[V1] TP Ray executor (vllm-project#11107)

Signed-off-by: Rui Qiao <[email protected]>

tests/basic_correctness/test_basic_correctness.py

@@ -130,7 +130,7 @@ def test_models_distributed(
     # Import VLLM_USE_V1 dynamically to handle patching
     from vllm.envs import VLLM_USE_V1
     if VLLM_USE_V1 and distributed_executor_backend != "mp":
-        pytest.skip(f"Skip {distributed_executor_backend} for V1")
+        os.environ["VLLM_ENABLE_V1_MULTIPROCESSING"] = "0"
 
     dtype = "half"
     max_tokens = 5

vllm/v1/engine/llm_engine.py

@@ -21,6 +21,7 @@
 from vllm.v1.engine.detokenizer import Detokenizer
 from vllm.v1.engine.processor import Processor
 from vllm.v1.executor.abstract import Executor
+from vllm.v1.executor.ray_utils import initialize_ray_cluster
 
 logger = init_logger(__name__)
 
@@ -110,7 +111,11 @@ def _get_executor_cls(cls, vllm_config: VllmConfig) -> Type[Executor]:
         executor_class: Type[Executor]
         distributed_executor_backend = (
             vllm_config.parallel_config.distributed_executor_backend)
-        if distributed_executor_backend == "mp":
+        if distributed_executor_backend == "ray":
+            initialize_ray_cluster(vllm_config.parallel_config)
+            from vllm.v1.executor.ray_executor import RayExecutor
+            executor_class = RayExecutor
+        elif distributed_executor_backend == "mp":
             from vllm.v1.executor.multiproc_executor import MultiprocExecutor
             executor_class = MultiprocExecutor
         else:

vllm/v1/executor/ray_executor.py

@@ -0,0 +1,339 @@
+import os
+from collections import defaultdict
+from itertools import islice, repeat
+from typing import TYPE_CHECKING, Any, Dict, List, Optional, Tuple
+
+import vllm.envs as envs
+from vllm.config import VllmConfig
+from vllm.logger import init_logger
+from vllm.utils import get_distributed_init_method, get_ip, get_open_port
+from vllm.v1.executor.abstract import Executor
+from vllm.v1.executor.ray_utils import RayWorkerWrapper, ray
+from vllm.v1.outputs import ModelRunnerOutput
+
+if ray is not None:
+    from ray.util.scheduling_strategies import PlacementGroupSchedulingStrategy
+
+if TYPE_CHECKING:
+    from ray.util.placement_group import PlacementGroup
+
+logger = init_logger(__name__)
+
+
+class RayExecutor(Executor):
+
+    def __init__(self, vllm_config: VllmConfig) -> None:
+        self.vllm_config = vllm_config
+        self.parallel_config = vllm_config.parallel_config
+        self.model_config = vllm_config.model_config
+        self.forward_dag: Optional[ray.dag.CompiledDAG] = None
+
+        # Disable Ray usage stats collection.
+        ray_usage = os.environ.get("RAY_USAGE_STATS_ENABLED", "0")
+        if ray_usage != "1":
+            os.environ["RAY_USAGE_STATS_ENABLED"] = "0"
+
+        placement_group = self.parallel_config.placement_group
+        # Create the parallel GPU workers.
+        self._init_workers_ray(placement_group)
+
+    def _init_workers_ray(self, placement_group: "PlacementGroup",
+                          **ray_remote_kwargs):
+        # A list of workers to run a model.
+        self.workers: List[RayWorkerWrapper] = []
+        if self.parallel_config.ray_workers_use_nsight:
+            ray_remote_kwargs = self._configure_ray_workers_use_nsight(
+                ray_remote_kwargs)
+
+        # Create the workers.
+        driver_ip = get_ip()
+        for bundle_id, bundle in enumerate(placement_group.bundle_specs):
+            if not bundle.get("GPU", 0):
+                # Skip bundles that don't have GPUs,
+                # as each worker needs one GPU.
+                continue
+            scheduling_strategy = PlacementGroupSchedulingStrategy(
+                placement_group=placement_group,
+                placement_group_capture_child_tasks=True,
+                placement_group_bundle_index=bundle_id,
+            )
+
+            worker = ray.remote(
+                num_cpus=0,
+                num_gpus=1,
+                scheduling_strategy=scheduling_strategy,
+                **ray_remote_kwargs,
+            )(RayWorkerWrapper).remote(vllm_config=self.vllm_config)
+            self.workers.append(worker)
+
+        logger.debug("workers: %s", self.workers)
+        worker_ips = [
+            ray.get(worker.get_node_ip.remote())  # type: ignore[attr-defined]
+            for worker in self.workers
+        ]
+        ip_counts: Dict[str, int] = {}
+        for ip in worker_ips:
+            ip_counts[ip] = ip_counts.get(ip, 0) + 1
+
+        worker_to_ip = dict(zip(self.workers, worker_ips))
+
+        def sort_by_driver_then_worker_ip(worker):
+            """
+            Sort the workers based on 3 properties:
+            1. If the worker is on the same node as the driver (vllm engine),
+                it should be placed first.
+            2. Then, if the worker is on a node with fewer workers, it should
+                be placed first.
+            3. Finally, if the work is on a node with smaller IP address, it
+                should be placed first. This is simply a tiebreaker to make
+                sure the workers are sorted in a deterministic way.
+            """
+            ip = worker_to_ip[worker]
+            return (ip != driver_ip, ip_counts[ip], ip)
+
+        # After sorting, the workers on the same node will be
+        # close to each other, and the workers on the driver
+        # node will be placed first.
+        self.workers = sorted(self.workers, key=sort_by_driver_then_worker_ip)
+
+        # Get the set of GPU IDs used on each node.
+        worker_node_and_gpu_ids = self._run_workers("get_node_and_gpu_ids")
+
+        node_workers = defaultdict(list)  # node id -> list of worker ranks
+        node_gpus = defaultdict(list)  # node id -> list of gpu ids
+
+        for i, (node_id, gpu_ids) in enumerate(worker_node_and_gpu_ids):
+            node_workers[node_id].append(i)
+            # `gpu_ids` can be a list of strings or integers.
+            # convert them to integers for consistency.
+            # NOTE: gpu_ids can be larger than 9 (e.g. 16 GPUs),
+            # string sorting is not sufficient.
+            # see https://github.com/vllm-project/vllm/issues/5590
+            gpu_ids = [int(x) for x in gpu_ids]
+            node_gpus[node_id].extend(gpu_ids)
+
+        for node_id, gpu_ids in node_gpus.items():
+            node_gpus[node_id] = sorted(gpu_ids)
+
+        all_ips = set(worker_ips)
+        n_ips = len(all_ips)
+        n_nodes = len(node_workers)
+
+        if n_nodes != n_ips:
+            raise RuntimeError(
+                f"Every node should have a unique IP address. Got {n_nodes}"
+                f" nodes with node ids {list(node_workers.keys())} and "
+                f"{n_ips} unique IP addresses {all_ips}. Please check your"
+                " network configuration. If you set `VLLM_HOST_IP` or "
+                "`HOST_IP` environment variable, make sure it is unique for"
+                " each node.")
+
+        # Set environment variables for the driver and workers.
+        all_args_to_update_environment_variables = [({
+            "CUDA_VISIBLE_DEVICES":
+            ",".join(map(str, node_gpus[node_id])),
+            "VLLM_TRACE_FUNCTION":
+            str(envs.VLLM_TRACE_FUNCTION),
+            "VLLM_USE_V1":
+            str(int(envs.VLLM_USE_V1)),
+            **({
+                "VLLM_ATTENTION_BACKEND": envs.VLLM_ATTENTION_BACKEND
+            } if envs.VLLM_ATTENTION_BACKEND is not None else {})
+        }, ) for (node_id, _) in worker_node_and_gpu_ids]
+
+        self._env_vars_for_all_workers = (
+            all_args_to_update_environment_variables)
+
+        self._run_workers("update_environment_variables",
+                          all_args=self._get_env_vars_to_be_updated())
+
+        if len(node_gpus) == 1:
+            # in single node case, we don't need to get the IP address.
+            # the loopback address is sufficient
+            # NOTE: a node may have several IP addresses, one for each
+            # network interface. `get_ip()` might return any of them,
+            # while they might not work for communication inside the node
+            # if the network setup is complicated. Using the loopback address
+            # solves this issue, as it always works for communication inside
+            # the node.
+            driver_ip = "127.0.0.1"
+        distributed_init_method = get_distributed_init_method(
+            driver_ip, get_open_port())
+
+        # Initialize the actual workers inside worker wrapper.
+        init_worker_all_kwargs = [
+            self._get_worker_kwargs(
+                local_rank=node_workers[node_id].index(rank),
+                rank=rank,
+                distributed_init_method=distributed_init_method,
+            ) for rank, (node_id, _) in enumerate(worker_node_and_gpu_ids)
+        ]
+        self._run_workers("init_worker", all_kwargs=init_worker_all_kwargs)
+        self._run_workers("initialize")
+        self._run_workers("load_model")
+
+    def _configure_ray_workers_use_nsight(self,
+                                          ray_remote_kwargs) -> Dict[str, Any]:
+        # If nsight profiling is enabled, we need to set the profiling
+        # configuration for the ray workers as runtime env.
+        runtime_env = ray_remote_kwargs.setdefault("runtime_env", {})
+        runtime_env.update({
+            "nsight": {
+                "t": "cuda,cudnn,cublas",
+                "o": "'worker_process_%p'",
+                "cuda-graph-trace": "node",
+            }
+        })
+
+        return ray_remote_kwargs
+
+    def _get_env_vars_to_be_updated(self):
+        return self._env_vars_for_all_workers
+
+    def _get_worker_kwargs(
+            self,
+            local_rank: int = 0,
+            rank: int = 0,
+            distributed_init_method: Optional[str] = None) -> Dict[str, Any]:
+        """
+        Return worker init args for a given rank.
+        """
+        if distributed_init_method is None:
+            distributed_init_method = get_distributed_init_method(
+                get_ip(), get_open_port())
+        return dict(
+            vllm_config=self.vllm_config,
+            local_rank=local_rank,
+            rank=rank,
+            distributed_init_method=distributed_init_method,
+        )
+
+    def determine_num_available_blocks(self) -> Tuple[int, int]:
+        """
+        Determine the number of available KV blocks.
+        
+        This invokes `determine_num_available_blocks` on each worker and takes
+        the min of the results, guaranteeing that the selected cache sizes are
+        compatible with all workers.
+        
+        Returns:
+            - tuple[num_gpu_blocks, num_cpu_blocks]
+        """
+        # Get the maximum number of blocks that can be allocated on GPU and CPU.
+        num_blocks = self._run_workers("determine_num_available_blocks")
+
+        # Since we use a shared centralized controller, we take the minimum
+        # number of blocks across all workers to make sure all the memory
+        # operators can be applied to all workers.
+        num_gpu_blocks = min(b[0] for b in num_blocks)
+        num_cpu_blocks = min(b[1] for b in num_blocks)
+
+        return num_gpu_blocks, num_cpu_blocks
+
+    def initialize(self, num_gpu_blocks: int) -> None:
+        """
+        Initialize the KV cache in all workers.
+        """
+        # NOTE: This is logged in the executor because there can be >1 worker
+        # with other executors. We could log in the engine level, but work
+        # remains to abstract away the device for non-GPU configurations.
+        logger.info("# GPU blocks: %d", num_gpu_blocks)
+        self._run_workers("initialize_cache", num_gpu_blocks)
+        self._run_workers("compile_or_warm_up_model")
+
+    def _run_workers(
+        self,
+        method: str,
+        *args,
+        all_args: Optional[List[Tuple[Any, ...]]] = None,
+        all_kwargs: Optional[List[Dict[str, Any]]] = None,
+        **kwargs,
+    ) -> Any:
+        """
+        Runs the given method on all workers. Can be used in the following
+        ways:
+
+        Args:
+        - args/kwargs: All workers share the same args/kwargs
+        - all_args/all_kwargs: args/kwargs for each worker are specified
+          individually
+        """
+        count = len(self.workers)
+        all_worker_args = repeat(args, count) if all_args is None \
+            else islice(all_args, 0, None)
+        all_worker_kwargs = repeat(kwargs, count) if all_kwargs is None \
+            else islice(all_kwargs, 0, None)
+
+        ray_worker_refs = [
+            worker.execute_method.remote(  # type: ignore[attr-defined]
+                method, *worker_args, **worker_kwargs)
+            for (worker, worker_args, worker_kwargs
+                 ) in zip(self.workers, all_worker_args, all_worker_kwargs)
+        ]
+        return ray.get(ray_worker_refs)
+
+    def execute_model(
+        self,
+        scheduler_output,
+    ) -> ModelRunnerOutput:
+        if self.forward_dag is None:
+            self.forward_dag = self._compiled_ray_dag()
+        # Only the first worker (with rank 0) returns the execution result.
+        # Others return None.
+        output = ray.get(self.forward_dag.execute(scheduler_output))[0]
+        return output
+
+    def profile(self, is_start=True):
+        raise NotImplementedError
+
+    def shutdown(self):
+        if hasattr(self, "forward_dag") and self.forward_dag is not None:
+            self.forward_dag.teardown()
+            import ray
+            for worker in self.workers:
+                ray.kill(worker)
+            self.forward_dag = None
+
+    def check_health(self) -> None:
+        logger.debug("Called check_health.")
+
+    def _check_ray_compiled_graph_installation(self):
+        import pkg_resources
+        from packaging import version
+
+        required_version = version.parse("2.39")
+        current_version = version.parse(
+            pkg_resources.get_distribution("ray").version)
+        if current_version < required_version:
+            raise ValueError(f"Ray version {required_version} is "
+                             f"required, but found {current_version}")
+
+        import importlib.util
+        raycg = importlib.util.find_spec("ray.experimental.compiled_dag_ref")
+        if raycg is None:
+            raise ValueError("Ray Compiled Graph is not installed. "
+                             "Run `pip install ray[adag]` to install it.")
+
+        cupy_spec = importlib.util.find_spec("cupy")
+        if cupy_spec is None and envs.VLLM_USE_RAY_COMPILED_DAG_NCCL_CHANNEL:
+            raise ValueError(
+                "cupy is not installed but required since "
+                "VLLM_USE_RAY_COMPILED_DAG_NCCL_CHANNEL is set."
+                "Run `pip install ray[adag]` and check cupy installation.")
+
+    def _compiled_ray_dag(self):
+        assert self.parallel_config.use_ray
+        self._check_ray_compiled_graph_installation()
+        from ray.dag import InputNode, MultiOutputNode
+
+        with InputNode() as input_batches:
+            outputs = [
+                worker.execute_model.bind(  # type: ignore[attr-defined]
+                    input_batches) for worker in self.workers
+            ]
+            forward_dag = MultiOutputNode(outputs)
+
+        return forward_dag.experimental_compile()
+
+    def __del__(self):
+        self.shutdown()