Added 'tool' module to control PWM-tools like lasers or spindles via …

…M3-M5

Signed-off-by: Pascal Pieper <[email protected]>

docs/Tool.md

@@ -0,0 +1,38 @@
+This document describes the _tool_ module.
+
+
+## How does it work?
+This enables the use of _M3 M4 M5_ GCODE commands.
+It is based on the generic fan PWM module, but adds a shutdown value
+and makes use of the MCU's safety timeout.
+
+## Configuration
+	[tool]
+	pin: !ar9
+
+	hardware_pwm: True
+	# Default: True
+
+	cycle_time: 0.001
+	# Default: 0.01
+
+	max_power: 1
+	# Default: 1
+
+	off_below: 0
+	# Default: 0
+
+	shutdown_value: 0
+	# Default: 0
+
+	safety_timeout: 20
+	# Default: 0 (disabled)
+	# Suggested value is a minimal amount longer
+	# than the longest running command.
+	# Currently, moves are not split into individual sections.
+
+
+## Commands
+
+`M3/M4 S<value>` : Set PWM duty-cycle. Values between 0 and 255.
+`M5` : Stop PWM output to shutdown value.

klippy/extras/tool.py

@@ -0,0 +1,86 @@
+# Printer cooling fan
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+
+class PWM_tool:
+    def __init__(self, config, default_shutdown_value=0.):
+        self.printer = config.get_printer()
+        self.last_value = 0.
+        self.last_time = 0.
+        self.safety_timeout = config.getfloat('safety_timeout', 5,
+                                                minval=0.)
+        self.reactor = self.printer.get_reactor()
+        self.resend_timer = self.reactor.register_timer(
+            self._resend_current_val)
+        # Read config
+        self.max_value = config.getfloat('max_power', 1., above=0., maxval=1.)
+        self.off_below = config.getfloat('off_below', default=0.,
+                                         minval=0., maxval=1.)
+        cycle_time = config.getfloat('cycle_time', 0.01, above=0.)
+        hardware_pwm = config.getboolean('hardware_pwm', True)
+        shutdown_value = config.getfloat(
+            'shutdown_value', default_shutdown_value, minval=0., maxval=1.)
+        # Setup pwm object
+        ppins = self.printer.lookup_object('pins')
+        self.mcu_pwm = ppins.setup_pin('pwm', config.get('pin'))
+        self.mcu_pwm.setup_max_duration(self.safety_timeout)
+        self.mcu_pwm.setup_cycle_time(cycle_time, hardware_pwm)
+        self.shutdown_value = max(0., min(self.max_value, shutdown_value))
+        self.mcu_pwm.setup_start_value(0., shutdown_value)
+        # Register callbacks
+        self.printer.register_event_handler("gcode:request_restart",
+                                            self._handle_request_restart)
+    def get_mcu(self):
+        return self.mcu_pwm.get_mcu()
+    def set_value(self, print_time, value, resend=False):
+        if value < self.off_below:
+            value = 0.
+        value = max(0., min(self.max_value, value * self.max_value))
+        if value == self.last_value and not resend:
+            return
+        print_time = max(self.last_time, print_time)
+        self.last_time = print_time
+        self.last_value = value
+        self.mcu_pwm.set_pwm(print_time, value)
+        if self.safety_timeout != 0 and not resend:
+            if value != self.shutdown_value:
+                self.reactor.update_timer(
+                    self.resend_timer,
+                    self.reactor.monotonic() + 0.75 * self.safety_timeout)
+    def set_value_from_command(self, value):
+        toolhead = self.printer.lookup_object('toolhead')
+        toolhead.register_lookahead_callback((lambda pt:
+                                              self.set_value(pt, value)))
+    def _handle_request_restart(self, print_time):
+        self.set_value(print_time, 0.)
+    def get_status(self, eventtime):
+        return {'value': self.last_value}
+    def _resend_current_val(self, eventtime):
+        # TODO: Split moves into smaller segments to enforce resend
+        toolhead = self.printer.lookup_object('toolhead')
+        toolhead.register_lookahead_callback((lambda pt:
+                              self.set_value(pt, self.last_value, True)))
+        if self.last_value != self.shutdown_value:
+            return eventtime + 0.75 * self.safety_timeout
+        return self.reactor.NEVER
+
+class PrinterSpindle:
+    def __init__(self, config):
+        self.tool = PWM_tool(config)
+        # Register commands
+        gcode = config.get_printer().lookup_object('gcode')
+        gcode.register_command("M3", self.cmd_M3_M4)
+        gcode.register_command("M4", self.cmd_M3_M4)
+        gcode.register_command("M5", self.cmd_M5)
+    def get_status(self, eventtime):
+        return self.tool.get_status(eventtime)
+    def cmd_M3_M4(self, gcmd):
+        # Set spindle speed
+        value = gcmd.get_float('S', 255., minval=0.) / 255.
+        self.tool.set_value_from_command(value)
+    def cmd_M5(self, gcmd):
+        # Turn spindle off
+        self.tool.set_value_from_command(0.)
+
+def load_config(config):
+    return PrinterSpindle(config)