feat(docs): Add procedure for surveillance installation (#87)

from SharePoint

src/dacs-sw/surveillance-installation/sections/installation.tex

@@ -8,6 +8,72 @@
   ID & CK 1 & CK 2 & CK 3 & Description \\ \hline
 
   \procedureItem{
-    REPLACE ME
+    Check that the surveillance cameras are positioned on the trailer:
+    \begin{itemize}
+      \item 2 cameras on the FSS side
+      \item 2 cameras on the OSS side
+      \item 2 cameras on the shielding wall, on the engine side
+    \end{itemize}
+    For range surveillance, 1 camera will be mounted on the earth wall.
+  }
+
+  \procedureItem{
+    Check inside the junction box on the OSS tower, that every power camera is properly connected
+  }
+
+  \procedureItem{
+    Make sure the Modem is connected via cable to the lan network of the trailer
+  }
+
+  \procedureItem{
+    Connect ethernet cable from surveillance.
+  }
+
+  \procedureItem{
+    After Mission Control Station is installed as in start surveillance website via the shortcut in the bottom task bar
+  }
+
+  \procedureItem{
+    Login via the button (no password needed, username = admin)
+  }
+
+  \procedureItem{
+    \sout{
+      Go to settings --> Video settings
+    }
+  }
+
+  \procedureItem{
+    \sout{
+      Mark all “Timing” Boxes red of the weekday the test is taking place.
+      This will lead to the surveillance system recording said timeframe.
+    }
+  }
+
+  \procedureItem{
+    \sout{
+      On the bottom select “Select all” and press save.
+      All Cameras should be saved continuously now.
+      Recordings will be saved on the surveillance box and have to be downloaded after each firing day by connecting a screen to the surveillance box
+    }
+  }
+
+  \procedureItem{
+    Check that cameras see all points of interest (valves, displays, etc.)
+  }
+
+
+  \procedureItem{
+    To record the video Press Windows-G and then Record
+  }
+
+
+  \procedureItem{
+    Turn off the DACS box after the test day is over
+  }
+
+
+  \procedureItem{
+    Disconnect monitor and modem and prepare the modem for its installation on the trailer
   }
 \end{tabularx}

src/dacs-sw/surveillance-installation/sections/notes.tex

@@ -5,6 +5,6 @@
   \hline
 
   \noteItem{
-    \textbf{REPLACE ME}
+    \textit{None}
   }
 \end{tabularx}

src/dacs-sw/surveillance-installation/sections/operation-description.tex

@@ -1,2 +1,2 @@
 % Operation description
-\textbf{REPLACE ME}
+To ensure the functionality of the monitoring system

src/dacs-sw/surveillance-installation/sections/required-tools-materials.tex

@@ -4,5 +4,16 @@
   \hline
   \rowcolor{tableHeaderColor}
   Check & Amount & Description \\ \hline
-  \checklistItem{X}{Replace Me}
+  \checklistItem{1}{Monitor Display + HDMI cable}
+  \checklistItem{1}{Smartphone/Tablet with IP Pro app installed}
+  \checklistItem{1}{Separate smartphone for hotspot Connection}
+  \checklistItem{1}{Modem Camera Surveillance + 12VDC power supply + mouse}
+  \checklistItem{$>$1}{Cable ties/Strong Duct Tape to install the long range surveillance camera on the hill}
+  \checklistItem{}{
+    Camera Modem
+  \\
+    Camera Modem Power Supply
+  \\
+    Camera Modem Mouse
+  }
 \end{tabularx}