42 Push Swap Tester

This is a tester for the 42 Push Swap project. It is designed to test the functionality and correctness of the push_swap program.

Usage

To run the tester, make sure you have Python 3 installed on your system. Then, follow the steps below:

1. Clone the Push Swap project repository.

2. Navigate to the directory where the push_swap program is located.

3. Copy the run_push_swap.py file from this tester repository into the same directory.

4. Open a terminal and navigate to the directory where the push_swap program and run_push_swap.py file are located.

5. Run the tester by executing the following command:

   python3 run_push_swap.py

6. The tester will display the results of the tests and output the number of tests passed and failed.

7. If any of the test is over the maximum for +5pts in the evaluation it will save a .txt file with the test that failed.

Customizing the Tester

You can customize the behavior of the tester by modifying the following variables in the run_push_swap.py file:

• batch: The number of tests to run in each batch. The tester will run batch tests and display the results before moving on to the next batch.
• number_to_test: The number of random numbers to test the push_swap program with. By default, the tester will test the program with 5, 100, and 500 random numbers.

Contributing

If you encounter any issues with the tester or have suggestions for improvements, feel free to open an issue or submit a pull request.