A voltage converter for 3D printers.
When modifying a 3D printer, sometimes you need smaller Voltages to run for example a Raspberry PI or 12V Fans. Smaller buck converter modules are useful but can be hard to mount or connect multiple devices to. The Supluwu is a small board meant to fix this.
The Supluwu features 2 Voltage rails with 5V and 12V. Each Voltage Rail is capable of 5A and is spread out over 3 Terminals. The Input of each Rail is Fused with a 20mmx5mm glass fuse. The Input Voltage can be anything from 14-30V, so the typical 24V power supply of a 3D printer works fine. Each Terminal has a indicator LED, that lights up, if the buck converter is working properly.
Heat Produced by the Regulator is spread out to the PCB and can be carried away by the PCB mounted 14mmx14mm heat sinks.
