Docker Pi - AMS

An Automated Media Server via Docker on Rapsberry Pi.

Scenario

With Raspberry Pi releasing a version of their hardware with 4GB of RAM, it is possible to setup a lightweight fully automated media server running a set of docker containers.

You're in a conversation with a friend, and he mentions something new to watch. You can pull out your cellphone, browse to a personal website, search the name and queue it to download on your dockerpi-ams. Once the download is finished, you will be able to playback most formats to 1 client, and potentially transcode the format for 1 stream.

Hardware

• RaspberryPi 4 Model B 4GB

• Case with Fan + Heatsinks

• microSD card

• External TB Storage

Tools

• HypriotOS
  • Fastest way to get Docker up and running on any Raspberry Pi.
• Private Torrent Tracker (PTP, etc)
• Radarr
• Jackett
• Transmission
• [Custom Filebot for RPI](Dockerfile link)
• Plex
• LetsEncrypt

Method

Setup MicroSD and External Storage

• Install Hypriot Flash tool

  • flash

• Change the contents of the cloud_config.yaml found in this directory with the following attributes:

  • users.name, users.plain_text_password
  • write_files.content.ssid, write_files.content.psk (password)
  • Note: This will enable your RPI to automatically connect to your WiFi upon boot. You will be able to ssh from there.

• Open a terminal

  • Discover the mount point of your SD card. In OSX, run:
  • diskutil -l
  • Note: Replace the value after the -d parameter below with your own. There is a potential to flash one of your hard disks if you are not correct.
  • flash -d /dev/disk3 --userdata cloud_config.yaml https://github.com/hypriot/image-builder-rpi/releases/download/v1.11.1/hypriotos-rpi-v1.11.1.img.zip

• Insert SD card into Pi and boot up.

• Check ssh:

  • ssh [email protected]

• Mount External Storage:

  • lsblk to list where all devices are
  • sudo mount -t hfsplus -o force,rw /dev/sda3 /srv

• Optional : Setup External Storage to AutoMount on boot

  • Once you have SSH into your dockerpi box, run: blkid
  • Note Copy the UUID of your External Storage
  • sudo vi /etc/fstab
  • Inside the editor, add a new line entry: UUID=<your_value> /srv hfsplus force,rw,nofail,x-systemd.device-timeout=1,noatime 0 0

• All setup of containers (below) happens from SSH to your dockerpi-ams.

Setup Containers

Transmission Setup

• Create directory structure and change to it: -/srv/plexMediaServer/config/combustion
• Download Combustion:
  • rm -f release.zip && wget https://github.com/Secretmapper/combustion/archive/release.zip && unzip release.zip;
• Note Export the above directory where combustion was installed as a variable to the transmission container:

$ docker create \
    --name=transmission \
    --network=rpi \
    -e PUID=1000 \
    -e PGID=1000 \
    -e TZ=Denver/America \
    -e TRANSMISSION_WEB_HOME=/config/combustion/combustion-release \
    -p 9091:9091 \
    -p 51413:51413 \
    -p 51413:51413/udp
    -v /srv/plexMediaServer/config:/config \
    -v /srv/plexMediaServer/Downloads:/downloads \
    -v /srv/plexMediaServer/config/torrents:/watch \
    --restart unless-stopped \
    linuxserver/transmission

• Start the container:
  • docker start transmission
• Edit transmission settings to add login and filebot ping script
  • sudo vi /srv/plexMediaServer/config/settings.json
  • Change the following values and uncomment:
    • rpc-username:
    • rpc-password: <plaintext_entry>
    • script-call-after: "/config/transmission/transmission-postprocess.sh"
    • rpc-host-whitelist:"t.dnsname.com"

Jackett Setup

$ docker create \
    --name=jackett \
    --network=rpi \
    -e PUID=1000 \
    -e PGID=1000 \
    -e TZ=Denver/America \
    -p 9117:9117 \
    -v /srv/plexMediaServer/config:/config \
    -v /srv/plexMediaServer/Downloads:/downloads \
    -- restart unless-stopped \
    linuxserver/jackett

Radarr Setup

$ docker create \
    --name=radarr \
    --network=rpi \
    -e PUID=1000 \
    -e PGID=1000 \
    -e TZ=Denver/America \
    -p 7878:7878 \
    -v /srv/plexMediaServer/config/radarr:/config \
    -v /srv/plexMediaServer/Movies:/movies \
    -v /srv/plexMediaServer/Downloads:/downloads \
    restart unless-stopped \
    linuxserver/darr

Detailed instructions and rest of container setup to come.