-
Notifications
You must be signed in to change notification settings - Fork 287
Initial Setup Suricata IPS
Peter Manev edited this page Feb 17, 2024
·
16 revisions
This page is obsolete and referring to old SELKS installation.
For latest SELKS documentation please visit the page here - https://github.com/StamusNetworks/SELKS/wiki/Docker#ips
An example for AF-PACKET Suricata IPS set up with SELKS.
NOTE: On big multi core set ups the total number of threads combined for both interfaces should not be more than the (total number of cores - 4). Ideally less than that as there is also Elasticsearch that needs CPUs.
In /etc/suricata/selks6-addin.yaml
:
af-packet: - interface: enp1s0f0 threads: 4 # or a number that is below half the number of cores available defrag: no cluster-type: cluster_flow cluster-id: 98 copy-mode: ips copy-iface: enp1s0f1 tpacket-v3: no ring-size: 2048 use-mmap: yes - interface: enp1s0f1 threads: 4 # or a number that is below half the number of cores available cluster-id: 97 defrag: no cluster-type: cluster_flow copy-mode: ips copy-iface: enp1s0f0 tpacket-v3: no ring-size: 2048 use-mmap: yes
also make sure in /etc/network/interfaces
:
auto lo iface lo inet loopback allow-hotplug eno1 iface eno1 inet static # Management interface address 192.168.0.100 netmask 255.255.252.0 gateway 192.168.0.1 dns-nameservers 192.168.0.11 192.168.0.6 iface enp1s0f0 inet manual pre-up ifconfig $IFACE up post-down ifconfig $IFACE down post-up /etc/network/if-up.d/selks-idps-interface-tuneup_stamus iface enp1s0f1 inet manual pre-up ifconfig $IFACE up post-down ifconfig $IFACE down post-up /etc/network/if-up.d/selks-idps-interface-tuneup_stamus
From Scirius transform the rules you would like from alert
to drop
:
- Select a rule that you would like to transform into
drop
action - Under
Actions
in the left hand side panel selectTransform rule
- Select type
Drop
and a ruleset to be used. - Click on
Valid
- From the
Suricata
main tab in Scirius - selectRuleset actions
on the left hand side panel - Select
Update
(optional),Build
,Push
andApply