A complex camera support library for Linux, Android, and ChromeOS
Cameras are complex devices that need heavy hardware image processing operations. Control of the processing is based on advanced algorithms that must run on a programmable processor. This has traditionally been implemented in a dedicated MCU in the camera, but in embedded devices algorithms have been moved to the main CPU to save cost. Blurring the boundary between camera devices and Linux often left the user with no other option than a vendor-specific closed-source solution.
To address this problem the Linux media community has very recently started collaboration with the industry to develop a camera stack that will be open-source-friendly while still protecting vendor core IP. libcamera was born out of that collaboration and will offer modern camera support to Linux-based systems, including traditional Linux distributions, ChromeOS and Android.
To fetch the sources, build and install:
git clone git://linuxtv.org/libcamera.git cd libcamera meson build ninja -C build install
The following Debian/Ubuntu packages are required for building libcamera. Other distributions may have differing package names:
- A C++ toolchain: [required]
- Either {g++, clang}
- Meson Build system: [required]
meson (>= 0.55) ninja-build pkg-config
If your distribution doesn't provide a recent enough version of meson, you can install or upgrade it using pip3.
pip3 install --user meson pip3 install --user --upgrade meson
- for the libcamera core: [required]
- python3-yaml python3-ply python3-jinja2
- for IPA module signing: [required]
- libgnutls28-dev openssl
- for the Raspberry Pi IPA: [optional]
libboost-dev
- Support for Raspberry Pi can be disabled through the meson
- 'pipelines' option to avoid this dependency.
- for device hotplug enumeration: [optional]
- libudev-dev
- for documentation: [optional]
- python3-sphinx doxygen graphviz
- for gstreamer: [optional]
- libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev
- for cam: [optional]
- libevent-dev
- for qcam: [optional]
- qtbase5-dev libqt5core5a libqt5gui5 libqt5widgets5 qttools5-dev-tools libtiff-dev
- for tracing with lttng: [optional]
- liblttng-ust-dev python3-jinja2 lttng-tools
- for android: [optional]
- libexif-dev libjpeg-dev libyaml-dev
To use GStreamer plugin from source tree, set the following environment so that GStreamer can find it. This isn't necessary when libcamera is installed.
export GST_PLUGIN_PATH=$(pwd)/build/src/gstreamer
The debugging tool gst-launch-1.0 can be used to construct a pipeline and
test it. The following pipeline will stream from the camera named "Camera 1"
onto the OpenGL accelerated display element on your system.
gst-launch-1.0 libcamerasrc camera-name="Camera 1" ! glimagesink
To show the first camera found you can omit the camera-name property, or you can list the cameras and their capabilities using:
gst-device-monitor-1.0 Video
This will also show the supported stream sizes which can be manually selected if desired with a pipeline such as:
gst-launch-1.0 libcamerasrc ! 'video/x-raw,width=1280,height=720' ! \
glimagesink
Several users have reported issues with meson installation, crux of the issue is a potential version mismatch between the version that root uses, and the version that the normal user uses. On calling ninja -C build, it can't find the build.ninja module. This is a snippet of the error message.
ninja: Entering directory `build' ninja: error: loading 'build.ninja': No such file or directory
This can be solved in two ways:
- Don't install meson again if it is already installed system-wide.
2) If a version of meson which is different from the system-wide version is already installed, uninstall that meson using pip3, and install again without the --user argument.