fix all static references to docs

KalicoCrew · Dec 23, 2024 · d735acf · d735acf
1 parent 05078a1
commit d735acf
Show file tree

Hide file tree

Showing 222 changed files with 256 additions and 256 deletions.
diff --git a/README.md b/README.md
@@ -128,8 +128,8 @@ See the [Danger Features document](https://docs.kalico.gg/Danger_Features.html)
 
 - [danger_options: configurable homing constants](https://github.com/KalicoCrew/kalico/pull/378)
 
-If you're feeling adventurous, take a peek at the extra features in the bleeding-edge-v2 branch [feature documentation](docs/Bleeding_Edge.md)
-and [feature configuration reference](docs/Config_Reference_Bleeding_Edge.md):
+If you're feeling adventurous, take a peek at the extra features in the bleeding-edge-v2 branch [feature documentation](docs/src/Bleeding_Edge.md)
+and [feature configuration reference](docs/src/Config_Reference_Bleeding_Edge.md):
 
 - [extruder/pa: do not smooth base extruder position, only advance](https://github.com/KalicoCrew/kalico/pull/266)
 

diff --git a/config/example-cartesian.cfg b/config/example-cartesian.cfg
@@ -5,7 +5,7 @@
 # DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
 # FIRST. Incorrectly configured parameters may cause damage.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PF0

diff --git a/config/example-corexy.cfg b/config/example-corexy.cfg
@@ -5,7 +5,7 @@
 # DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
 # FIRST. Incorrectly configured parameters may cause damage.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PF0

diff --git a/config/example-corexz.cfg b/config/example-corexz.cfg
@@ -4,7 +4,7 @@
 # DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
 # FIRST. Incorrectly configured parameters may cause damage.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PF0

diff --git a/config/example-delta.cfg b/config/example-delta.cfg
@@ -4,7 +4,7 @@
 # DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
 # FIRST. Incorrectly configured parameters may cause damage.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_a]
 step_pin: PF0

diff --git a/config/example-deltesian.cfg b/config/example-deltesian.cfg
@@ -5,7 +5,7 @@
 # DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
 # FIRST. Incorrectly configured parameters may cause damage.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_left]
 step_pin: PF0

diff --git a/config/example-extras.cfg b/config/example-extras.cfg
@@ -1,4 +1,4 @@
-# Documentation on config parameters has moved to: docs/Config_Reference.md
+# Documentation on config parameters has moved to: docs/src/Config_Reference.md
 
 # The latest version of the config reference is also available online at:
 #   https://www.klipper3d.org/Config_Reference.html
diff --git a/config/example-hybrid-corexy.cfg b/config/example-hybrid-corexy.cfg
@@ -5,7 +5,7 @@
 # DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
 # FIRST. Incorrectly configured parameters may cause damage.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PF0

diff --git a/config/example-hybrid-corexz.cfg b/config/example-hybrid-corexz.cfg
@@ -5,7 +5,7 @@
 # DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
 # FIRST. Incorrectly configured parameters may cause damage.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PF0

diff --git a/config/example-polar.cfg b/config/example-polar.cfg
@@ -4,7 +4,7 @@
 # POLAR KINEMATICS ARE A WORK IN PROGRESS. Moves around the 0, 0
 # position are known to not work properly.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_bed]
 step_pin: PF0

diff --git a/config/example-rotary-delta.cfg b/config/example-rotary-delta.cfg
@@ -4,7 +4,7 @@
 # ROTARY DELTA KINEMATICS ARE A WORK IN PROGRESS. Homing moves may
 # timeout and some boundary checks are not implemented.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_a]
 step_pin: PF0

diff --git a/config/example-winch.cfg b/config/example-winch.cfg
@@ -8,7 +8,7 @@
 # home the printer, manually send movement commands until the toolhead
 # is at 0, 0, 0 and then issue a G28 command.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_a]
 step_pin: PF0

diff --git a/config/example.cfg b/config/example.cfg
@@ -1,4 +1,4 @@
-# Documentation on config parameters has moved to: docs/Config_Reference.md
+# Documentation on config parameters has moved to: docs/src/Config_Reference.md
 
 # The latest version of the config reference is also available online at:
 #   https://www.klipper3d.org/Config_Reference.html
diff --git a/config/generic-I3DBEEZ9.cfg b/config/generic-I3DBEEZ9.cfg
@@ -7,7 +7,7 @@
 # file named "firmware.bin" on an SD card and then restart the I3DBEEZ9
 # with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PE9

diff --git a/config/generic-alligator-r2.cfg b/config/generic-alligator-r2.cfg
@@ -8,7 +8,7 @@
 # See alligator github for alligator manager:
 # https://github.com/3Dartists/alligator-manager
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [static_digital_output DRV8825_microstepping]
 pins:PC10

diff --git a/config/generic-alligator-r3.cfg b/config/generic-alligator-r3.cfg
@@ -8,7 +8,7 @@
 # See alligator github for alligator manager:
 # https://github.com/3Dartists/alligator-manager
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [static_digital_output DRV8825_microstepping]
 pins:PC10

diff --git a/config/generic-archim2.cfg b/config/generic-archim2.cfg
@@ -2,7 +2,7 @@
 # boards. To use this config, the firmware should be compiled for the
 # SAM3x8e.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PC6

diff --git a/config/generic-azteeg-x5-mini-v3.cfg b/config/generic-azteeg-x5-mini-v3.cfg
@@ -1,7 +1,7 @@
 # This file contains common pin mappings for the Azteeg X5 Mini v3. To use
 # this config, the firmware should be compiled for the LPC1769.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: P2.1

diff --git a/config/generic-bigtreetech-e3-rrf-v1.1.cfg b/config/generic-bigtreetech-e3-rrf-v1.1.cfg
@@ -7,7 +7,7 @@
 # file named "firmware.bin" on an SD card and then restart the E3 RRF
 # 1.1 with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PD5

diff --git a/config/generic-bigtreetech-gtr.cfg b/config/generic-bigtreetech-gtr.cfg
@@ -7,7 +7,7 @@
 # file named "firmware.bin" on an SD card and then restart the GTR
 # with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PC15

diff --git a/config/generic-bigtreetech-manta-e3ez.cfg b/config/generic-bigtreetech-manta-e3ez.cfg
@@ -3,7 +3,7 @@
 # STM32G0B1 with a "8KiB bootloader" "8 MHz crystal"
 # and "USB (on PA11/PA12)" or "CAN bus (on PB12/PB13)".
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PA14

diff --git a/config/generic-bigtreetech-manta-m4p.cfg b/config/generic-bigtreetech-manta-m4p.cfg
@@ -2,7 +2,7 @@
 # To use this config, the firmware should be compiled for the
 # STM32G0B1 with a "8KiB bootloader" and USB communication.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PC6

diff --git a/config/generic-bigtreetech-manta-m5p.cfg b/config/generic-bigtreetech-manta-m5p.cfg
@@ -3,7 +3,7 @@
 # STM32G0B1 with a "8KiB bootloader" "8 MHz crystal"
 # and "USB (on PA11/PA12)" or "CAN bus (on PD0/PD1)".
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PC8

diff --git a/config/generic-bigtreetech-manta-m8p-v1.0.cfg b/config/generic-bigtreetech-manta-m8p-v1.0.cfg
@@ -2,7 +2,7 @@
 # To use this config, the firmware should be compiled for the
 # STM32G0B1 with a "8KiB bootloader" and USB communication.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PE2

diff --git a/config/generic-bigtreetech-manta-m8p-v1.1.cfg b/config/generic-bigtreetech-manta-m8p-v1.1.cfg
@@ -3,7 +3,7 @@
 # STM32G0B1 with a "8KiB bootloader" "8 MHz crystal"
 # and "USB (on PA11/PA12)" or "CAN bus (on PD12/PD13)".
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PE2

diff --git a/config/generic-bigtreetech-octopus-max-ez.cfg b/config/generic-bigtreetech-octopus-max-ez.cfg
@@ -3,7 +3,7 @@
 # STM32H723 with a "128KiB bootloader" "25 MHz crystal"
 # and "USB (on PA11/PA12)" or "CAN bus (on PD0/PD1)".
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 # Motor-1
 [stepper_x]

diff --git a/config/generic-bigtreetech-octopus-pro-v1.0.cfg b/config/generic-bigtreetech-octopus-pro-v1.0.cfg
@@ -13,7 +13,7 @@
 # bootloader" and an "8MHz crystal". For STM32H723 boards use a
 # "128KiB bootloader" and a "25Mhz crystal".
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 # Driver0
 [stepper_x]

diff --git a/config/generic-bigtreetech-octopus-pro-v1.1.cfg b/config/generic-bigtreetech-octopus-pro-v1.1.cfg
@@ -9,7 +9,7 @@
 # micro-controller, select a "128KiB bootloader", and select a "25Mhz
 # crystal".
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 # Driver0
 [stepper_x]

diff --git a/config/generic-bigtreetech-octopus-v1.1.cfg b/config/generic-bigtreetech-octopus-v1.1.cfg
@@ -12,7 +12,7 @@
 # clock reference. For STM32F429 boards use a "32KiB bootloader" and
 # an "8MHz crystal".
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 # Driver0
 [stepper_x]

diff --git a/config/generic-bigtreetech-skr-2.cfg b/config/generic-bigtreetech-skr-2.cfg
@@ -11,7 +11,7 @@
 # file named "firmware.bin" on an SD card and then restart the SKR 2
 # with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 # Note: The initial revision of this board has a flaw that can cause
 # damage to itself and other boards. Be sure to verify the board is

diff --git a/config/generic-bigtreetech-skr-3.cfg b/config/generic-bigtreetech-skr-3.cfg
@@ -4,7 +4,7 @@
 # options", "STM32H743" or "STM32H723", "128KiB bootloader",
 # and "25MHz clock".
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PD4

diff --git a/config/generic-bigtreetech-skr-cr6-v1.0.cfg b/config/generic-bigtreetech-skr-cr6-v1.0.cfg
@@ -9,7 +9,7 @@
 # file named "firmware.bin" on an SD card and then restart the SKR
 # CR6 V1.0 with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PB13

diff --git a/config/generic-bigtreetech-skr-e3-dip.cfg b/config/generic-bigtreetech-skr-e3-dip.cfg
@@ -9,7 +9,7 @@
 # file named "firmware.bin" on an SD card and then restart the SKR E3
 # DIP with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 # Note: This board has a design flaw in its thermistor circuits that
 # cause inaccurate temperatures (most noticeable at low temperatures).

diff --git a/config/generic-bigtreetech-skr-e3-turbo.cfg b/config/generic-bigtreetech-skr-e3-turbo.cfg
@@ -2,7 +2,7 @@
 # Turbo. To use this config, the firmware should be compiled for the
 # LPC1769.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: P1.4

diff --git a/config/generic-bigtreetech-skr-mini-e3-v1.0.cfg b/config/generic-bigtreetech-skr-mini-e3-v1.0.cfg
@@ -9,7 +9,7 @@
 # file named "firmware.bin" on an SD card and then restart the SKR
 # mini E3 with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 # Note: This board has a design flaw in its thermistor circuits that
 # cause inaccurate temperatures (most noticeable at low temperatures).

diff --git a/config/generic-bigtreetech-skr-mini-e3-v1.2.cfg b/config/generic-bigtreetech-skr-mini-e3-v1.2.cfg
@@ -9,7 +9,7 @@
 # file named "firmware.bin" on an SD card and then restart the SKR
 # mini E3 with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 # Note: This board has a design flaw in its thermistor circuits that
 # cause inaccurate temperatures (most noticeable at low temperatures).

diff --git a/config/generic-bigtreetech-skr-mini-e3-v2.0.cfg b/config/generic-bigtreetech-skr-mini-e3-v2.0.cfg
@@ -9,7 +9,7 @@
 # file named "firmware.bin" on an SD card and then restart the SKR
 # mini E3 with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PB13

diff --git a/config/generic-bigtreetech-skr-mini-e3-v3.0.cfg b/config/generic-bigtreetech-skr-mini-e3-v3.0.cfg
@@ -7,7 +7,7 @@
 # file named "firmware.bin" on an SD card and then restart the SKR
 # mini E3 with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PB13

diff --git a/config/generic-bigtreetech-skr-mini-mz.cfg b/config/generic-bigtreetech-skr-mini-mz.cfg
@@ -9,7 +9,7 @@
 # file named "firmware.bin" on an SD card and then restart the SKR
 # mini MZ with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 # Note: This board has a design flaw in its thermistor circuits that
 # cause inaccurate temperatures (most noticeable at low temperatures).

diff --git a/config/generic-bigtreetech-skr-mini.cfg b/config/generic-bigtreetech-skr-mini.cfg
@@ -7,7 +7,7 @@
 # file named "firmware.bin" on an SD card and then restart the SKR
 # mini with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 # Note: This board has a design flaw in its thermistor circuits that
 # cause inaccurate temperatures (most noticeable at low temperatures).

diff --git a/config/generic-bigtreetech-skr-pico-v1.0.cfg b/config/generic-bigtreetech-skr-pico-v1.0.cfg
@@ -6,7 +6,7 @@
 # after running "make", copy the generated "out/klipper.uf2" file
 # to the mass storage device in RP2040 boot mode
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: gpio11

diff --git a/config/generic-bigtreetech-skr-pro.cfg b/config/generic-bigtreetech-skr-pro.cfg
@@ -7,7 +7,7 @@
 # file named "firmware.bin" on an SD card and then restart the SKR PRO
 # with that SD card.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: PE9

diff --git a/config/generic-bigtreetech-skr-v1.1.cfg b/config/generic-bigtreetech-skr-v1.1.cfg
@@ -2,7 +2,7 @@
 # board. To use this config, the firmware should be compiled for the
 # LPC1768.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: P0.4

diff --git a/config/generic-bigtreetech-skr-v1.3.cfg b/config/generic-bigtreetech-skr-v1.3.cfg
@@ -2,7 +2,7 @@
 # board. To use this config, the firmware should be compiled for the
 # LPC1768.
 
-# See docs/Config_Reference.md for a description of parameters.
+# See docs/src/Config_Reference.md for a description of parameters.
 
 [stepper_x]
 step_pin: P2.2