Zynq mkbootimage

(c) 2015-2018 Antmicro

This is an open-source replacement for the Xilinx bootgen application. It parses a .bif file and creates a Zynq boot image in the .bin format.

It is written entirely in C.

Required C libraries: pcre, libelf.

To build this application run:

make

To use it, type in:

./mkbootimage [--zynqmp|-u] <input_bif_file> <output_bin_file>

Zynq-7000

For Zynq-7000 series, zynq-mkbootimage currently supports creating boot images containing the FSBL, bitstream, U-Boot, and Linux-related binary files.

For loading Linux-related images, both the [load] and the [offset] attributes are supported. As opposed to the original bootgen utility, file extensions are not required.

For example the following .bif file:

the_ROM_image:
{
  [bootloader]fsbl.elf
  fpga.bit
  u-boot.elf
  [load=0x2a00000]devicetree.dtb
  [load=0x2000000]uramdisk
  [load=0x3000000]uImage
}

used with the following command:

./mkbootimage boot.bif boot.bin

will generate a .bin image which can be used in U-Boot, as follows:

bootm 0x3000000 0x2000000 0x2a00000

Zynq UltraScale+

For Zynq UltraScale+, zynq-mkbootimage currently supports creating boot images containing the FSBL, bitstream, U-Boot, ARM trusted software and Linux-related binary images.

For example the following .bif file:

the_ROM_image:
{
  [fsbl_config] a53_x64
  [bootloader] fsbl.elf
  [destination_device=pl] fpga.bit
  [, destination_cpu=a53-0, exception_level=el-2] bl31.elf
  [, destination_cpu=a53-0, exception_level=el-2] u-boot.elf
  [load=0x2a00000]devicetree.dtb
  [load=0x2000000]uramdisk
  [load=0x3000000]uImage
}

used with the following command:

./mkbootimage --zynqmp boot.bif boot.bin

will generate a .bin image, which can be used to successfully boot a Zynq UltraScale+ machine, and to boot Linux using the following U-Boot command:

bootm 0x3000000 0x2000000 0x2a00000

Encryption certificates are not supported.