Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

octopus pro 1.1 config changes #137

Merged
merged 1 commit into from
Oct 29, 2023
Merged

octopus pro 1.1 config changes #137

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
15 changes: 13 additions & 2 deletions Firmware/Octopus/Trident_Octopus_Config.cfg
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -12,9 +12,11 @@
## *** THINGS TO CHANGE/CHECK: ***
## MCU paths [mcu] section
## Thermistor types [extruder] and [heater_bed] sections - See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types
## Hotend heater pin [extruder] section
## Leadscrew Rotation Distance [stepper_z], [stepper_z1], [stepper_z2]
## Z Endstop Switch location [safe_z_home] section
## Z Endstop Switch offset for Z0 [stepper_z] section
## Stepper Z1 enable pin [stepper_z1] section
## PID tune [extruder] and [heater_bed] sections
## Probe pin [probe] section
## Fine tune E steps [extruder] section
Expand Down Expand Up @@ -156,7 +158,10 @@ stealthchop_threshold: 0
[stepper_z1]
step_pin: PG4
dir_pin: PC1
enable_pin: !PA0
## Octopus 1.0 & 1.1. Octopus PRO 1.0
#enable_pin: !PA0
## Octopus PRO 1.1
#enable_pin: !PA2
# Rotation Distance for TR8x8 = 8, TR8x4 = 4, TR8x2 = 2
# rotation_distance: 8
microsteps: 32
Expand Down Expand Up @@ -213,7 +218,10 @@ microsteps: 32
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
nozzle_diameter: 0.400
filament_diameter: 1.75
heater_pin: PA2
## Octopus 1.0 & 1.1. Octopus PRO 1.0
#heater_pin: PA2
## Octopus PRO 1.1
#heater_pin: PA0
## Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types.
## Use "Generic 3950" for NTC 100k 3950 thermistors
#sensor_type:
Expand Down Expand Up @@ -337,7 +345,10 @@ heater: heater_bed

#[output_pin caselight]
# Chamber Lighting - HE2 Connector (Optional)
##Octopus 1.0 & 1.1, Octopus PRO 1.0
#pin: PB10
##Octopus PRO 1.1
#pin: PB0
#pwm:true
#shutdown_value: 0
#value:1
Expand Down