pwm_tool: WIP - draft support for maximum_mcu_duration

Signed-off-by: Kevin O'Connor <[email protected]>

docs/Config_Reference.md

@@ -3141,6 +3141,7 @@ pin:
 #   The pin to configure as an output. This parameter must be provided.
 #value:
 #shutdown_value:
+#maximum_mcu_duration:
 #cycle_time: 0.100
 #hardware_pwm: False
 #scale:

klippy/extras/pwm_tool.py

@@ -6,6 +6,7 @@
 import chelper
 
 PIN_MIN_TIME = 0.100
+RESEND_HOST_TIME = 0.300 + PIN_MIN_TIME
 MAX_SCHEDULE_TIME = 5.0
 
 class error(Exception):
@@ -121,7 +122,16 @@ def __init__(self, config):
         self.mcu_pin.setup_cycle_time(cycle_time, hardware_pwm)
         self.scale = config.getfloat('scale', 1., above=0.)
         self.last_print_time = 0.
-        self.mcu_pin.setup_max_duration(0.)
+        # Support mcu checking for maximum duration
+        self.reactor = self.printer.get_reactor()
+        self.resend_timer = None
+        self.resend_interval = 0.
+        max_mcu_duration = config.getfloat('maximum_mcu_duration', 0.,
+                                           minval=0.500,
+                                           maxval=MAX_SCHEDULE_TIME)
+        self.mcu_pin.setup_max_duration(max_mcu_duration)
+        if max_mcu_duration:
+            self.resend_interval = max_mcu_duration - RESEND_HOST_TIME
         # Determine start and shutdown values
         self.last_value = config.getfloat(
             'value', 0., minval=0., maxval=self.scale) / self.scale
@@ -136,13 +146,18 @@ def __init__(self, config):
                                    desc=self.cmd_SET_PIN_help)
     def get_status(self, eventtime):
         return {'value': self.last_value}
-    def _set_pin(self, print_time, value):
-        if value == self.last_value:
+    def _set_pin(self, print_time, value, is_resend=False):
+        if value == self.last_value and not is_resend:
             return
         print_time = max(print_time, self.last_print_time)
         self.mcu_pin.set_pwm(print_time, value)
         self.last_value = value
         self.last_print_time = print_time
+        if self.resend_interval and self.resend_timer is None:
+            self.resend_timer = self.reactor.register_timer(
+                self._resend_current_val, self.reactor.NOW)
+        toolhead = self.printer.lookup_object('toolhead')
+        toolhead.note_move_queue_activity(print_time)
     cmd_SET_PIN_help = "Set the value of an output pin"
     def cmd_SET_PIN(self, gcmd):
         # Read requested value
@@ -152,6 +167,20 @@ def cmd_SET_PIN(self, gcmd):
         toolhead = self.printer.lookup_object('toolhead')
         toolhead.register_lookahead_callback(
             lambda print_time: self._set_pin(print_time, value))
+    def _resend_current_val(self, eventtime):
+        if self.last_value == self.shutdown_value:
+            self.reactor.unregister_timer(self.resend_timer)
+            self.resend_timer = None
+            return self.reactor.NEVER
+
+        systime = self.reactor.monotonic()
+        print_time = self.mcu_pin.get_mcu().estimated_print_time(systime)
+        time_diff = (self.last_print_time + self.resend_interval) - print_time
+        if time_diff > 0.:
+            # Reschedule for resend time
+            return systime + time_diff
+        self._set_pin(print_time + PIN_MIN_TIME, self.last_value, True)
+        return systime + self.resend_interval
 
 def load_config_prefix(config):
     return PrinterOutputPin(config)

klippy/toolhead.py

@@ -543,6 +543,14 @@ def register_lookahead_callback(self, callback):
         last_move.timing_callbacks.append(callback)
     def note_kinematic_activity(self, kin_time):
         self.last_kin_move_time = max(self.last_kin_move_time, kin_time)
+    def note_move_queue_activity(self, mq_time):
+        if self.special_queuing_state == "Flushed":
+            # Must manually flush move queue buffers
+            for m in self.all_mcus:
+                m.flush_moves(mq_time)
+        else:
+            # Move queue will get flushed via regular toolhead flushing
+            self.last_kin_move_time = max(self.last_kin_move_time, mq_time)
     def get_max_velocity(self):
         return self.max_velocity, self.max_accel
     def _calc_junction_deviation(self):