Auto bed levelling issue

[meggerja]

Hello, I've got a problem I thing with this auto bed levelling function. I have BLtoutch sensor and no mater what I do the ABL is not probing twice for every point, it does ok two probes for the middle Z offset only. Second fault is maybe not necessary the code but I can't find any other reason: I can level the bed manually and print ok then but if I run the ABL then my printer has false correction on X axis, it is lifting the nozzle at X0-X10 about 0.2 higher than X200-X210. I've got a different sensor offset position (X=0, Y=-25, Z=-3.7) witch I set in the config file but I don't think it should be a problem.
elegoo.txt

[NARUTOfzr]

Don't know where you installed bltouch? Can you take a picture to see?

…

---Original--- From: ***@***.***> Date: Fri, Apr 14, 2023 20:27 PM To: ***@***.***>; Cc: ***@***.***>; Subject: [NARUTOfzr/ZNP-Robin-Nano-V1.2-V1.3] Auto bed levelling issue (Issue#12) Hello, I've got a problem I thing with this auto bed levelling function. I have BLtoutch sensor and no mater what I do the ABL is not probing twice for every point, it does ok two probes for the middle Z offset only. Second fault is maybe not necessary the code but I can't find any other reason: I can level the bed manually and print ok then but if I run the ABL then my printer has false correction on X axis, it is lifting the nozzle at X0-X10 about 0.2 higher than X200-X210. I've got a different sensor offset position (Y=0, X=-25, Z=-3.7) witch I set in the config file but I don't think it should be a problem. elegoo.txt — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[meggerja]

It is from this project:
https://www.printables.com/model/284757-elegoo-neptune-2-2s-2d-fan-upgrade-w-bl-touch

[meggerja]

Just watched another video on YT and spotted the probing is only once per spot, so this is actually not a fault. My mistake

[NARUTOfzr]

Yes, each point is only probed once. I made some changes. This should improve.

1-elegoo.txt