EBB36 Mounts for Dragon Burner

Mounts for the BTT EBB36 with Dragon Burner and Rapid Burner toolheads.

Compatibility

These mounts are suitable for use on V0 and Printers for Ants that include 2 mounting points at the rear of the X carriage. They do not currently work with Boop, Tap, or any other X-carriage without these.

Spacers!

Every extruder requires different length spacers, the lengths are documented here, but (for now?) no STL's for them are provided. Find your favourite one and scale it.

Printing

Use standard Voron settings, 0.2mm layers, 4 walls, 5 top, 5 bottom, 40% infill.

Remove the support bridge before installing the PCB

Install 2 M3x5x4 Heat-set inserts from the back

Extruders

The following extruders are currently supported:

Sherpa Mini

https://github.com/Annex-Engineering/Sherpa_Mini-Extruder/

• 22.35mm Spacers x2

Sharkfin

https://github.com/KayosMaker/Sharkfin_Extruder/

• 21.3mm Spacers x2

Orbiter 1.5

https://www.orbiterprojects.com/orbiter-1-5/

• 18.05mm Spacers x2
• 12mm Spacers x2

Orbiter 2

https://www.orbiterprojects.com/orbiter-v2-0/

• 18.54mm Spacers x2

Wristwatch-BMG

• 21.35mm Spacers x2

Galileo 2 Standalone (G2SA)

https://github.com/JaredC01/Galileo2/tree/main/galileo2_standalone

• 17.6mm Spacers x2
• 4mm Spacers x2

VZ-HextrudORT (CNC)

https://github.com/VzBoT3D/Vz-HextrudORT

• 22.65mm Spacers x2

LGX Lite

https://www.bondtech.se/product/lgx-lite-large-gears-extruder/

• 20.85mm Spacers x2
• 4mm Spacers x2