFeatureConfig
+from .numerical_configs import (
+    MultiNumericalFeatureConfig,
+    NumericalFeatureConfig,
+    BucketFeatureConfig,
+)
 from .data_config_base import DataStorageConfig
 
 
@@ -56,6 +60,8 @@ def parse_feat_config(feature_dict: Dict) -> FeatureConfig:
         return NumericalFeatureConfig(feature_dict)
     elif transformation_name == "multi-numerical":
         return MultiNumericalFeatureConfig(feature_dict)
+    elif transformation_name == "bucket-numerical":
+        return BucketFeatureConfig(feature_dict)
     else:
         raise RuntimeError(f"Unknown transformation name: '{transformation_name}'")
 

graphstorm-processing/graphstorm_processing/config/numerical_configs.py

@@ -92,3 +92,53 @@ def __init__(self, config: Mapping):
         self.separator = self._transformation_kwargs.get("separator", None)
 
         self._sanity_check()
+
+
+class BucketFeatureConfig(FeatureConfig):
+    """Feature configuration for bucket normalization features.
+
+    Supported kwargs
+    ----------------
+    imputer: str
+        A method to fill in missing values in the data. Valid values are:
+        "none" (Default), "mean", "median", and "most_frequent". Missing values will be replaced
+        with the respective value computed from the data.
+
+    bucket_cnt: int
+        The count of bucket lists used in the bucket feature transform. Each bucket will
+        have same length.
+
+    range: List[float]
+        The range of bucket lists only defining the start and end point. The range and
+        bucket_cnt will define the buckets together. For example, range = [10, 30] and
+        bucket_cnt = 2, will have two buckets: [10, 20] and [20, 30]
+
+    slide_window_size: float or none
+        Interval or range within which numeric values are grouped into buckets. Slide window
+        size will let one value possibly fall into multiple buckets.
+    """
+
+    def __init__(self, config: Mapping):
+        super().__init__(config)
+        self.imputer = self._transformation_kwargs.get("imputer", "none")
+        self.bucket_cnt = self._transformation_kwargs.get("bucket_cnt", "none")
+        self.range = self._transformation_kwargs.get("range", "none")
+        self.slide_window_size = self._transformation_kwargs.get("slide_window_size", "none")
+        self._sanity_check()
+
+    def _sanity_check(self) -> None:
+        super()._sanity_check()
+        assert (
+            self.imputer in VALID_IMPUTERS
+        ), f"Unknown imputer requested, expected one of {VALID_IMPUTERS}, got {self.imputer}"
+        assert isinstance(
+            self.bucket_cnt, int
+        ), f"Expect bucket_cnt {self.bucket_cnt} be an integer"
+        assert (
+            isinstance(self.range, list)
+            and all(isinstance(x, (int, float)) for x in self.range)
+            and len(self.range) == 2
+        ), f"Expect range {self.range} be a list of two integers or two floats"
+        assert (
+            isinstance(self.slide_window_size, (int, float)) or self.slide_window_size == "none"
+        ), f"Expect no slide window size or expect {self.slide_window_size} is a number"

graphstorm-processing/graphstorm_processing/data_transformations/dist_feature_transformer.py

@@ -23,6 +23,7 @@
     NoopTransformation,
     DistNumericalTransformation,
     DistMultiNumericalTransformation,
+    DistBucketNumericalTransformation,
 )
 
 
@@ -48,6 +49,8 @@ def __init__(self, feature_config: FeatureConfig):
             self.transformation = DistNumericalTransformation(**default_kwargs, **args_dict)
         elif feat_type == "multi-numerical":
             self.transformation = DistMultiNumericalTransformation(**default_kwargs, **args_dict)
+        elif feat_type == "bucket-numerical":
+            self.transformation = DistBucketNumericalTransformation(**default_kwargs, **args_dict)
         else:
             raise NotImplementedError(
                 f"Feature {feat_name} has type: {feat_type} that is not supported"

graphstorm-processing/graphstorm_processing/data_transformations/dist_transformations/__init__.py

@@ -12,3 +12,4 @@
     DistMultiNumericalTransformation,
     DistNumericalTransformation,
 )
+from .dist_bucket_numerical_transformation import DistBucketNumericalTransformation

graphstorm-processing/graphstorm_processing/data_transformations/dist_transformations/dist_bucket_numerical_transformation.py

@@ -0,0 +1,117 @@
+"""
+Copyright Amazon.com, Inc. or its affiliates. All Rights Reserved.
+
+Licensed under the Apache License, Version 2.0 (the "License").
+You may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+"""
+from typing import List
+
+from pyspark.sql import DataFrame
+from pyspark.sql import functions as F
+from pyspark.sql.types import ArrayType, FloatType
+import numpy as np
+
+from .base_dist_transformation import DistributedTransformation
+from .dist_numerical_transformation import apply_imputation, apply_norm
+
+
+class DistBucketNumericalTransformation(DistributedTransformation):
+    """Transformation to apply missing value imputation and bucket normalization
+     to a numerical input.
+
+    Parameters
+    ----------
+    cols : Sequence[str]
+        The list of columns to apply the transformations on.
+    range: List[float]
+        The range of bucket lists only defining the start and end point.
+    bucket_cnt: int
+        The count of bucket lists used in the bucket feature transform.
+    slide_window_size: float or none
+        Interval or range within which numeric values are grouped into buckets.
+    imputer : str
+        The type of missing value imputation to apply to the column.
+        Valid values are "mean", "median" and "most_frequent".
+    """
+
+    # pylint: disable=redefined-builtin
+    def __init__(
+        self,
+        cols: List[str],
+        range: List[float],
+        bucket_cnt: int,
+        slide_window_size: float = 0.0,
+        imputer: str = "none",
+    ) -> None:
+        super().__init__(cols)
+        self.cols = cols
+        assert len(self.cols) == 1, "Bucket numerical transformation only supports single column"
+        self.range = range
+        self.bucket_count = bucket_cnt
+        self.slide_window_size = slide_window_size
+        # Spark uses 'mode' for the most frequent element
+        self.shared_imputation = "mode" if imputer == "most_frequent" else imputer
+
+    @staticmethod
+    def get_transformation_name() -> str:
+        return "DistBucketNumericalTransformation"
+
+    def apply(self, input_df: DataFrame) -> DataFrame:
+        imputed_df = apply_imputation(self.cols, self.shared_imputation, input_df)
+        min_val, max_val = self.range
+
+        bucket_size = (max_val - min_val) / self.bucket_count
+        epsilon = bucket_size / 10
+
+        # Implementation based on graphloader.utils.parse_numerical_multihot_feat
+        # TODO: Test if pyspark.ml.feature.Bucketizer covers our requirements and is faster
+        def determine_bucket_membership(value: float) -> List[int]:
+            # Create value range, value -> [value - slide/2, value + slide/2]
+            high_val = value + self.slide_window_size / 2
+            low_val = value - self.slide_window_size / 2
+
+            # Early exits to avoid numpy calls
+            membership_list = [0.0] * self.bucket_count
+            if value >= max_val:
+                membership_list[-1] = 1.0
+                return membership_list
+            if value <= min_val:
+                membership_list[0] = 1.0
+                return membership_list
+
+            # Upper and lower threshold the value range
+            if low_val < min_val:
+                low_val = min_val
+            elif low_val >= max_val:
+                low_val = max_val - epsilon
+            if high_val < min_val:
+                high_val = min_val
+            elif high_val >= max_val:
+                high_val = max_val - epsilon
+
+            # Determine upper and lower bucket membership
+            low_val -= min_val
+            high_val -= min_val
+            low_idx = low_val // bucket_size
+            high_idx = (high_val // bucket_size) + 1
+
+            idx = np.arange(start=low_idx, stop=high_idx, dtype=int)
+            membership_array = np.zeros(self.bucket_count, dtype=float)
+            membership_array[idx] = 1.0
+
+            return membership_array.tolist()
+
+        bucket_udf = F.udf(determine_bucket_membership, ArrayType(FloatType()))
+
+        bucketized_df = imputed_df.select(bucket_udf(F.col(self.cols[0])).alias(self.cols[0]))
+
+        return bucketized_df

graphstorm-processing/graphstorm_processing/graph_loaders/schema_utils.py

@@ -94,7 +94,7 @@ def determine_spark_feature_type(feature_type: str) -> Type[DataType]:
     # TODO: Replace with pattern matching after moving to Python 3.10?
     if feature_type in ["no-op", "multi-numerical"] or feature_type.startswith("text"):
         return StringType
-    if feature_type in ["numerical", "none"]:
+    if feature_type in ["numerical", "bucket-numerical", "none"]:
         return FloatType
     else:
         raise NotImplementedError(f"Unknown feature type: {feature_type}")

graphstorm-processing/tests/test_converter.py

@@ -208,6 +208,15 @@ def test_convert_gsprocessing(converter: GConstructConfigConverter):
             "features": [
                 {"feature_col": ["citation_time"], "feature_name": "feat"},
                 {"feature_col": ["num_citations"], "transform": {"name": "max_min_norm"}},
+                {
+                    "feature_col": ["num_citations"],
+                    "transform": {
+                        "name": "bucket_numerical",
+                        "bucket_cnt": 9,
+                        "range": [10, 100],
+                        "slide_window_size": 5,
+                    },
+                },
             ],
             "labels": [
                 {"label_col": "label", "task_type": "classification", "split_pct": [0.8, 0.1, 0.1]}
@@ -249,7 +258,19 @@ def test_convert_gsprocessing(converter: GConstructConfigConverter):
             "column": "num_citations",
             "transformation": {
                 "name": "numerical",
-                "kwargs": {"normalizer": "min-max", "imputer": "mean"},
+                "kwargs": {"normalizer": "none", "imputer": "none"},
+            },
+        },
+        {
+            "column": "num_citations",
+            "transformation": {
+                "name": "bucket-numerical",
+                "kwargs": {
+                    "bucket_cnt": 9,
+                    "range": [10, 100],
+                    "slide_window_size": 5,
+                    "imputer": "none",
+                },
             },
         },
     ]