docs: Update Measuring_Resonances.md (#6509) (#245)

Current command, using the *, results in bad chart output when more than one .csv file exists in the tmp folder. This isn't obvious for people who may not know that the * is a wildcard character. Signed-off-by: Jonathan Williams <[email protected]> Co-authored-by: charminULTRA <[email protected]>
KalicoCrew · May 15, 2024 · d9b1ede · d9b1ede
1 parent ffa084b
commit d9b1ede
Showing 1 changed file with 5 additions and 1 deletion.
diff --git a/docs/Measuring_Resonances.md b/docs/Measuring_Resonances.md
@@ -450,7 +450,11 @@ TEST_RESONANCES AXIS=Y
 ```
 This will generate 2 CSV files (`/tmp/resonances_x_*.csv` and
 `/tmp/resonances_y_*.csv`). These files can be processed with the stand-alone
-script on a Raspberry Pi. To do that, run the following commands:
+script on a Raspberry Pi. This script is intended to be run with a single CSV
+file for each axis measured, although it can be used with multiple CSV files
+if you desire to average the results. Averaging results can be useful, for
+example, if resonance tests were done at multiple test points. Delete the extra
+CSV files if you do not desire to average them.
 ```
 ~/klipper/scripts/calibrate_shaper.py /tmp/resonances_x_*.csv -o /tmp/shaper_calibrate_x.png
 ~/klipper/scripts/calibrate_shaper.py /tmp/resonances_y_*.csv -o /tmp/shaper_calibrate_y.png