FIX: imprint project occurrences (#493)

Co-authored-by: Roberto Pastor Muela <[email protected]>

src/ansys/geometry/core/designer/body.py

@@ -585,42 +585,13 @@ def add_midsurface_offset(self, offset: MidSurfaceOffsetType) -> None:
     @protect_grpc
     @check_input_types
     def imprint_curves(self, faces: List[Face], sketch: Sketch) -> Tuple[List[Edge], List[Face]]:
-        # Verify that each of the faces provided are part of this body
-        body_faces = self.faces
-        for provided_face in faces:
-            is_found = False
-            for body_face in body_faces:
-                if provided_face.id == body_face.id:
-                    is_found = True
-                    break
-            if not is_found:
-                raise ValueError(f"Face with id {provided_face.id} is not part of this body.")
-
-        self._grpc_client.log.debug(
-            f"Imprinting curves provided on {self.id} "
-            + f"for faces {[face.id for face in faces]}."
-        )
-
-        imprint_response = self._commands_stub.ImprintCurves(
-            ImprintCurvesRequest(
-                body=self._id,
-                curves=sketch_shapes_to_grpc_geometries(sketch._plane, sketch.edges, sketch.faces),
-                faces=[face._id for face in faces],
-            )
+        raise NotImplementedError(
+            """
+            imprint_curves is not implemented at the TemplateBody level.
+            Instead, call this method on a Body.
+        """
         )
 
-        new_edges = [
-            Edge(grpc_edge.id, grpc_edge.curve_type, self, self._grpc_client)
-            for grpc_edge in imprint_response.edges
-        ]
-
-        new_faces = [
-            Face(grpc_face.id, grpc_face.surface_type, self, self._grpc_client)
-            for grpc_face in imprint_response.faces
-        ]
-
-        return (new_edges, new_faces)
-
     @protect_grpc
     @check_input_types
     def project_curves(
@@ -630,28 +601,13 @@ def project_curves(
         closest_face: bool,
         only_one_curve: Optional[bool] = False,
     ) -> List[Face]:
-        curves = sketch_shapes_to_grpc_geometries(
-            sketch._plane, sketch.edges, sketch.faces, only_one_curve=only_one_curve
-        )
-
-        self._grpc_client.log.debug(f"Projecting provided curves on {self.id}.")
-
-        project_response = self._commands_stub.ProjectCurves(
-            ProjectCurvesRequest(
-                body=self._id,
-                curves=curves,
-                direction=unit_vector_to_grpc_direction(direction),
-                closest_face=closest_face,
-            )
+        raise NotImplementedError(
+            """
+            project_curves is not implemented at the TemplateBody level.
+            Instead, call this method on a Body.
+        """
         )
 
-        projected_faces = [
-            Face(grpc_face.id, grpc_face.surface_type, self, self._grpc_client)
-            for grpc_face in project_response.faces
-        ]
-
-        return projected_faces
-
     @protect_grpc
     @check_input_types
     @reset_tessellation_cache
@@ -902,7 +858,41 @@ def add_midsurface_offset(self, offset: "MidSurfaceOffsetType") -> None:
         self._template.add_midsurface_offset(offset)
 
     def imprint_curves(self, faces: List[Face], sketch: Sketch) -> Tuple[List[Edge], List[Face]]:
-        return self._template.imprint_curves(faces, sketch)
+        # Verify that each of the faces provided are part of this body
+        body_faces = self.faces
+        for provided_face in faces:
+            is_found = False
+            for body_face in body_faces:
+                if provided_face.id == body_face.id:
+                    is_found = True
+                    break
+            if not is_found:
+                raise ValueError(f"Face with id {provided_face.id} is not part of this body.")
+
+        self._template._grpc_client.log.debug(
+            f"Imprinting curves provided on {self.id} "
+            + f"for faces {[face.id for face in faces]}."
+        )
+
+        imprint_response = self._template._commands_stub.ImprintCurves(
+            ImprintCurvesRequest(
+                body=self._id,
+                curves=sketch_shapes_to_grpc_geometries(sketch._plane, sketch.edges, sketch.faces),
+                faces=[face._id for face in faces],
+            )
+        )
+
+        new_edges = [
+            Edge(grpc_edge.id, grpc_edge.curve_type, self, self._template._grpc_client)
+            for grpc_edge in imprint_response.edges
+        ]
+
+        new_faces = [
+            Face(grpc_face.id, grpc_face.surface_type, self, self._template._grpc_client)
+            for grpc_face in imprint_response.faces
+        ]
+
+        return (new_edges, new_faces)
 
     def project_curves(
         self,
@@ -911,7 +901,26 @@ def project_curves(
         closest_face: bool,
         only_one_curve: Optional[bool] = False,
     ) -> List[Face]:
-        return self._template.project_curves(direction, sketch, closest_face, only_one_curve)
+        curves = sketch_shapes_to_grpc_geometries(
+            sketch._plane, sketch.edges, sketch.faces, only_one_curve=only_one_curve
+        )
+        self._template._grpc_client.log.debug(f"Projecting provided curves on {self.id}.")
+
+        project_response = self._template._commands_stub.ProjectCurves(
+            ProjectCurvesRequest(
+                body=self._id,
+                curves=curves,
+                direction=unit_vector_to_grpc_direction(direction),
+                closest_face=closest_face,
+            )
+        )
+
+        projected_faces = [
+            Face(grpc_face.id, grpc_face.surface_type, self, self._template._grpc_client)
+            for grpc_face in project_response.faces
+        ]
+
+        return projected_faces
 
     def translate(self, direction: UnitVector3D, distance: Union[Quantity, Distance, Real]) -> None:
         return self._template.translate(direction, distance)

tests/integration/test_design.py

@@ -836,6 +836,7 @@ def test_project_and_imprint_curves(modeler: Modeler, skip_not_on_linux_service)
     """Test the projection of a set of curves on a body."""
     # Create your design on the server side
     design = modeler.create_design("ExtrudeSlot")
+    comp = design.add_component("Comp1")
 
     # Create a Sketch object and draw a couple of slots
     imprint_sketch = Sketch()
@@ -845,7 +846,7 @@ def test_project_and_imprint_curves(modeler: Modeler, skip_not_on_linux_service)
     # Extrude the sketch
     sketch = Sketch()
     sketch.box(Point2D([0, 0], UNITS.mm), Quantity(150, UNITS.mm), Quantity(150, UNITS.mm))
-    body = design.extrude_sketch(name="MyBox", sketch=sketch, distance=Quantity(50, UNITS.mm))
+    body = comp.extrude_sketch(name="MyBox", sketch=sketch, distance=Quantity(50, UNITS.mm))
     body_faces = body.faces
 
     # Project the curves on the box
@@ -888,6 +889,10 @@ def test_project_and_imprint_curves(modeler: Modeler, skip_not_on_linux_service)
     assert len(new_faces) == 2
     assert len(body.faces) == 8
 
+    # Make sure we have occurrence faces, not master
+    assert faces[0].id not in [face.id for face in body._template.faces]
+    assert new_faces[0].id not in [face.id for face in body._template.faces]
+
 
 def test_copy_body(modeler: Modeler, skip_not_on_linux_service):
     """Test copying a body."""