-
Notifications
You must be signed in to change notification settings - Fork 131
LED Preferences
The sound reactive fork of WLED support multiple layouts of a 2D matrix led panel. In addition it support multiple 2D matrix led panels.
A matrix is made of 1 or more identical physical led panels connected together. Width and Height is the sum of leds in all the panels in both directions.
Animations are written so that the first LED in the matrix is in the top left corner. If your matrix is oriented in a different fashion, you can use the 2D Panel layout settings to adjust that.
Setting name | Value Range | Description |
---|---|---|
Serpentine | Y/N | Select if your layout is serpentine. Otherwise, it's not. (dev version) |
Transpose | Y/N | Swap the major and the minor axes (otherwise no swap). Don't use on non-square. (dev version) |
Note: If multiple panels are used, they must be identical.
Setting name | Value Range | Description |
---|---|---|
Multiple panels | Y/N | Check if more than 1 panel, e.g. 4 8x32 or 16x16 panels. Multiple panels are connected together starting top left and ending bottom right (dev version) |
Horizontal / Vertical panels | 1..x | Number of panels on horizontal and vertical axis. Total panels is horizontal x vertical. Total Width and Height of connected panels should match Matrix Width and Height (dev version) |
Note 1: The number of LED's should contain ALL the number of ALL LED's in the display. Note 2: The 2D matrix value should contain values for number of pixels in all your connected panels.
I have 6 - 8x32 panels. They are connected sequentially with 32 led's wide and 8 led's high as follows:
0 1 2
3 4 5
Introduction
Installing and Compiling
First Time Setup
Running Sound Reactive WLED
2D Support
Sound Settings
2D LED Preferences
ARTI-FX
UDP Sound Sync
Sound Reactive Animations
Non-Reactive Animations
Digital Microphone Hookup
Analog Audio Input Options
Using my PC for the Sound
News
It's Not Working
Noise and Spikes
Connectivity Issues
WLED Programming Notes
Modifying Sound Reactive WLED
Future Directions
Adding a new Settings Page
On Lossy Colours
Sliders in WLED
Testing