Skip to content

Commit

Permalink
new TDK IIM42653 IMU driver and ARKV6X Rev 2
Browse files Browse the repository at this point in the history
  • Loading branch information
@AlexKlimaj
AlexKlimaj authored Aug 16, 2023
1 parent 3a16624 commit 0914e7f
Show file tree
Hide file tree
Showing 12 changed files with 1,867 additions and 38 deletions.
1 change: 1 addition & 0 deletions boards/ark/fmu-v6x/default.px4board
View file
Original file line number Diff line number Diff line change
Expand Up @@ -20,6 +20,7 @@ CONFIG_DRIVERS_HEATER=y
CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16507=y
CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
CONFIG_COMMON_LIGHT=y
CONFIG_COMMON_MAGNETOMETER=y
CONFIG_COMMON_OPTICAL_FLOW=y
Expand Down
27 changes: 21 additions & 6 deletions boards/ark/fmu-v6x/init/rc.board_sensors
View file
Original file line number Diff line number Diff line change
Expand Up @@ -66,14 +66,29 @@ then
fi
fi

# Internal SPI bus IIM42652 with SPIX measured frequency of 32.051kHz
iim42652 -R 3 -s -b 1 -C 32051 start
if ver hwtypecmp ARKV6X000000 ARKV6X001000 ARKV6X002000 ARKV6X003000 ARKV6X004000 ARKV6X005000 ARKV6X006000 ARKV6X007000
then
# Internal SPI bus IIM42652 with SPIX measured frequency of 32.051kHz
iim42652 -R 3 -s -b 1 -C 32051 start

# Internal SPI bus ICM42688p with SPIX measured frequency of 32.051kHz
icm42688p -R 9 -s -b 2 -C 32051 start

# Internal SPI bus ICM42688p with SPIX measured frequency of 32.051kHz
icm42688p -R 9 -s -b 2 -C 32051 start
# Internal SPI bus ICM42688p with SPIX measured frequency of 32.051kHz
icm42688p -R 6 -s -b 3 -C 32051 start
fi

# Internal SPI bus ICM42688p with SPIX measured frequency of 32.051kHz
icm42688p -R 6 -s -b 3 -C 32051 start
if ver hwtypecmp ARKV6X000001 ARKV6X001001 ARKV6X002001 ARKV6X003001 ARKV6X004001 ARKV6X005001 ARKV6X006001 ARKV6X007001
then
# Internal SPI bus IIM42653 with SPIX measured frequency of 32.051kHz
iim42653 -R 3 -s -b 1 -C 32051 start

# Internal SPI bus IIM42653 with SPIX measured frequency of 32.051kHz
iim42653 -R 9 -s -b 2 -C 32051 start

# Internal SPI bus IIM42653 with SPIX measured frequency of 32.051kHz
iim42653 -R 6 -s -b 3 -C 32051 start
fi

# Internal magnetometer on I2C
bmm150 -I start
Expand Down
27 changes: 11 additions & 16 deletions boards/ark/fmu-v6x/src/board_config.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -211,23 +211,18 @@
#define GPIO_HW_VER_SENSE /* PH3 */ GPIO_ADC3_INP14
#define HW_INFO_INIT_PREFIX "ARKV6X"

#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2 // Rev 0 and Rev 3,4 Sensor sets
#define BOARD_NUM_SPI_CFG_HW_VERSIONS 8 // Rev 0 and Rev 1
// Base/FMUM
#define ARKV6X00 HW_VER_REV(0x0,0x0) // ARKV6X, Rev 0
#define ARKV6X01 HW_VER_REV(0x0,0x1) // ARKV6X, BMI388 I2C2 Rev 1
#define ARKV6X03 HW_VER_REV(0x0,0x3) // ARKV6X, Sensor Set Rev 3
#define ARKV6X04 HW_VER_REV(0x0,0x4) // ARKV6X, Sensor Set Rev 4
#define ARKV6X10 HW_VER_REV(0x1,0x0) // NO PX4IO, Rev 0
#define ARKV6X13 HW_VER_REV(0x1,0x3) // NO PX4IO, Sensor Set Rev 3
#define ARKV6X14 HW_VER_REV(0x1,0x4) // NO PX4IO, Sensor Set Rev 4
//#define ARKV6X40 HW_VER_REV(0x4,0x0) // ARKV6X, HB CM4 base Rev 0 // never shipped
//#define ARKV6X41 HW_VER_REV(0x4,0x1) // ARKV6X, BMI388 I2C2 HB CM4 base Rev 1 // never shipped
#define ARKV6X43 HW_VER_REV(0x4,0x3) // ARKV6X, Sensor Set HB CM4 base Rev 3
#define ARKV6X44 HW_VER_REV(0x4,0x4) // ARKV6X, Sensor Set HB CM4 base Rev 4
#define ARKV6X50 HW_VER_REV(0x5,0x0) // ARKV6X, ARKV6X Rev 0 with HB Mini Rev 5
//#define ARKV6X51 HW_VER_REV(0x5,0x1) // ARKV6X, BMI388 I2C2 HB Mini Rev 1 // never shipped
#define ARKV6X53 HW_VER_REV(0x5,0x3) // ARKV6X, Sensor Set HB Mini Rev 3
#define ARKV6X54 HW_VER_REV(0x5,0x4) // ARKV6X, Sensor Set HB Mini Rev 4
#define ARKV6X00 HW_VER_REV(0x0,0x0) // ARKV6X, Sensor Set Rev 0
#define ARKV6X01 HW_VER_REV(0x0,0x1) // ARKV6X, Sensor Set Rev 1
//#define ARKV6X03 HW_VER_REV(0x0,0x3) // ARKV6X, Sensor Set Rev 3
//#define ARKV6X04 HW_VER_REV(0x0,0x4) // ARKV6X, Sensor Set Rev 4
#define ARKV6X10 HW_VER_REV(0x1,0x0) // NO PX4IO, Sensor Set Rev 0
#define ARKV6X11 HW_VER_REV(0x1,0x1) // NO PX4IO, Sensor Set Rev 1
#define ARKV6X40 HW_VER_REV(0x4,0x0) // ARKV6X, Sensor Set Rev 0 HB CM4 base Rev 3
#define ARKV6X41 HW_VER_REV(0x4,0x1) // ARKV6X, Sensor Set Rev 1 HB CM4 base Rev 4
#define ARKV6X50 HW_VER_REV(0x5,0x0) // ARKV6X, Sensor Set Rev 0 HB Mini Rev 5
#define ARKV6X51 HW_VER_REV(0x5,0x1) // ARKV6X, Sensor Set Rev 1 HB Mini Rev 1 // never shipped

#define UAVCAN_NUM_IFACES_RUNTIME 1

Expand Down
23 changes: 8 additions & 15 deletions boards/ark/fmu-v6x/src/manifest.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -160,21 +160,14 @@ static const px4_hw_mft_item_t hw_mft_list_v0650[] = {

static px4_hw_mft_list_entry_t mft_lists[] = {
// ver_rev
{ARKV6X00, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)},
{ARKV6X01, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2
{ARKV6X03, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, Sensor Set 3
//{ARKV6X40, hw_mft_list_v0640, arraySize(hw_mft_list_v0640)}, // HB CM4 base // never shipped
//{ARKV6X41, hw_mft_list_v0640, arraySize(hw_mft_list_v0640)}, // BMP388 moved to I2C2 HB CM4 base // never shipped
{ARKV6X43, hw_mft_list_v0640, arraySize(hw_mft_list_v0640)}, // BMP388 moved to I2C2, HB CM4 base Sensor Set 3
{ARKV6X44, hw_mft_list_v0640, arraySize(hw_mft_list_v0640)}, // BMP388 moved to I2C2, HB CM4 base Sensor Set 4
{ARKV6X50, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // ARKV6X Rev 0 with HB Mini Rev 5
//{ARKV6X51, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // BMP388 moved to I2C2 HB Mini // never shipped
{ARKV6X53, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // BMP388 moved to I2C2, HB Mini Sensor Set 3
{ARKV6X54, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // BMP388 moved to I2C2, HB Mini Sensor Set 4
{ARKV6X10, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO
{ARKV6X13, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO BMP388 moved to I2C2, Sensor Set 3
{ARKV6X04, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, Sensor Set 4
{ARKV6X14, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO BMP388 moved to I2C2, Sensor Set 4
{ARKV6X00, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // ARKV6X, Sensor Set Rev 0
{ARKV6X01, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // ARKV6X, Sensor Set Rev 1
{ARKV6X10, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // NO PX4IO, Sensor Set Rev 0
{ARKV6X11, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // NO PX4IO, Sensor Set Rev 1
{ARKV6X40, hw_mft_list_v0640, arraySize(hw_mft_list_v0640)}, // ARKV6X, Sensor Set Rev 0 HB CM4 base Rev 3
{ARKV6X41, hw_mft_list_v0640, arraySize(hw_mft_list_v0640)}, // ARKV6X, Sensor Set Rev 1 HB CM4 base Rev 4
{ARKV6X50, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // ARKV6X, Sensor Set Rev 0 HB Mini Rev 5
{ARKV6X51, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // ARKV6X, Sensor Set Rev 1 HB Mini Rev 1 // never shipped
};

/************************************************************************************
Expand Down
140 changes: 139 additions & 1 deletion boards/ark/fmu-v6x/src/spi.cpp
View file
Original file line number Diff line number Diff line change
Expand Up @@ -59,7 +59,76 @@ constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSION
}),
}),

initSPIHWVersion(ARKV6X01, { // Placeholder
initSPIHWVersion(ARKV6X01, {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
}, {GPIO::PortI, GPIO::Pin11}),
initSPIBus(SPI::Bus::SPI2, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
}, {GPIO::PortF, GPIO::Pin4}),
initSPIBus(SPI::Bus::SPI3, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
}, {GPIO::PortE, GPIO::Pin7}),
// initSPIBus(SPI::Bus::SPI4, {
// // no devices
// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
// }, {GPIO::PortG, GPIO::Pin8}),
initSPIBus(SPI::Bus::SPI5, {
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
}),
initSPIBusExternal(SPI::Bus::SPI6, {
initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
}),
}),

initSPIHWVersion(ARKV6X10, {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42652, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
}, {GPIO::PortI, GPIO::Pin11}),
initSPIBus(SPI::Bus::SPI2, {
initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
}, {GPIO::PortF, GPIO::Pin4}),
initSPIBus(SPI::Bus::SPI3, {
initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
}, {GPIO::PortE, GPIO::Pin7}),
// initSPIBus(SPI::Bus::SPI4, {
// // no devices
// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
// }, {GPIO::PortG, GPIO::Pin8}),
initSPIBus(SPI::Bus::SPI5, {
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
}),
initSPIBusExternal(SPI::Bus::SPI6, {
initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
}),
}),

initSPIHWVersion(ARKV6X11, {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
}, {GPIO::PortI, GPIO::Pin11}),
initSPIBus(SPI::Bus::SPI2, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
}, {GPIO::PortF, GPIO::Pin4}),
initSPIBus(SPI::Bus::SPI3, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
}, {GPIO::PortE, GPIO::Pin7}),
// initSPIBus(SPI::Bus::SPI4, {
// // no devices
// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
// }, {GPIO::PortG, GPIO::Pin8}),
initSPIBus(SPI::Bus::SPI5, {
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
}),
initSPIBusExternal(SPI::Bus::SPI6, {
initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
}),
}),

initSPIHWVersion(ARKV6X40, {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42652, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
}, {GPIO::PortI, GPIO::Pin11}),
Expand All @@ -81,6 +150,75 @@ constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSION
initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
}),
}),

initSPIHWVersion(ARKV6X41, {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
}, {GPIO::PortI, GPIO::Pin11}),
initSPIBus(SPI::Bus::SPI2, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
}, {GPIO::PortF, GPIO::Pin4}),
initSPIBus(SPI::Bus::SPI3, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
}, {GPIO::PortE, GPIO::Pin7}),
// initSPIBus(SPI::Bus::SPI4, {
// // no devices
// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
// }, {GPIO::PortG, GPIO::Pin8}),
initSPIBus(SPI::Bus::SPI5, {
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
}),
initSPIBusExternal(SPI::Bus::SPI6, {
initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
}),
}),

initSPIHWVersion(ARKV6X50, {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42652, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
}, {GPIO::PortI, GPIO::Pin11}),
initSPIBus(SPI::Bus::SPI2, {
initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
}, {GPIO::PortF, GPIO::Pin4}),
initSPIBus(SPI::Bus::SPI3, {
initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
}, {GPIO::PortE, GPIO::Pin7}),
// initSPIBus(SPI::Bus::SPI4, {
// // no devices
// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
// }, {GPIO::PortG, GPIO::Pin8}),
initSPIBus(SPI::Bus::SPI5, {
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
}),
initSPIBusExternal(SPI::Bus::SPI6, {
initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
}),
}),

initSPIHWVersion(ARKV6X51, {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
}, {GPIO::PortI, GPIO::Pin11}),
initSPIBus(SPI::Bus::SPI2, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
}, {GPIO::PortF, GPIO::Pin4}),
initSPIBus(SPI::Bus::SPI3, {
initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
}, {GPIO::PortE, GPIO::Pin7}),
// initSPIBus(SPI::Bus::SPI4, {
// // no devices
// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
// }, {GPIO::PortG, GPIO::Pin8}),
initSPIBus(SPI::Bus::SPI5, {
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
}),
initSPIBusExternal(SPI::Bus::SPI6, {
initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
}),
}),
};

static constexpr bool unused = validateSPIConfig(px4_spi_buses_all_hw);
1 change: 1 addition & 0 deletions src/drivers/drv_sensor.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -82,6 +82,7 @@
#define DRV_IMU_DEVTYPE_IIM42652 0x2B
#define DRV_IMU_DEVTYPE_IAM20680HP 0x2C
#define DRV_IMU_DEVTYPE_ICM42686P 0x2D
#define DRV_IMU_DEVTYPE_IIM42653 0x2E

#define DRV_RNG_DEVTYPE_MB12XX 0x31
#define DRV_RNG_DEVTYPE_LL40LS 0x32
Expand Down
48 changes: 48 additions & 0 deletions src/drivers/imu/invensense/iim42653/CMakeLists.txt
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,48 @@
############################################################################
#
# Copyright (c) 2022 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
px4_add_module(
MODULE drivers__imu__invensense__iim42653
MAIN iim42653
COMPILE_FLAGS
${MAX_CUSTOM_OPT_LEVEL}
#-DDEBUG_BUILD
SRCS
iim42653_main.cpp
IIM42653.cpp
IIM42653.hpp
InvenSense_IIM42653_registers.hpp
DEPENDS
px4_work_queue
drivers_accelerometer
drivers_gyroscope
)
Loading

0 comments on commit 0914e7f

Please sign in to comment.