For more information and updates: http://alexforencich.com/wiki/en/verilog/ethernet/start
GitHub repository: https://github.com/alexforencich/verilog-ethernet
Collection of Ethernet-related components for gigabit, 10G, and 25G packet processing (8 bit and 64 bit datapaths). Includes modules for handling Ethernet frames as well as IP, UDP, and ARP and the components for constructing a complete UDP/IP stack. Includes MAC modules for gigabit and 10G/25G, a 10G/25G PCS/PMA PHY module, and a 10G/25G combination MAC/PCS/PMA module. Includes various PTP related components for implementing systems that require precise time synchronization. Also includes full MyHDL testbench with intelligent bus cosimulation endpoints.
For IP and ARP support only, use ip_complete (1G) or ip_complete_64 (10G/25G).
For UDP, IP, and ARP support, use udp_complete (1G) or udp_complete_64 (10G/25G).
Top level gigabit and 10G/25G MAC modules are eth_mac_*, with various interfaces and with/without FIFOs. Top level 10G/25G PCS/PMA PHY module is eth_phy_10g. Top level 10G/25G MAC/PCS/PMA combination module is eth_mac_phy_10g.
PTP components include a configurable PTP clock (ptp_clock), a PTP clock CDC module (ptp_clock_cdc) for transferring PTP time across clock domains, and a configurable PTP period output module for precisely generating arbitrary frequencies from PTP time.
ARP handling logic with parametrizable retry timeout parameters and parametrizable datapath.
Basic hash-based cache for ARP entries. Parametrizable depth.
ARP frame receiver with parametrizable datapath.
ARP frame transmitter with parametrizable datapath.
Ethernet frame check sequence calculator.
Ethernet frame check sequence calculator with 64 bit datapath for 10G/25G Ethernet.
Ethernet frame check sequence checker.
Ethernet frame check sequence inserter.
AXI stream GMII/MII frame receiver with clock enable and MII select.
AXI stream GMII/MII frame transmitter with clock enable and MII select.
AXI stream XGMII frame receiver with 32 bit datapath.
AXI stream XGMII frame receiver with 64 bit datapath.
AXI stream XGMII frame transmitter with 32 bit datapath.
AXI stream XGMII frame transmitter with 64 bit datapath.
Ethernet frame arbitrated muliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.
Ethernet frame receiver with parametrizable datapath.
Ethernet frame transmitter with parametrizable datapath.
Ethernet frame demuliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.
Gigabit Ethernet MAC with GMII interface.
Gigabit Ethernet MAC with GMII interface and FIFOs.
Tri-mode Ethernet MAC with GMII/MII interface and automatic PHY rate adaptation logic.
Tri-mode Ethernet MAC with GMII/MII interface, FIFOs, and automatic PHY rate adaptation logic.
Tri-mode Ethernet MAC with RGMII interface and automatic PHY rate adaptation logic.
Tri-mode Ethernet MAC with RGMII interface, FIFOs, and automatic PHY rate adaptation logic.
10G/25G Ethernet MAC with XGMII interface. Datapath selectable between 32 and 64 bits.
10G/25G Ethernet MAC with XGMII interface and FIFOs. Datapath selectable between 32 and 64 bits.
Ethernet MAC with MII interface.
Ethernet MAC with MII interface and FIFOs.
10G/25G Ethernet MAC/PHY combination module with SERDES interface.
10G/25G Ethernet MAC/PHY combination module with SERDES interface and FIFOs.
10G/25G Ethernet MAC/PHY combination module with SERDES interface, RX path.
10G/25G Ethernet MAC/PHY combination module with SERDES interface, TX path.
Ethernet frame muliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.
10G/25G Ethernet PCS/PMA PHY.
10G/25G Ethernet PCS/PMA PHY receive-side logic.
10G/25G Ethernet PCS/PMA PHY BER monitor.
10G/25G Ethernet PCS/PMA PHY frame synchronizer.
10G/25G Ethernet PCS/PMA PHY transmit-side logic.
GMII/MII PHY interface and clocking logic.
IPv4 block with 8 bit data width for gigabit Ethernet. Manages IPv4 packet transmssion and reception. Interfaces with ARP module for MAC address lookup.
IPv4 block with 64 bit data width for 10G/25G Ethernet. Manages IPv4 packet transmssion and reception. Interfaces with ARP module for MAC address lookup.
IP frame arbitrated muliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.
IPv4 module with ARP integration.
Top level for gigabit IP stack.
IPv4 module with ARP integration and 64 bit data width for 10G/25G Ethernet.
Top level for 10G/25G IP stack.
IP frame demuliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.
IP frame receiver.
IP frame receiver with 64 bit datapath for 10G/25G Ethernet.
IP frame transmitter.
IP frame transmitter with 64 bit datapath for 10G/25G Ethernet.
IP frame muliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.
Fully parametrizable combinatorial parallel LFSR/CRC module.
MII PHY interface and clocking logic.
PTP clock module with PPS output. Generates both 64 bit and 96 bit timestamp formats. Fine frequeny adjustment supported with configurable fractional nanoseconds field.
PTP clock CDC module with PPS output. Use this module to transfer and deskew a free-running PTP clock across clock domains. Supports both 64 and 96 bit timestamp formats.
PTP timestamp extract module. Use this module to extract a PTP timestamp embedded in the tuser sideband signal of an AXI stream interface.
PTP period output module. Generates a pulse output, configurable in absolute start time, period, and width, based on PTP time from a PTP clock.
RGMII PHY interface and clocking logic.
UDP block with 8 bit data width for gigabit Ethernet. Manages UDP packet transmssion and reception.
UDP block with 64 bit data width for 10G/25G Ethernet. Manages UDP packet transmssion and reception.
UDP frame arbitrated muliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.
UDP checksum generator module. Calculates UDP length, IP length, and UDP checksum fields.
UDP checksum generator module with 64 bit datapath. Calculates UDP length, IP length, and UDP checksum fields.
UDP module with IPv4 and ARP integration.
Top level for gigabit UDP stack.
UDP module with IPv4 and ARP integration and 64 bit data width for 10G Ethernet.
Top level for 10G/25G UDP stack.
UDP frame demuliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.
UDP frame receiver.
UDP frame receiver with 64 bit datapath for 10G/25G Ethernet.
UDP frame transmitter.
UDP frame transmitter with 64 bit datapath for 10G/25G Ethernet.
UDP frame muliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.
XGMII 10GBASE-R decoder for 10G PCS/PMA PHY.
XGMII 10GBASE-R encoder for 10G PCS/PMA PHY.
XGMII de-interleaver for interfacing with PHY cores that interleave the control and data lines.
XGMII interleaver for interfacing with PHY cores that interleave the control and data lines.
tdata : Data (width generally DATA_WIDTH)
tkeep : Data word valid (width generally KEEP_WIDTH, present on _64 modules)
tvalid : Data valid
tready : Sink ready
tlast : End-of-frame
tuser : Bad frame (valid with tlast & tvalid)
rtl/arp.v : ARP handling logic
rtl/arp_cache.v : ARP LRU cache
rtl/arp_eth_rx.v : ARP frame receiver
rtl/arp_eth_tx.v : ARP frame transmitter
rtl/eth_arb_mux.py : Ethernet frame arbitrated multiplexer generator
rtl/axis_eth_fcs.v : Ethernet FCS calculator
rtl/axis_eth_fcs_64.v : Ethernet FCS calculator (64 bit)
rtl/axis_eth_fcs_insert.v : Ethernet FCS inserter
rtl/axis_eth_fcs_check.v : Ethernet FCS checker
rtl/axis_gmii_rx.v : AXI stream GMII/MII receiver
rtl/axis_gmii_tx.v : AXI stream GMII/MII transmitter
rtl/axis_xgmii_rx_32.v : AXI stream XGMII receiver (32 bit)
rtl/axis_xgmii_rx_64.v : AXI stream XGMII receiver (64 bit)
rtl/axis_xgmii_tx_32.v : AXI stream XGMII transmitter (32 bit)
rtl/axis_xgmii_tx_64.v : AXI stream XGMII transmitter (64 bit)
rtl/eth_arb_mux.v : Ethernet frame arbitrated multiplexer
rtl/eth_axis_rx.v : Ethernet frame receiver
rtl/eth_axis_tx.v : Ethernet frame transmitter
rtl/eth_demux.v : Ethernet frame demultiplexer
rtl/eth_mac_1g.v : Gigabit Ethernet GMII MAC
rtl/eth_mac_1g_fifo.v : Gigabit Ethernet GMII MAC with FIFO
rtl/eth_mac_1g_gmii.v : Tri-mode Ethernet GMII/MII MAC
rtl/eth_mac_1g_gmii_fifo.v : Tri-mode Ethernet GMII/MII MAC with FIFO
rtl/eth_mac_1g_rgmii.v : Tri-mode Ethernet RGMII MAC
rtl/eth_mac_1g_rgmii_fifo.v : Tri-mode Ethernet RGMII MAC with FIFO
rtl/eth_mac_10g.v : 10G/25G Ethernet XGMII MAC
rtl/eth_mac_10g_fifo.v : 10G/25G Ethernet XGMII MAC with FIFO
rtl/eth_mac_mii.v : Ethernet MII MAC
rtl/eth_mac_mii_fifo.v : Ethernet MII MAC with FIFO
rtl/eth_mac_phy_10g.v : 10G/25G Ethernet XGMII MAC/PHY
rtl/eth_mac_phy_10g_fifo.v : 10G/25G Ethernet XGMII MAC/PHY with FIFO
rtl/eth_mac_phy_10g_rx.v : 10G/25G Ethernet XGMII MAC/PHY RX with FIFO
rtl/eth_mac_phy_10g_tx.v : 10G/25G Ethernet XGMII MAC/PHY TX with FIFO
rtl/eth_mux.v : Ethernet frame multiplexer
rtl/gmii_phy_if.v : GMII PHY interface
rtl/iddr.v : Generic DDR input register
rtl/ip.v : IPv4 block
rtl/ip_64.v : IPv4 block (64 bit)
rtl/ip_arb_mux.v : IP frame arbitrated multiplexer
rtl/ip_complete.v : IPv4 stack (IP-ARP integration)
rtl/ip_complete_64.v : IPv4 stack (IP-ARP integration) (64 bit)
rtl/ip_demux.v : IP frame demultiplexer
rtl/ip_eth_rx.v : IPv4 frame receiver
rtl/ip_eth_rx_64.v : IPv4 frame receiver (64 bit)
rtl/ip_eth_tx.v : IPv4 frame transmitter
rtl/ip_eth_tx_64.v : IPv4 frame transmitter (64 bit)
rtl/ip_mux.v : IP frame multiplexer
rtl/lfsr.v : Generic LFSR/CRC module
rtl/mii_phy_if.v : MII PHY interface
rtl/oddr.v : Generic DDR output register
rtl/ptp_clock.v : PTP clock
rtl/ptp_clock_cdc.v : PTP clock CDC
rtl/ptp_ts_extract.v : PTP timestamp extract
rtl/ptp_perout.v : PTP period out
rtl/rgmii_phy_if.v : RGMII PHY interface
rtl/ssio_ddr_in.v : Generic source synchronous IO DDR input module
rtl/ssio_ddr_in_diff.v : Generic source synchronous IO DDR differential input module
rtl/ssio_ddr_out.v : Generic source synchronous IO DDR output module
rtl/ssio_ddr_out_diff.v : Generic source synchronous IO DDR differential output module
rtl/ssio_sdr_in.v : Generic source synchronous IO SDR input module
rtl/ssio_sdr_in_diff.v : Generic source synchronous IO SDR differential input module
rtl/ssio_sdr_out.v : Generic source synchronous IO SDR output module
rtl/ssio_sdr_out_diff.v : Generic source synchronous IO SDR differential output module
rtl/udp.v : UDP block
rtl/udp_64.v : UDP block (64 bit)
rtl/udp_arb_mux.v : UDP frame arbitrated multiplexer
rtl/udp_checksum_gen.v : UDP checksum generator
rtl/udp_checksum_gen_64.v : UDP checksum generator (64 bit)
rtl/udp_complete.v : UDP stack (IP-ARP-UDP)
rtl/udp_complete_64.v : UDP stack (IP-ARP-UDP) (64 bit)
rtl/udp_demux.v : UDP frame demultiplexer
rtl/udp_ip_rx.v : UDP frame receiver
rtl/udp_ip_rx_64.v : UDP frame receiver (64 bit)
rtl/udp_ip_tx.v : UDP frame transmitter
rtl/udp_ip_tx_64.v : UDP frame transmitter (64 bit)
rtl/udp_mux.v : UDP frame multiplexer
rtl/xgmii_baser_dec_64.v : XGMII 10GBASE-R decoder
rtl/xgmii_baser_enc_64.v : XGMII 10GBASE-R encoder
rtl/xgmii_deinterleave.v : XGMII data/control de-interleaver
rtl/xgmii_interleave.v : XGMII data/control interleaver
transfer with header data
__ __ __ __ __ __ __
clk __/ \__/ \__/ \__/ \__/ \__/ \__/ \__
______________ ___________
hdr_ready \_________________/
_____
hdr_valid ________/ \_____________________________
_____
hdr_data XXXXXXXXX_HDR_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
___________ _____ _____
tdata XXXXXXXXX_A0________X_A1__X_A2__XXXXXXXXXXXX
___________ _____ _____
tkeep XXXXXXXXX_K0________X_K1__X_K2__XXXXXXXXXXXX
_______________________
tvalid ________/ \___________
_________________
tready ______________/ \___________
_____
tlast __________________________/ \___________
tuser ____________________________________________
two byte transfer with sink pause after each byte
__ __ __ __ __ __ __ __ __
clk __/ \__/ \__/ \__/ \__/ \__/ \__/ \__/ \__/ \__
_____ _________________
tdata XXXXXXXXX_D0__X_D1______________XXXXXXXXXXXXXXXXXXXXXXXX
_____ _________________
tkeep XXXXXXXXX_K0__X_K1______________XXXXXXXXXXXXXXXXXXXXXXXX
_______________________
tvalid ________/ \_______________________
______________ _____ ___________
tready \___________/ \___________/
_________________
tlast ______________/ \_______________________
tuser ________________________________________________________
two back-to-back packets, no pauses
__ __ __ __ __ __ __ __ __
clk __/ \__/ \__/ \__/ \__/ \__/ \__/ \__/ \__/ \__
_____ _____ _____ _____ _____ _____
tdata XXXXXXXXX_A0__X_A1__X_A2__X_B0__X_B1__X_B2__XXXXXXXXXXXX
_____ _____ _____ _____ _____ _____
tkeep XXXXXXXXX_K0__X_K1__X_K2__X_K0__X_K1__X_K2__XXXXXXXXXXXX
___________________________________
tvalid ________/ \___________
________________________________________________________
tready
_____ _____
tlast ____________________/ \___________/ \___________
tuser ________________________________________________________
bad frame
__ __ __ __ __ __
clk __/ \__/ \__/ \__/ \__/ \__/ \__
_____ _____ _____
tdata XXXXXXXXX_A0__X_A1__X_A2__XXXXXXXXXXXX
_____ _____ _____
tkeep XXXXXXXXX_K0__X_K1__X_K2__XXXXXXXXXXXX
_________________
tvalid ________/ \___________
______________________________________
tready
_____
tlast ____________________/ \___________
_____
tuser ____________________/ \___________
Running the included testbenches requires MyHDL and Icarus Verilog. Make sure that myhdl.vpi is installed properly for cosimulation to work correctly. The testbenches can be run with a Python test runner like nose or py.test, or the individual test scripts can be run with python directly.
tb/arp_ep.py : MyHDL ARP frame endpoints
tb/axis_ep.py : MyHDL AXI Stream endpoints
tb/baser_serdes.py : MyHDL 10GBASE-R SERDES endpoints
tb/eth_ep.py : MyHDL Ethernet frame endpoints
tb/gmii_ep.py : MyHDL GMII endpoints
tb/ip_ep.py : MyHDL IP frame endpoints
tb/mii_ep.py : MyHDL MII endpoints
tb/ptp.py : MyHDL PTP clock model
tb/rgmii_ep.py : MyHDL RGMII endpoints
tb/udp_ep.py : MyHDL UDP frame endpoints
tb/xgmii_ep.py : MyHDL XGMII endpoints