Welcome to the Vortex Gloves Git hub page!

I'm not an expert so help is always welcome, but I'll do my best to help you get started! Best of luck to all of us!

Installation

In order to get started first you'll need to set up Arduino IDE Download the latest version of the program for your operating system here https://www.arduino.cc/en/software

Setup

Next we'll need to configure Arduino to work with our hardware! The board we're using is called the Trinket m0 by Adafruit, and they have a fantastic guide on how to set up Arduino to support it. Just make sure to use the reccomended board versions below. https://learn.adafruit.com/adafruit-trinket-m0-circuitpython-arduino/arduino-ide-setup

Arduino SAMD Boards(32-bits ARM Cortex-M0+) v1.6.20

Adafruit SAMD Boards v1.5.14

The latest versions don't work with one of our libraries so you'll get errors if you don't use the ones listed above.

Library Setup

Lastly we need to copy the libraries folder to the directory C:\Users\YourPCName\Documents\Arduino This should give arduino everything it needs to work with the Vortex Gloves! Make sure to exit all Arduino IDE windows and restart the program to finalize the installation!

Mode Lists

List 1 -red-

Strobe

HyperStrobe

Dops

dopish

UltraDops

Strobie

Blinkie

Ghost Crush

Dash dops

Ribbon

Mini Ribbon

All Tracer

Blend

Brackets

List 2 -yellow-

Theater Chase

Zig Zag

Zip Fade

Tip Top

Drip

Drip Morph

Cross dops

Double Strobe

Sloth Strobe

Meteor Fingers

Sparkle Trace

List 3 -green-

Vortex Wipe

Vortex Wipe

Warp

Warp Worm

Snowball Warp

Lighthouse

Pulsish

Fill

Bounce

List 4 -blue-

Impact

Rabbit

SplitStrobe

Backstrobe

Flower/Clusters

Jestival

Materia

List 5 -purple-

-Empty-