Skip to content
Back to pull request #1373

Bump reqwest from 0.11.23 to 0.12.4 #4817

Sign in to view logs

Bump reqwest from 0.11.23 to 0.12.4

Bump reqwest from 0.11.23 to 0.12.4 #4817

Workflow file for this run

.github/workflows/rust.yml at 05db5ae
name: Rust
# On Rust, GitHub Actions, and caching
# ===========
# Here's a list of things to keep in mind if you find yourself maintaining this
# CI:
#
# https://docs.github.com/en/actions/using-workflows/caching-dependencies-to-speed-up-workflows#matching-a-cache-key
#
# - Always install and select the desired Rust toolchain *before* running
# `Swatinem/rust-cache`. This is because the active Rust toolchain is used as
# a cache key.
# - You can use `rustup show` to install and select the right Rust toolchain if
# you have a `rust-toolchain.toml` file:
# https://github.com/rust-lang/rustup/issues/1397.
# - When caching Rust compilation artifacts, keep in mind that different `cargo`
# commands will use different profiles
# (https://doc.rust-lang.org/cargo/reference/profiles.html). Learn what you
# can reuse between one job and another and don't assume two commands will
# just share caches without conflicts.
# - Be extremely aware of cache thrashing a.k.a. churning. GitHub Actions' cache
# allows for 10GiB of data which is easily exceeded if not careful.
# Sometimes it's better not to cache than cache excessively.
# Disabling cache writes for non-default branches altogether if cache churning
# is unacceptably high is supposed to help with this.
# - Learn cache invalidation rules of `Swatinem/rust-cache` before making
# changes, e.g. what happens when `rustc --version` changes or `Cargo.lock`
# changes (or is missing).
# - The jobs dependency tree is the way it is to accommodate for sharing caches,
# not necessarily because it makes logical sense to run one job after the
# other. This is due to the fact that we can't share caches between jobs that
# run in parallel.
# - `sccache` is a good alternative to `Swatinem/rust-cache`, but it behaves
# poorly with GHA and often incurs into cache requests rate limits. We should
# probably explore `sccache` with a different backend.
# - If a job makes good use of extra cores, consider give it a bigger machine.
# GHA larger runners increase in cost linearly with the number of cores
# (https://docs.github.com/en/billing/managing-billing-for-github-actions/about-billing-for-github-actions),
# so you're not wasting money unless several cores are sitting idle for long.
on:
# Relevant docs:
# - https://docs.github.com/en/repositories/configuring-branches-and-merges-in-your-repository/configuring-pull-request-merges/managing-a-merge-queue#how-merge-queues-work
# - https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#merge_group
merge_group:
types: ["checks_requested"]
push:
branches: ["nightly", "stable"]
pull_request:
branches: ["nightly", "stable"]
env:
CARGO_TERM_COLOR: always
RUSTFLAGS: -D warnings
# Automatically cancels a job if a new commit if pushed to the same PR, branch, or tag.
# Source: <https://stackoverflow.com/a/72408109/5148606>
concurrency:
group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
# Except in `nightly` and `stable` branches! Any cancelled job will cause the
# CI run to fail, and we want to keep a clean history for major branches.
cancel-in-progress: ${{ (github.ref != 'refs/heads/nightly') && (github.ref != 'refs/heads/stable') }}
jobs:
check-aggregate:
# Follows the guide at <https://github.com/re-actors/alls-green>.
runs-on: ubuntu-latest
if: always()
needs:
# If you're modifying this workflow file and you're adding/removing a job
# which should be required to pass before merging a PR, don't forget to
# update this list!
- check
- check_no_std
- hack
- nextest
- test
- coverage
- check-licenses
- cargo-doc-artifact
- deploy-github-pages
- check-demo-rollup-table-of-contents
- check-demo-rollup-bash-commands
- validate-packages-to-publish-yml
steps:
- name: Compute whether the needed jobs succeeded or failed
uses: re-actors/alls-green@release/v1
with:
allowed-skips: deploy-github-pages
jobs: ${{ toJSON(needs) }}
check:
name: check
runs-on: buildjet-4vcpu-ubuntu-2204
timeout-minutes: 60
steps:
- uses: actions/checkout@v3
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install Rust
run: rustup show && rustup install nightly && rustup component add rustfmt --toolchain nightly-x86_64-unknown-linux-gnu # Nightly is needed for our configuration of cargo fmt
- name: Install cargo-risczero
uses: taiki-e/install-action@v2
with:
tool: [email protected]
- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
run: cargo risczero install
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
shared-key: cargo-check-cache
save-if: ${{ github.ref == 'refs/heads/nightly' }}
workspaces: |
.
fuzz
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
- name: Run lint
run: |
if ! make lint ; then
echo "Linting or formatting errors detected, please run 'make lint-fix' to fix it";
exit 1
fi
check_no_std:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v3
- name: Install Rust Bare Metal
uses: actions-rs/toolchain@v1
with:
toolchain: stable
target: thumbv6m-none-eabi
override: true
- name: Install Rust WASM
uses: actions-rs/toolchain@v1
with:
toolchain: stable
target: wasm32-unknown-unknown
override: true
- name: cargo install cargo-hack
uses: taiki-e/install-action@cargo-hack
- uses: Swatinem/rust-cache@v2
with:
save-if: ${{ github.ref == 'refs/heads/nightly' }}
- name: Run check
run: make check-no-std
prover_bench_check:
name: prover_bench_check
needs: check
runs-on: buildjet-8vcpu-ubuntu-2204
timeout-minutes: 120
steps:
- uses: actions/checkout@v3
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install Rust
run: rustup show && rustup install nightly && rustup component add rustfmt --toolchain nightly-x86_64-unknown-linux-gnu
- name: Install cargo-risczero
uses: taiki-e/install-action@v2
with:
tool: [email protected]
- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
run: cargo risczero install
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
shared-key: cargo-check-cache
save-if: ${{ github.ref == 'refs/heads/nightly' }}
workspaces: |
.
fuzz
- name: cargo prover bench check
env:
BLOCKS: 1
TXNS_PER_BLOCK: 10
NUM_PUB_KEYS: 100
run: sh ci_prover_count_check.sh
bench_check:
name: bench_check
needs: check
runs-on: buildjet-8vcpu-ubuntu-2204
timeout-minutes: 120
steps:
- uses: actions/checkout@v3
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install Rust
run: rustup show && rustup install nightly && rustup component add rustfmt --toolchain nightly-x86_64-unknown-linux-gnu
- name: Install cargo-risczero
uses: taiki-e/install-action@v2
with:
tool: [email protected]
- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
run: cargo risczero install
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
shared-key: cargo-check-cache
save-if: ${{ github.ref == 'refs/heads/nightly' }}
workspaces: |
.
fuzz
- name: cargo bench check
env:
BLOCKS: 1
TXNS_PER_BLOCK: 10
NUM_PUB_KEYS: 100
run: cargo bench
rollup_bench_check:
name: rollup_bench_check
needs: check
runs-on: buildjet-8vcpu-ubuntu-2204
timeout-minutes: 120
steps:
- uses: actions/checkout@v3
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install Rust
run: rustup show && rustup install nightly && rustup component add rustfmt --toolchain nightly-x86_64-unknown-linux-gnu
- name: Install cargo-risczero
uses: taiki-e/install-action@v2
with:
tool: [email protected]
- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
run: cargo risczero install
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
shared-key: cargo-check-cache
save-if: ${{ github.ref == 'refs/heads/nightly' }}
workspaces: |
.
fuzz
- name: rollup bench check
env:
BLOCKS: 10
TXNS_PER_BLOCK: 10000
NUM_PUB_KEYS: 100
run: sh ci_rollup_count_check.sh
# Check that every combination of features is working properly.
hack:
name: features
# `cargo-hack` uses the same profile as `cargo check` and doesn't require
# building dependencies, only checking them, so we can share caches
# effectively.
needs: check
runs-on: buildjet-8vcpu-ubuntu-2204
timeout-minutes: 120
env:
SKIP_GUEST_BUILD: "1"
steps:
- uses: actions/checkout@v3
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install Rust
run: rustup show
- name: cargo install cargo-hack
uses: taiki-e/install-action@cargo-hack
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
shared-key: cargo-check-cache
save-if: ${{ github.ref == 'refs/heads/nightly' }}
workspaces: |
.
fuzz
# intentionally no target specifier; see https://github.com/jonhoo/rust-ci-conf/pull/4
- name: cargo hack
run: make check-features
nextest:
name: nextest
runs-on: buildjet-4vcpu-ubuntu-2204
timeout-minutes: 60
steps:
- uses: actions/checkout@v3
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install cargo-risczero
uses: taiki-e/install-action@v2
with:
tool: [email protected]
- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
run: cargo risczero install
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
# `cargo-nextest` is much faster than standard `cargo test`.
- uses: taiki-e/install-action@nextest
- name: Install Rust
run: rustup show
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
save-if: ${{ github.ref == 'refs/heads/nightly' }}
- run: cargo nextest run --workspace --all-features
test:
name: test
runs-on: buildjet-4vcpu-ubuntu-2204
timeout-minutes: 60
steps:
- uses: actions/checkout@v3
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install cargo-risczero
uses: taiki-e/install-action@v2
with:
tool: [email protected]
- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
run: cargo risczero install
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
- name: Install Rust
run: rustup show
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
save-if: ${{ github.ref == 'refs/heads/nightly' }}
# `cargo-nextest` does not support doctests (yet?), so we have to run them
# separately.
# TODO: https://github.com/nextest-rs/nextest/issues/16
- run: cargo test --workspace --doc --all-features
coverage:
name: coverage
runs-on: buildjet-8vcpu-ubuntu-2204
timeout-minutes: 90
steps:
- uses: actions/checkout@v3
with:
submodules: true
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install Rust
run: rustup show
- name: add llvm component
run: rustup component add llvm-tools-preview
- name: cargo install cargo-llvm-cov
uses: taiki-e/install-action@cargo-llvm-cov
- name: Install cargo-risczero
uses: taiki-e/install-action@v2
with:
tool: [email protected]
- name: Install risc0-zkvm toolchain
run: cargo risczero install
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
save-if: ${{ github.ref == 'refs/heads/nightly' }}
- name: cargo generate-lockfile
if: hashFiles('Cargo.lock') == ''
run: cargo generate-lockfile
- name: cargo llvm-cov
run: make coverage
- name: Upload to codecov.io
uses: codecov/codecov-action@v3
with:
# When retry is implemented, we can enable it again: https://github.com/codecov/codecov-action/issues/926
fail_ci_if_error: false
check-licenses:
runs-on: ubuntu-latest
timeout-minutes: 30
steps:
- uses: actions/checkout@v3
- uses: taiki-e/install-action@cargo-deny
- run: cargo deny check licenses
cargo-doc-artifact:
runs-on: ubuntu-latest
timeout-minutes: 90
env:
RUSTDOCFLAGS: "-D warnings"
SKIP_GUEST_BUILD: "1"
steps:
- uses: actions/checkout@v3
# Not sure installing `mold` is actually needed, but it's what the
# `check` job, and we'd rather keep things as similar as possible.
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install Rust
run: rustup show
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
save-if: ${{ github.ref == 'refs/heads/nightly' }}
# The docs' artifact tends to become quite large with all the
# dependencies, so we don't include them.
- run: cargo doc --no-deps --all-features
- name: Add index.html
# We're inside a Cargo workspace, so there's no index.html by default.
# We must redirect to one of the workspace member crates' documentation.
# <https://dev.to/deciduously/prepare-your-rust-api-docs-for-github-pages-2n5i>
run: echo '<meta http-equiv="refresh" content="0; url=sov_rollup_interface/index.html">' > target/doc/index.html
# https://github.com/actions/deploy-pages/issues/188
- name: Fix assets' file permissions
run: chmod -c -R +rX "target/doc"
- name: Upload artifacts
uses: actions/upload-pages-artifact@v1
with:
path: target/doc
deploy-github-pages:
needs: cargo-doc-artifact
timeout-minutes: 5
if: github.ref == 'refs/heads/stable'
# Grant GITHUB_TOKEN the permissions required to make a Pages deployment
permissions:
pages: write # to deploy to Pages
id-token: write # to verify the deployment originates from an appropriate source
# Deploy to the github-pages environment
environment:
name: github-pages
url: ${{ steps.deployment.outputs.page_url }}
runs-on: ubuntu-latest
steps:
- name: Deploy to GitHub Pages
id: deployment
uses: actions/deploy-pages@v2
check-demo-rollup-table-of-contents:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v3
- uses: actions/setup-node@v3
- run: npm install -g doctoc
- name: Update table of contents for mock-da
run: doctoc README.md --github --notitle
working-directory: ./examples/demo-rollup
- name: Update table of contents for celestia-da
run: doctoc README_CELESTIA.md --github --notitle
working-directory: ./examples/demo-rollup
- name: Check table of contents
# Exit status 0 means no changes were made, so the table of contents is
# up to date.
run: git diff --exit-code
check-demo-rollup-bash-commands:
runs-on: buildjet-4vcpu-ubuntu-2204
needs: nextest
timeout-minutes: 60
steps:
- uses: actions/checkout@v3
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install cargo-risczero
uses: taiki-e/install-action@v2
with:
tool: [email protected]
- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
run: cargo risczero install
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
- name: Install Rust
run: rustup show
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
save-if: ${{ github.ref == 'refs/heads/nightly' }}
- name: Compile README.md to Bash
run: cargo run --bin bashtestmd -- --input examples/demo-rollup/README_CELESTIA.md --output demo-rollup-readme.sh --tag test-ci
- run: cat demo-rollup-readme.sh
- run: chmod +x demo-rollup-readme.sh && ./demo-rollup-readme.sh
check-demo-rollup-bash-commands-mock-da:
runs-on: buildjet-4vcpu-ubuntu-2204
needs: nextest
timeout-minutes: 60
steps:
- uses: actions/checkout@v3
- uses: rui314/setup-mold@v1
- name: Install Protoc
uses: arduino/setup-protoc@v2
with:
version: "23.2"
repo-token: ${{ secrets.GITHUB_TOKEN }}
- name: Install cargo-risczero
uses: taiki-e/install-action@v2
with:
tool: [email protected]
- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
run: cargo risczero install
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
- name: Install Rust
run: rustup show
- uses: Swatinem/rust-cache@v2
with:
cache-provider: "buildjet"
save-if: ${{ github.ref == 'refs/heads/nightly' }}
- name: Compile README.md to Bash
run: cargo run --bin bashtestmd -- --input examples/demo-rollup/README.md --output demo-rollup-readme.sh --tag test-ci
- run: cat demo-rollup-readme.sh
- run: chmod +x demo-rollup-readme.sh && ./demo-rollup-readme.sh
validate-packages-to-publish-yml:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v3
- run: ./scripts/validate_packages_to_publish_yml.sh
shell: bash
working-directory: .