MPX VORON 2.4 CNC PARTS

Important:

Please follow the following instruction when installing the Z tensioner & Z idler.

1. screw up the Z tensioner block into the frame softly and make sure the Z idler is free to move up and down.
2. install the gantry and connect the z belts.
3. adjust the z belt length.
4. adjust the z belt tension until it is good.
5. tighten the screw on step 1.

Printed Parts Need:

The kit does not include the following parts:

1. Afterburner/Stealthburner and extruder.
2. XY endstop on XY joint

You will have to use the same printed part from a standard Voron 2.4.

This part is used to mount z chain so you may need to print it by yourself.

https://github.com/MagicPhoenix/MPX-VORON-24-CNC/blob/main/STLs/Z_Chain_Mount_3_Hole.stl

Tips:

1.The M3x36 screw on the AB Idler might be not fit into the part. To fix it, you can either shorten it from the end for 0.5-1mm, or simply replace it with a M3x35mm screw on your hand.