This is replaced by the more up to date and more complete https://github.com/marcmerlin/ArduinoOnPc-FastLED-GFX-LEDMatrix
With this software you can run an Arduino Sketch on your PC and is specifically designed to test code written for any of:
- https://github.com/marcmerlin/Framebuffer_GFX (base class)
- https://github.com/pixelmatix/SmartMatrix
- https://github.com/adafruit/Adafruit-GFX-Library
- https://github.com/FastLED/FastLED
- https://github.com/marcmerlin/LEDMatrix
using SDL on Linux
If you have run code that runs on any of:
- https://github.com/marcmerlin/FastLED_NeoMatrix/
- https://github.com/marcmerlin/SmartMatrix_GFX/
- https://github.com/marcmerlin/FastLED_SPITFT_GFX (SSD1331, ILI9341, and ST7735 TFTs)
it can then run with this linux/SDL backend too.
Ben's original answer:
It takes three weeks to ship a serial LED strip from China, but I want to start coding animations now!
Marc's new answer:
- Complicated code can take a while to write and debug, and it's just much faster on a PC than actual hardware.
- It also makes it easier to test code to see whether it works on resolutions like 320x240 if you don't have capable hardware like ILI9341 supported by https://github.com/marcmerlin/FastLED_SPITFT_GFX
- You can work on your demo code while travelling and without having to carry bigger matrix displays
If you are using Arduino Make, it should be sufficient to
replace the Arduino.mk include with makeNativeArduino.mk in your Makefile.
Then simply run make as usual.
This uses a patched version of FastLED which outputs to a SDL buffer instead of real hardware.
If things appear too dark, use the + key to increase brightness.
See the example/ directory for examples.
If you use FastLED_NeoMatrix_SmartMatrix_LEDMatrix_GFX_Demos, you can simply use neomatrix_config.h and it will set everything up for you.
If you want to do it manually like in example/hello_world:
FastLED.addLeds<WS2812B, DATA_PIN>(leds, num_leds); # before
FastLED.addLeds<SDL, width, height>(leds, num_leds); # after
The Layout for NeoMatrix is NEO_MATRIX_TOP + NEO_MATRIX_LEFT + NEO_MATRIX_ROWS (no ZIGZAG as you would want on real hardware).
SDL is used to render a simulation of the LED-Strip Matrix. To install the required dependencies, run
sudo apt install libsdl2-dev
The project uses git submodules to include the Arduino libraries. To get them, you have to run
git submodule init
git submodule update
after checking out the repository.