This is my first repository so forgive me if I'm doing it wrong. It uses the following Home Assistant integration.
https://github.com/dalinicus/homeassistant-acinfinity
I wish I had the skills to make an actual card that incorporates the integration where you could just add it but unfortunately I don't so the best I can do is provide users with the code and custom cards I used to create it.
I basically made five folders with the code I used for my Home Assistant card. I use the card two different ways, as a popup card and as a regular card. The reason I have the popup uis because I originally had a dashboard view with a lot of other information on it so I setup the AC Infinity card to operate as a popup. I still have that dashboard view but I also now have a dashboard view with both my AC Infinity controllers in a side-by-side view for comparision. I change things as I need them or as I feel I don't need them which is why you might see something repetitive like the control for the max or on level of a device. I have both a bar slider and a number box because I'm trying out both to see which one I like more. I also display the Current Power because on the AC Infinity mobile app I under port settings I use TRANS for dynamic response, opposed to BUFF, so the devices power slowly increases based on the trigger that was set. One of the things I think I still need to fix is the Max and Min numbers for the sliders as a fail safe so I don't accidentally set a paramter to some extreme number. Another thing I recently added was the remaining time entity which shows the amount of time left in Scheduled Mode and some of the others. I noticed that when it comes to time it could be off based on your computer. It's just something to keep in mind if you ever see an offset when using the timer helper or anything similar. I resynced my computer time when I noticed that and everything was back working.
The reason I use the decluttering card is because I have more than one AC Infinity controller and also because of the multiple ports on the AC Infinity controller. The decluttering card helps with both. So if I purchased another controller or the controller that has the 8 ports I could just change the amount of tabs and then send a specific variable to the declutterring card. You'll notice I use the same naming convention for my device tent_001_port_001 or tent_002_port_002. I did not use the type of device connected because I often changed them and it was easier to use a general term for each and just remember which each one was. That could easily be changed though by changing the name of each tab of the custom tab card.
The button templates were also used to cutdown on the amount of code. If one vriable needs to be changed I change it in the code after I call the template because it overides the template. The default button template is a template I use throughout my entire dashboard for all my views. It works with the dark theme that I'm using. You might need to adjust that to fit your dashboard theme. This is also true with my use of several different type of stack cards. The different cards produced different results for me when it came to the border or background so I used the cards that worked for me for that particular secion.
The template sensors are in my configuration yaml. I actually have use the template: !include templates.yaml function in my main config file to point to a templates.yaml file that has all of the templates I use for my entire dashboard. That is why they begin with sensor and not template. The templates were needed to properly help display whether devices were ON or OFF or whether they were PLUGGED IN or UNPLUGGED. I use them with the Conditional card so that if something is not plugged in I receive a message that says the device is Unplugged.
Custom Button Card: https://github.com/custom-cards/button-card
Custom Stack In Card: https://github.com/custom-cards/stack-in-card
Custom Declutter Card: https://github.com/custom-cards/decluttering-card
Custom Flex Horseshoe Card: https://github.com/AmoebeLabs/flex-horseshoe-card
Custom Mod Card: https://github.com/thomasloven/lovelace-card-mod
Custom Vertical Stack In Card: https://github.com/ofekashery/vertical-stack-in-card
Custom Browser Mod Card: https://github.com/thomasloven/hass-browser_mod
Custom Gap Card: https://github.com/thomasloven/lovelace-gap-card
Custom Slider Button Card: https://github.com/mattieha/slider-button-card
Custom Tabbed Card: https://github.com/kinghat/tabbed-card
Custom Number Box Card: https://github.com/junkfix/numberbox-card
