-
Notifications
You must be signed in to change notification settings - Fork 0
acutetech/Himax_examples
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
Some sample code from Himax - 28/6/24 ========================================= These samples recived by email on 25/6/24. Should probably be added to the main SDK, but parked here for the moment. The email included this: 1 Sample code showing how to configure the HX6538 PA2/PA3 as an I2C slave, and exchange data. Ans : You can refer to the attached sample code ~\scenario_app\i2c_slave_app\i2c_slave_app.c to configure PA2/PA3 as I2C slave and callback function. void I2C_SLV_Init() { uint32_t i2c_s_id = USE_DW_IIC_SLV_0; hx_drv_scu_set_PA2_pinmux(SCU_PA2_PINMUX_SB_I2C_S_SCL_0, 1); hx_drv_scu_set_PA3_pinmux(SCU_PA3_PINMUX_SB_I2C_S_SDA_0, 1); hx_drv_i2cs_init(i2c_s_id, HX_I2C_HOST_SLV_0_BASE); dev_iic_slv = hx_drv_i2cs_get_dev(i2c_s_id); dev_iic_slv->iic_control(DW_IIC_CMD_SET_TXCB, (void *)i2c_s_callback_fun_tx); dev_iic_slv->iic_control(DW_IIC_CMD_SET_RXCB, (void *)i2c_s_callback_fun_rx); dev_iic_slv->iic_control(DW_IIC_CMD_SET_ERRCB, (void *)i2c_s_callback_fun_err); dev_iic_slv->iic_control(DW_IIC_CMD_SLV_SET_SLV_ADDR, (void*)slave_addr); i2cs_read_enable(BUFF_SIZE); } 2 Sample code showing how to place the HX6538 in a low power shutdown state and wake it with an interrupt. Ans : You can refer to the attached sample code ~\scenario_app\seeed_sample\seeed_sample.c to configure HX6538 in a low power shutdown state and wake it with an interrupt(PA0(D0)/AON_GPIO0). /** * This function sets TIMER ID 2 or AON_GPIO0(PA0)/AON_GPIO1(PA1) as Power Down mode wake up sources. * This function supports memory retention or memory no retention. * * @param timer_ms The wake up timer(millisecond). * @param aon_gpio The index of the AON_GPIO pin to set as wake up source. * 0: AON_GPIO0(PA0), 1: AON_GPIO1(PA1), 0xFF: disable aon_gpio wake up. * @param retention Memory retention or not. * */ void app_pmu_enter_sleep(uint32_t timer_ms, uint32_t aon_gpio, uint32_t retention); app_pmu_enter_sleep(0, 0, 0); // AON_GPIO0(PA0) wake up, memory no retention
About
Samples emailed by Himax 25 June 2024
Resources
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published