Add ERM actuator support in QCOM spmi-haptics driver and enable it fo…

…r pmi8950
archeYR · Nov 22, 2023 · c7a641e · c7a641e
1 parent 39e2ba2
commit c7a641e
Show file tree

Hide file tree

Showing 3 changed files with 47 additions and 14 deletions.
diff --git a/arch/arm64/boot/dts/qcom/msm8937-lenovo-l38011.dts b/arch/arm64/boot/dts/qcom/msm8937-lenovo-l38011.dts
@@ -138,6 +138,10 @@
 	};
 };
 
+&pmi8950_haptics {
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm8937-regulators";

diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2019, AngeloGioacchino Del Regno <[email protected]>
 
+#include <dt-bindings/input/qcom,spmi-haptics.h>
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
@@ -108,5 +109,23 @@
 
 			status = "disabled";
 		};
+
+		pmi8950_haptics: haptics@c000 {
+			compatible = "qcom,pmi8941-haptics", "qcom,spmi-haptics";
+			reg = <0xc000>;
+
+			interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "short", "play";
+
+			qcom,actuator-type = <HAP_TYPE_ERM>;
+			qcom,wave-shape = <HAP_WAVE_SQUARE>;
+
+			/* Downstream defines direct play mode */
+			qcom,play-mode = <HAP_PLAY_BUFFER>;
+			qcom,brake-pattern = <0x3 0x3 0x0 0x0>;
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/drivers/input/misc/qcom-spmi-haptics.c b/drivers/input/misc/qcom-spmi-haptics.c
@@ -528,19 +528,29 @@ static int spmi_haptics_init(struct spmi_haptics *haptics)
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Configure auto resonance
-	 * see spmi_haptics_lra_auto_res_config downstream
-	 * This is greatly simplified.
-	 */
-	val = FIELD_PREP(LRA_RES_CAL_MASK, ilog2(32 / HAP_RES_CAL_PERIOD_MIN)) |
-	      FIELD_PREP(LRA_AUTO_RES_MODE_MASK, HAP_AUTO_RES_ZXD_EOP) |
-	      FIELD_PREP(LRA_HIGH_Z_MASK, 1);
-
-	mask = LRA_AUTO_RES_MODE_MASK | LRA_HIGH_Z_MASK | LRA_RES_CAL_MASK;
-
-	ret = spmi_haptics_write_masked(haptics, haptics->base + HAP_LRA_AUTO_RES_REG,
-			mask, val);
+	if (haptics->actuator_type == HAP_TYPE_LRA)
+	{
+		/*
+		* Configure auto resonance
+		* see spmi_haptics_lra_auto_res_config downstream
+		* This is greatly simplified.
+		*/
+		val = FIELD_PREP(LRA_RES_CAL_MASK, ilog2(32 / HAP_RES_CAL_PERIOD_MIN)) |
+				FIELD_PREP(LRA_AUTO_RES_MODE_MASK, HAP_AUTO_RES_ZXD_EOP) |
+            FIELD_PREP(LRA_HIGH_Z_MASK, 1);
+
+		mask = LRA_AUTO_RES_MODE_MASK | LRA_HIGH_Z_MASK | LRA_RES_CAL_MASK;
+
+		ret = spmi_haptics_write_masked(haptics, haptics->base + HAP_LRA_AUTO_RES_REG,
+				mask, val);
+	}
+	else
+	{
+        /* Disable auto resonance */
+        val = HAP_AUTO_RES_NONE;
+        ret = spmi_haptics_write(haptics, haptics->base + HAP_LRA_AUTO_RES_REG,
+				&val, 1);
+	}
 
 	/* Configure the PLAY MODE register */
 	ret = spmi_haptics_write_play_mode(haptics);
@@ -817,7 +827,7 @@ static int spmi_haptics_probe(struct platform_device *pdev)
 	haptics->actuator_type = HAP_TYPE_LRA;
 	ret = of_property_read_u32(node, "qcom,actuator-type", &val);
 	if (!ret) {
-		if (val != HAP_TYPE_LRA) {
+		if (val != HAP_TYPE_LRA && val != HAP_TYPE_ERM) {
 			dev_err(&pdev->dev, "qcom,actuator-type (%d) isn't supported\n", val);
 			ret = -EINVAL;
 			goto register_fail;