feat(docs): Update procedure in regards to trailer connection (#81)

Add steps to confirm trailer connection and what to do in case of issues

src/dacs-sw/control-station-installation/sections/installation.tex

@@ -62,8 +62,8 @@
 
   \procedureItem{
     Connect the 100m ethernet cable to the ethernet switch in DACS Box and to the mission control PC.
-  \\
-    (Check that in the upper right corner when you click on the WLAN symbol it says 'Wired connected')
+    % \\
+    %   (Check that in the upper right corner when you click on the WLAN symbol it says 'Wired connected')
   }
 
   \procedureItem{
@@ -74,6 +74,20 @@
     Grab newest config file from sharepoint
   }
 
+  \procedureItem{
+    Ask TC to confirm that it's ok to connect the power cable for the trailer.
+  \\
+    Once confirmed, connect it.
+  }
+
+  \procedureItem{
+    Check that there's a connection to the trailer.
+  \\
+    The LED on the switch should light up.
+  \\
+    If it does not, check the cables at every connector.
+  }
+
   \procedureItem{
     Launch system by running in terminal:
   \\
@@ -152,4 +166,16 @@
       \item set buffer in upper left corner to 600 to set the window size to 10 minutes
     \end{itemize}
   }
+
+  \procedureItem{
+    Confirm that you get valid data read outs from the trailer.
+  }
+
+  \procedureItem{
+    Confirm that you get a live camera feed.
+  }
+
+  \procedureItem{
+    Good luck on your firing $<$3
+  }
 \end{tabularx}