Merge 5.4-rc4 into android-mainline

Linux 5.4-rc4

Signed-off-by: Greg Kroah-Hartman <[email protected]>
Change-Id: I0edccd72fad8b6443b24c8c1005b66d6b8f532ce

Documentation/arm64/silicon-errata.rst

@@ -107,6 +107,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX2 SMMUv3| #126            | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX2 Core  | #219            | CAVIUM_TX2_ERRATUM_219      |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/dev-tools/kasan.rst

@@ -41,6 +41,9 @@ smaller binary while the latter is 1.1 - 2 times faster.
 Both KASAN modes work with both SLUB and SLAB memory allocators.
 For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
 
+To augment reports with last allocation and freeing stack of the physical page,
+it is recommended to enable also CONFIG_PAGE_OWNER and boot with page_owner=on.
+
 To disable instrumentation for specific files or directories, add a line
 similar to the following to the respective kernel Makefile:
 

Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt

@@ -1,8 +1,11 @@
 * Advanced Interrupt Controller (AIC)
 
 Required properties:
-- compatible: Should be "atmel,<chip>-aic"
-  <chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4"
+- compatible: Should be:
+    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
+      "sama5d3" or "sama5d4"
+    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
+
 - interrupt-controller: Identifies the node as an interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.
   The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).

Documentation/networking/device_drivers/pensando/ionic.rst

@@ -36,8 +36,10 @@ Support
 =======
 For general Linux networking support, please use the netdev mailing
 list, which is monitored by Pensando personnel::
+
   [email protected]
 
 For more specific support needs, please use the Pensando driver support
 email::
-	[email protected]
+
+  [email protected]

Documentation/networking/net_dim.txt

@@ -92,16 +92,16 @@ under some conditions.
 Part III: Registering a Network Device to DIM
 ==============================================
 
-Net DIM API exposes the main function net_dim(struct net_dim *dim,
-struct net_dim_sample end_sample). This function is the entry point to the Net
+Net DIM API exposes the main function net_dim(struct dim *dim,
+struct dim_sample end_sample). This function is the entry point to the Net
 DIM algorithm and has to be called every time the driver would like to check if
 it should change interrupt moderation parameters. The driver should provide two
-data structures: struct net_dim and struct net_dim_sample. Struct net_dim
+data structures: struct dim and struct dim_sample. Struct dim
 describes the state of DIM for a specific object (RX queue, TX queue,
 other queues, etc.). This includes the current selected profile, previous data
 samples, the callback function provided by the driver and more.
-Struct net_dim_sample describes a data sample, which will be compared to the
-data sample stored in struct net_dim in order to decide on the algorithm's next
+Struct dim_sample describes a data sample, which will be compared to the
+data sample stored in struct dim in order to decide on the algorithm's next
 step. The sample should include bytes, packets and interrupts, measured by
 the driver.
 
@@ -110,9 +110,9 @@ main net_dim() function. The recommended method is to call net_dim() on each
 interrupt. Since Net DIM has a built-in moderation and it might decide to skip
 iterations under certain conditions, there is no need to moderate the net_dim()
 calls as well. As mentioned above, the driver needs to provide an object of type
-struct net_dim to the net_dim() function call. It is advised for each entity
-using Net DIM to hold a struct net_dim as part of its data structure and use it
-as the main Net DIM API object. The struct net_dim_sample should hold the latest
+struct dim to the net_dim() function call. It is advised for each entity
+using Net DIM to hold a struct dim as part of its data structure and use it
+as the main Net DIM API object. The struct dim_sample should hold the latest
 bytes, packets and interrupts count. No need to perform any calculations, just
 include the raw data.
 
@@ -132,33 +132,33 @@ usage is not complete but it should make the outline of the usage clear.
 
 my_driver.c:
 
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 
 /* Callback for net DIM to schedule on a decision to change moderation */
 void my_driver_do_dim_work(struct work_struct *work)
 {
-	/* Get struct net_dim from struct work_struct */
-	struct net_dim *dim = container_of(work, struct net_dim,
-					   work);
+	/* Get struct dim from struct work_struct */
+	struct dim *dim = container_of(work, struct dim,
+				       work);
 	/* Do interrupt moderation related stuff */
 	...
 
 	/* Signal net DIM work is done and it should move to next iteration */
-	dim->state = NET_DIM_START_MEASURE;
+	dim->state = DIM_START_MEASURE;
 }
 
 /* My driver's interrupt handler */
 int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
 {
 	...
 	/* A struct to hold current measured data */
-	struct net_dim_sample dim_sample;
+	struct dim_sample dim_sample;
 	...
 	/* Initiate data sample struct with current data */
-	net_dim_sample(my_entity->events,
-		       my_entity->packets,
-		       my_entity->bytes,
-		       &dim_sample);
+	dim_update_sample(my_entity->events,
+		          my_entity->packets,
+		          my_entity->bytes,
+		          &dim_sample);
 	/* Call net DIM */
 	net_dim(&my_entity->dim, dim_sample);
 	...

MAINTAINERS

@@ -9122,7 +9122,7 @@ F:	drivers/auxdisplay/ks0108.c
 F:	include/linux/ks0108.h
 
 L3MDEV
-M:	David Ahern <[email protected]>
+M:	David Ahern <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	net/l3mdev
@@ -10255,7 +10255,7 @@ MEDIATEK ETHERNET DRIVER
 M:	Felix Fietkau <[email protected]>
 M:	John Crispin <[email protected]>
 M:	Sean Wang <[email protected]>
-M:	Nelson Chang <nelson.chang@mediatek.com>
+M:	Mark Lee <Mark-MC.Lee@mediatek.com>
 L:	[email protected]
 S:	Maintained
 F:	drivers/net/ethernet/mediatek/
@@ -12312,12 +12312,15 @@ F:	arch/parisc/
 F:	Documentation/parisc/
 F:	drivers/parisc/
 F:	drivers/char/agp/parisc-agp.c
+F:	drivers/input/misc/hp_sdc_rtc.c
 F:	drivers/input/serio/gscps2.c
+F:	drivers/input/serio/hp_sdc*
 F:	drivers/parport/parport_gsc.*
 F:	drivers/tty/serial/8250/8250_gsc.c
 F:	drivers/video/fbdev/sti*
 F:	drivers/video/console/sti*
 F:	drivers/video/logo/logo_parisc*
+F:	include/linux/hp_sdc.h
 
 PARMAN
 M:	Jiri Pirko <[email protected]>
@@ -13361,7 +13364,7 @@ S:	Maintained
 F:	drivers/scsi/qla1280.[ch]
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-M:	qla2xxx-upstream@qlogic.com
+M:	hmadhani@marvell.com
 L:	[email protected]
 S:	Supported
 F:	Documentation/scsi/LICENSE.qla2xxx
@@ -17430,7 +17433,7 @@ F:	include/linux/regulator/
 K:	regulator_get_optional
 
 VRF
-M:	David Ahern <[email protected]>
+M:	David Ahern <[email protected]>
 M:	Shrijeet Mukherjee <[email protected]>
 L:	[email protected]
 S:	Maintained

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Nesting Opossum
 
 # *DOCUMENTATION*
@@ -1041,7 +1041,7 @@ export KBUILD_VMLINUX_OBJS := $(head-y) $(init-y) $(core-y) $(libs-y2) \
 export KBUILD_VMLINUX_LIBS := $(libs-y1)
 export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
 export LDFLAGS_vmlinux
-# used by scripts/package/Makefile
+# used by scripts/Makefile.package
 export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) LICENSES arch include scripts tools)
 
 vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)

arch/arm/boot/dts/mt7629-rfb.dts

@@ -66,9 +66,21 @@
 	pinctrl-1 = <&ephy_leds_pins>;
 	status = "okay";
 
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	gmac1: mac@1 {
 		compatible = "mediatek,eth-mac";
 		reg = <1>;
+		phy-mode = "gmii";
 		phy-handle = <&phy0>;
 	};
 
@@ -78,7 +90,6 @@
 
 		phy0: ethernet-phy@0 {
 			reg = <0>;
-			phy-mode = "gmii";
 		};
 	};
 };

arch/arm/boot/dts/mt7629.dtsi

@@ -468,14 +468,12 @@
 			compatible = "mediatek,mt7629-sgmiisys", "syscon";
 			reg = <0x1b128000 0x3000>;
 			#clock-cells = <1>;
-			mediatek,physpeed = "2500";
 		};
 
 		sgmiisys1: syscon@1b130000 {
 			compatible = "mediatek,mt7629-sgmiisys", "syscon";
 			reg = <0x1b130000 0x3000>;
 			#clock-cells = <1>;
-			mediatek,physpeed = "2500";
 		};
 	};
 };

arch/arm64/Kconfig

@@ -616,6 +616,23 @@ config CAVIUM_ERRATUM_30115
 
 	  If unsure, say Y.
 
+config CAVIUM_TX2_ERRATUM_219
+	bool "Cavium ThunderX2 erratum 219: PRFM between TTBR change and ISB fails"
+	default y
+	help
+	  On Cavium ThunderX2, a load, store or prefetch instruction between a
+	  TTBR update and the corresponding context synchronizing operation can
+	  cause a spurious Data Abort to be delivered to any hardware thread in
+	  the CPU core.
+
+	  Work around the issue by avoiding the problematic code sequence and
+	  trapping KVM guest TTBRx_EL1 writes to EL2 when SMT is enabled. The
+	  trap handler performs the corresponding register access, skips the
+	  instruction and ensures context synchronization by virtue of the
+	  exception return.
+
+	  If unsure, say Y.
+
 config QCOM_FALKOR_ERRATUM_1003
 	bool "Falkor E1003: Incorrect translation due to ASID change"
 	default y

arch/arm64/include/asm/asm-uaccess.h

@@ -78,10 +78,9 @@ alternative_else_nop_endif
 /*
  * Remove the address tag from a virtual address, if present.
  */
-	.macro	clear_address_tag, dst, addr
-	tst	\addr, #(1 << 55)
-	bic	\dst, \addr, #(0xff << 56)
-	csel	\dst, \dst, \addr, eq
+	.macro	untagged_addr, dst, addr
+	sbfx	\dst, \addr, #0, #56
+	and	\dst, \dst, \addr
 	.endm
 
 #endif

arch/arm64/include/asm/cpucaps.h

@@ -52,7 +52,9 @@
 #define ARM64_HAS_IRQ_PRIO_MASKING		42
 #define ARM64_HAS_DCPODP			43
 #define ARM64_WORKAROUND_1463225		44
+#define ARM64_WORKAROUND_CAVIUM_TX2_219_TVM	45
+#define ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM	46
 
-#define ARM64_NCAPS				45
+#define ARM64_NCAPS				47
 
 #endif /* __ASM_CPUCAPS_H */

arch/arm64/include/asm/memory.h

@@ -215,12 +215,18 @@ static inline unsigned long kaslr_offset(void)
  * up with a tagged userland pointer. Clear the tag to get a sane pointer to
  * pass on to access_ok(), for instance.
  */
-#define untagged_addr(addr)	\
+#define __untagged_addr(addr)	\
 	((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55))
 
+#define untagged_addr(addr)	({					\
+	u64 __addr = (__force u64)addr;					\
+	__addr &= __untagged_addr(__addr);				\
+	(__force __typeof__(addr))__addr;				\
+})
+
 #ifdef CONFIG_KASAN_SW_TAGS
 #define __tag_shifted(tag)	((u64)(tag) << 56)
-#define __tag_reset(addr)	untagged_addr(addr)
+#define __tag_reset(addr)	__untagged_addr(addr)
 #define __tag_get(addr)		(__u8)((u64)(addr) >> 56)
 #else
 #define __tag_shifted(tag)	0UL

arch/arm64/include/asm/pgtable.h

@@ -876,9 +876,6 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
 
 #define update_mmu_cache_pmd(vma, address, pmd) do { } while (0)
 
-#define kc_vaddr_to_offset(v)	((v) & ~PAGE_END)
-#define kc_offset_to_vaddr(o)	((o) | PAGE_END)
-
 #ifdef CONFIG_ARM64_PA_BITS_52
 #define phys_to_ttbr(addr)	(((addr) | ((addr) >> 46)) & TTBR_BADDR_MASK_52)
 #else

arch/arm64/include/asm/sysreg.h

@@ -212,7 +212,7 @@
 #define SYS_FAR_EL1			sys_reg(3, 0, 6, 0, 0)
 #define SYS_PAR_EL1			sys_reg(3, 0, 7, 4, 0)
 
-#define SYS_PAR_EL1_F			BIT(1)
+#define SYS_PAR_EL1_F			BIT(0)
 #define SYS_PAR_EL1_FST			GENMASK(6, 1)
 
 /*** Statistical Profiling Extension ***/

arch/arm64/kernel/cpu_errata.c

@@ -12,6 +12,7 @@
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/cpufeature.h>
+#include <asm/smp_plat.h>
 
 static bool __maybe_unused
 is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope)
@@ -623,6 +624,30 @@ check_branch_predictor(const struct arm64_cpu_capabilities *entry, int scope)
 	return (need_wa > 0);
 }
 
+static const __maybe_unused struct midr_range tx2_family_cpus[] = {
+	MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN),
+	MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2),
+	{},
+};
+
+static bool __maybe_unused
+needs_tx2_tvm_workaround(const struct arm64_cpu_capabilities *entry,
+			 int scope)
+{
+	int i;
+
+	if (!is_affected_midr_range_list(entry, scope) ||
+	    !is_hyp_mode_available())
+		return false;
+
+	for_each_possible_cpu(i) {
+		if (MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0) != 0)
+			return true;
+	}
+
+	return false;
+}
+
 #ifdef CONFIG_HARDEN_EL2_VECTORS
 
 static const struct midr_range arm64_harden_el2_vectors[] = {
@@ -851,6 +876,19 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = has_cortex_a76_erratum_1463225,
 	},
+#endif
+#ifdef CONFIG_CAVIUM_TX2_ERRATUM_219
+	{
+		.desc = "Cavium ThunderX2 erratum 219 (KVM guest sysreg trapping)",
+		.capability = ARM64_WORKAROUND_CAVIUM_TX2_219_TVM,
+		ERRATA_MIDR_RANGE_LIST(tx2_family_cpus),
+		.matches = needs_tx2_tvm_workaround,
+	},
+	{
+		.desc = "Cavium ThunderX2 erratum 219 (PRFM removal)",
+		.capability = ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM,
+		ERRATA_MIDR_RANGE_LIST(tx2_family_cpus),
+	},
 #endif
 	{
 	}