Revert "Merge remote-tracking branch 'upstream/main'"

This reverts commit f1df296, reversing
changes made to 7e14c9b.

.github/FUNDING.yml

@@ -1,2 +1,2 @@
-ko_fi: kalicocrew
-custom: https://docs.kalico.gg/Sponsors.html#the-crew
+ko_fi: koconnor
+custom: https://www.klipper3d.org/Sponsors.html#klipper-developers

docs/Config_Reference.md

@@ -145,30 +145,6 @@ A collection of Kalico-specific system options
 #log_webhook_method_register_messages: False
 ```
 
-## ⚠️ Configuration references
-
-In your configuration, you can reference other values to share
-configuration between multiple sections. References take the form of
-`${option}` to copy a value in the current section, or
-`${section.option}` to look up a value elsewhere in your configuration.
-
-Optionally, a `[constants]` section may be used specifically to store
-these values. Unlike the rest of your configuration, unused constants
-will show a warning instead of causing an error.
-
-```
-[constants]
-run_current_ab:  1.0
-i_am_not_used: True  # Will show "Constant 'i_am_not_used' is unused"
-
-[tmc5160 stepper_x]
-run_current: ${constants.run_current_ab}
-
-[tmc5160 stepper_y]
-run_current: ${tmc5160 stepper_x.run_current}
-#   Nested references work, but are not advised
-```
-
 ## Common kinematic settings
 
 ### [printer]
@@ -1447,13 +1423,6 @@ extended [G-Code command](G-Codes.md#z_tilt) becomes available.
 
 #### [z_tilt_ng]
 
-z_tilt's next generation, adding the Z_TILT_CALIBRATE and Z_TILT_AUTODETECT
-extended [G-Code commands](G-Codes.md#z_tilt_ng). Z_TILT_CALIBRATE performs multiple
-probing runs to calculate z_offsets, enabling accurate tilt adjustment with fewer
-probe points. Z_TILT_AUTODETECT automatically determines pivot positions for each
-Z stepper through iterative probing. When this section is present, these extended
-commands become available, enhancing bed leveling accuracy and calibration efficiency.
-
 ```
 [z_tilt_ng]
 #z_positions:
@@ -5745,7 +5714,7 @@ Trad Rack multimaterial system support. See the following documents from the
 TradRack repo for additional information:
 - [Tuning.md](https://github.com/Annex-Engineering/TradRack/blob/main/docs/Tuning.md):
   document referenced by some of the config options below.
-- [Trad Rack config reference document](https://github.com/Annex-Engineering/TradRack/blob/main/docs/kalico/Config_Reference.md): contains info on additional config
+- [Trad Rack config reference document](https://github.com/Annex-Engineering/TradRack/blob/main/docs/klipper/Config_Reference.md): contains info on additional config
   sections that are expected to be used alongside [trad_rack].
 
 ```

docs/Danger_Features.md

@@ -14,7 +14,6 @@
 - `--rotate-log-at-restart` can be added to your Kalico start script or service to force log rotation every restart.
 - [`[virtual_sdcard] with_subdirs`](./Config_Reference.md#virtual_sdcard) enables scanning of subdirectories for .gcode files, for the menu and M20/M23 commands
 - [`[firmware_retraction] z_hop_height`](./Config_Reference.md#firmware_retraction) adds an automatic z hop when using firmware retraction
-- [`[constants]` and `${constants.value}`](./Config_Reference.md#configuration-references) allow re-using values in your configuration
 
 ## Enhanced behavior
 

docs/G-Codes.md

@@ -313,7 +313,7 @@ from executing.
 ### [delta_calibrate]
 
 The following commands are available when the
-[delta_calibrate] config section is enabled (also see the
+[delta_calibrate] config section is enabled (also see the 
 [delta calibrate guide](Delta_Calibrate.md)).
 
 #### DELTA_CALIBRATE
@@ -1618,7 +1618,7 @@ specified and it is higher than the extruder's current temperature,
 then the extruder will be heated to at least `MIN_TEMP` before
 unloading/loading; the current extruder temperature target may be used
 instead if it is higher than `MIN_TEMP`, and if not then
-[tr_last_heater_target](https://github.com/Annex-Engineering/TradRack/blob/main/docs/kalico/Save_Variables.md)
+[tr_last_heater_target](https://github.com/Annex-Engineering/TradRack/blob/main/docs/klipper/Save_Variables.md)
 may be used. If `EXACT_TEMP` is specified, the extruder will be heated
 to `EXACT_TEMP` before unloading/loading, regardless of any other
 temperature setting. If any of the optional length parameters are
@@ -1643,7 +1643,7 @@ the extruder's current temperature, then the extruder will be heated
 to at least `MIN_TEMP` before unloading; the current extruder
 temperature target may be used instead if it is higher than
 `MIN_TEMP`, and if not then
-[tr_last_heater_target](https://github.com/Annex-Engineering/TradRack/blob/main/docs/kalico/Save_Variables.md)
+[tr_last_heater_target](https://github.com/Annex-Engineering/TradRack/blob/main/docs/klipper/Save_Variables.md)
 may be used. If `EXACT_TEMP` is specified, the extruder will be heated
 to `EXACT_TEMP` before unloading/loading, regardless of any other
 temperature setting.
@@ -1738,15 +1738,15 @@ hotend_load_length will be set to the value passed in. If the ADJUST
 parameter is used, the adjustment will be added to the current value
 of hotend_load_length.
 
-#### TR_DISCARD_BOWDEN_LENGTHS
+### TR_DISCARD_BOWDEN_LENGTHS
 `TR_DISCARD_BOWDEN_LENGTHS [MODE=[ALL|LOAD|UNLOAD]]`: Discards saved
 values for "bowden_load_length" and/or "bowden_unload_length" (see
 [bowden lengths](https://github.com/Annex-Engineering/TradRack/blob/main/docs/Tuning.md#bowden-lengths)
 for details on how these settings are used). These settings will each
 be reset to the value of `bowden_length` from the
 [trad_rack config section](Config_Reference.md#trad_rack), and empty
 dictionaries will be saved for
-[tr_calib_bowden_load_length and tr_calib_bowden_unload_length](https://github.com/Annex-Engineering/TradRack/blob/main/docs/kalico/Save_Variables.md).
+[tr_calib_bowden_load_length and tr_calib_bowden_unload_length](https://github.com/Annex-Engineering/TradRack/blob/main/docs/klipper/Save_Variables.md).
 "bowden_load_length" and tr_calib_bowden_load_length will be
 affected if MODE=LOAD is specified, "bowden_unload_length" and
 tr_calib_bowden_unload_length will be affected if MODE=UNLOAD is
@@ -1876,18 +1876,6 @@ and detach a mag-probe for these commands!
 The following commands are available when the
 [z_tilt config section](Config_Reference.md#z_tilt) is enabled.
 
-#### Z_TILT_ADJUST
-`Z_TILT_ADJUST [HORIZONTAL_MOVE_Z=<value>] [<probe_parameter>=<value>]`: This
-command will probe the points specified in the config and then make independent
-adjustments to each Z stepper to compensate for tilt. See the PROBE command for
-details on the optional probe parameters. The optional `HORIZONTAL_MOVE_Z`
-value overrides the `horizontal_move_z` option specified in the config file.
-
-### [z_tilt_ng]
-
-The following commands are available when the
-[z_tilt_ng config section](Config_Reference.md#z_tilt_ng) is enabled.
-
 #### Z_TILT_ADJUST
 `Z_TILT_ADJUST [HORIZONTAL_MOVE_Z=<value>] [<probe_parameter>=<value>]
 [INCREASING_THRESHOLD=<value>]`: This
@@ -1912,3 +1900,5 @@ configured in the z_tilt_ng section:
   small misalgnments of the steppers. The amount of misalignment can be
   configured with the DELTA paramter. It iterates until the calculated
   positions cannot be improved any further. This is can be lengthy procedure.
+IMPORTANT: For the Z_TILT_CALIBRATE and Z_TILT_AUTODETECT commands to work
+the numpy package has to be installed via ~/klippy-env/bin/pip install -v numpy.

docs/Sponsors.md

@@ -1,38 +1,28 @@
 # Sponsors
 
-Kalico is a community-driven, open-source project that is free to use (as in "free beer").
-While we don't have official sponsors yet, we are deeply grateful for the generous support
-from our community. Every contribution helps us continue improving Kalico for everyone.
+Kalico is Free Software. We depend on the generous support from
+sponsors. Please consider sponsoring Kalico or supporting our
+sponsors.
 
-If you'd like to support Kalico, donations to our Ko-Fi are more than welcome:
-👉 [https://ko-fi.com/kalicocrew](https://ko-fi.com/kalicocrew)
+## Kalico Developers
 
-## The People behind Kalico
+### Rogerio Goncalves (@rogerlz)
 
-### The Crew
+Rogerio initiated the Kalico project, forking the awesome Klipper firmware originally as "Danger-Klipper" to add some bleeding edge spice to it.
 
-| Name                                                                                                                                                                                                                                                                                                               | Alias    | GitHub                                     |
-| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | -------- | ------------------------------------------ |
-| **Bea Nance**<br>Bea initiated the Kalico project together with Maël, forking the awesome Klipper firmware originally as "Danger-Klipper" to add some bleeding edge spice to it. <br> _"So I saw people wanted some community-driven features in klipper, so i was like "ehh, i'll just fork it and give it a go"_ | bwnance  | [@bwnance](https://github.com/bwnance)     |
-| **Maël Kerbiriou**<br>Maël together with Bea brought Kalico to life.                                                                                                                                                                                                                                               | piezoid  | [@Piezoid](https://github.com/Piezoid)     |
-| **Rogerio Goncalves**<br>Roger chimed in early into the development of Kalico, and has since been a crucial contributor to the project.                                                                                                                                                                            | rogerlz  | [@rogerlz](https://github.com/rogerlz)     |
-| **Frank Tackitt**<br>Frank started his klipper hacking with exclude_object and just forgot to stop there                                                                                                                                                                                                           | frank.af | [@kageurufu](https://github.com/kageurufu) |
+Contact: [[email protected]](mailto:[email protected])
 
-### Contributors
+### Lasse Dalegaard (@dalegaard)
 
-| Name                                                                                                                                                                                                                                                                                 | Alias      | GitHub                                               |
-| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ---------- | ---------------------------------------------------- |
-| **Vinzenz Hassert**<br>_"Uhh dunno... I mean I did pid profiles, filament sensors and curve control mainly. And I am best at giving Roger grey hairs cause I do huge pull requests!"_                                                                                                | LastZeanon | [@LastZeanon](https://github.com/LastZeanon)         |
-| **Yancey Arrington**<br>Yancey wrote the docs for all the bleeding edge features and model predictive control, otherwise you wouldn't know about all the fancy stuff Kalico brings to the table! He also helps other community members a lot with their questions. What a great guy! | Ray_Boy    | [@YanceyA](https://github.com/YanceyA)               |
-| **Ryan Ghosh**<br>All Ryan cares about are the TradRack and Belay modules of Kalico. How selfish! (no, in fact, that is very generous. Thanks Ryan!)                                                                                                                                 | RyanG      | [@rsghosh](https://github.com/rsghosh)               |
-| **Lasse Dalegaard**<br>Our secret consultant for roasting everything. He also contributed a lot more than he is willing to admit. Silly Lasse.                                                                                                                                       | dalegaard  | [@dalegaard](https://github.com/dalegaard)           |
-| **Philipp Molitor**<br>Phil started hacking around with the docs because he does web stuff and 3D printers, and liked the Kalico Crew so much he just... stuck around.<br>_"Hehehe... I wrote this page!"_                                                                           | philm0     | [@PhilippMolitor](https://github.com/PhilippMolitor) |
 
-## Other Kalico Contributors
 
-Kalico is a community effort, and we have a lot more people helping us!
-For a full list of people, have a look at the members of
-the [GitHub Organization](https://github.com/orgs/KalicoCrew/people) and our [Contributors](https://github.com/KalicoCrew/kalico/graphs/contributors).
+Contact: [[email protected]](mailto:[email protected])
+
+### Bea Nance (@bwnance)
+
+
+
+Contact: [[email protected]](mailto:[email protected])
 
 ## Original Klipper Developers
 
@@ -47,16 +37,16 @@ at: [https://ko-fi.com/koconnor](https://ko-fi.com/koconnor) or
 ### Eric Callahan
 
 Eric is the author of bed_mesh, spi_flash, and several other Klipper
-modules. Eric has a donations page at:
+modules.  Eric has a donations page at:
 [https://ko-fi.com/arksine](https://ko-fi.com/arksine)
 
 ## Related Kalico Projects
 
 Kalico is frequently used with other Free Software. Consider using or
 supporting these projects.
 
-- [Moonraker](https://github.com/Arksine/moonraker)
-- [Mainsail](https://github.com/mainsail-crew/mainsail)
-- [Fluidd](https://github.com/fluidd-core/fluidd)
-- [OctoPrint](https://octoprint.org/)
-- [KlipperScreen](https://github.com/jordanruthe/KlipperScreen)
+* [Moonraker](https://github.com/Arksine/moonraker)
+* [Mainsail](https://github.com/mainsail-crew/mainsail)
+* [Fluidd](https://github.com/fluidd-core/fluidd)
+* [OctoPrint](https://octoprint.org/)
+* [KlipperScreen](https://github.com/jordanruthe/KlipperScreen)

docs/Status_Reference.md

@@ -571,7 +571,7 @@ on a cartesian, hybrid_corexy or hybrid_corexz robot
 ## tools_calibrate
 
 The following information is available in the
-[tools_calibrate](Config_Reference.md#tools_calibrate) object:
+[tools_calibrate](Config_Reference.md#️-tools_calibrate) object:
 - `sensor_location`: Once calibrated, the location of the sensor
 - `last_result`: The last tool calibration result
 - `calibration_probe_inactive`: Status of the calibration probe as of

docs/Z_Calibration.md

@@ -72,7 +72,7 @@ But, there are some requirements to use it:
 Temperature or humindity changes are not a big deal since the switch is not
 affected much by them and all values are probed in a small time period and only
 the releations to each other are used. The nozzle height in step 2 can be
-determined some time later and even many Celsius higher in the printer's
+determined some time later and even many celsius higher in the printer's
 chamber, compared to the homing in step 1. That is why the nozzle is probed
 again and can vary a little to the first homing position.
 
@@ -286,4 +286,4 @@ at 250, you can preheat the nozzle to 180, and run this script before finishing
 temperature. This may have varying effects depending on temperatures used.
 
 Also consider picking up your probe prior to your nozzle wipe, to allow this script to probe the
-nozzle immediately after cleaning it.
+nozzle immediately after cleaning it.