Skip to content

ZNP Robin Nano v1.2 is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support ZNP Robin TFT35 V1.0 touch Screens. The mainboard integrates 5 AXIS interface, hot bed, heating head, 3 NTC100K, 1 MAX31855.The motherboard integrates After shutdown. Support MKS Robin WIFI for cloud printing and supports firmware upd…

Notifications You must be signed in to change notification settings

NARUTOfzr/ZNP-Robin-Nano-V1.2-V1.3

Repository files navigation

Neptune2&2S&2D firmware file

描述

ZNP-Robin-Nano-V1.2 & ZNP-Robin-Nano-V1.3

ZNP Robin Nano v1.2 & V1.3 is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support ZNP Robin TFT35 V1.0 touch Screens. The mainboard integrates 5 AXIS interface, hot bed, heating head, 3 NTC100K. Support Robin WIFI for cloud printing and supports firmware update by SD card…

About ZNP-Robin-Nano V1.2 & V1.3

The differences between ZNP Robin Nano V1.2 and ZNP Robin Nano V1.3 are as follow:

————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
                        ZNP Robin Nano V1.2                                   ZNP Robin Nano V1.3            
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Firmware support        ZNP Robin Nano V1.2 Firmware/Above Marlin2.0.6        ZNP Robin Nano V1.3 Firmware/Above Marlin2.0.6    
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
LCD Type and Interface  ZNP Robin TFT35(FSMC)                                 ZNP Robin TFT35(FSMC)    
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Rotary Encoder          Not support                                           Not support  
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Motor Driver mode       STEP/DIR                                              STEP/DIR   
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
On board EEPROM         2KB                                                   4KB                          
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

Compare between ZNP Robin Nano V1.2 & V1.3

ITEMS ZNP Robin Nano V1.2 ZNP Robin Nano V1.3
MCU STM32F103VET6(72MHz) STM32F407VET6(168MHz)
FLASH/RAM 512KB FLASH/64KB RAM 512KB FLASH/192KB RAM
Drivers 2 TMC2225 standard mode + 2 A4988 + 1 Pluggable 2 TMC2225 standard mode + 2 A4988 + 1 Pluggable
Firmware offset 7000 8000

Firmware version description

  • Please check the model version marked on the motherboard to confirm the motherboard model and the required firmware.

ZNP_Robin_Nano_V1.2 Firmware

  • V1.0.4

ZNP_Robin_Nano_V1.3 Firmware

  • V2.0.2

Note

  • Thank you for using ELEGOO products. If you have any questions during use, please contact us in time and we will work with you to solve it.

About

ZNP Robin Nano v1.2 is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support ZNP Robin TFT35 V1.0 touch Screens. The mainboard integrates 5 AXIS interface, hot bed, heating head, 3 NTC100K, 1 MAX31855.The motherboard integrates After shutdown. Support MKS Robin WIFI for cloud printing and supports firmware upd…

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published