Add docs for max output option for apsystems integration (home-assist…

…ant#33082)

* Add docs for max output option for apsystems integration

* Change APsystems HA release version to 2024.7

* Set release back to 2024.6 after being confused for apsystems integration

source/_integrations/apsystems.markdown

@@ -9,16 +9,21 @@ ha_category:
 ha_domain: apsystems
 ha_platforms:
   - sensor
+  - number
 ha_integration_type: device
 ---
 
-The **APsystems** {% term integration %} allows you to read the data from your [APsystems EZ1](https://emea.apsystems.com/diy/ez1/) microinverter.
+The **APsystems** {% term integration %} allows you to read the data from your [APsystems EZ1](https://emea.apsystems.com/diy/ez1/) microinverter. It also allows you to set the output limit to any number between 30 and 800 watts.
 The following data is provided by the integration:
 
 - Lifetime production (Per input and in total)
 - Current production (Per input and in total)
 - Today's production (Per input and in total)
 
+The following data can be set by the integration:
+
+- Maximal output in watts
+
 ## Prerequisites
 
 Make sure the local API is activated and set to **Continuously**. For that, connect to the inverter via Bluetooth using the app and go to **Settings** > **Local Mode**, set the switch **Enable Local Mode** to on and make sure to set this to **Continuously**.