Update

docs/firmwares/firmware-recovery-k1.md

@@ -27,7 +27,6 @@ If your motherboard is partially bricked, it's possible to restore the firmware
     :material-google-drive: [Ingenic 1.3.0.39 (Google Drive)](https://drive.google.com/file/d/1zlV_gpXGbqq8l_wbcNEygb2r-DPEHV9g/view?usp=drive_link)
 
 
-
 ## Drivers Installation
 <hr>
 

docs/firmwares/install-and-update-rooted-firmware-k1.md

@@ -36,6 +36,8 @@ Please follow the instruction below strictly before to install latest firmware.
 
     :material-google-drive: [1.3.3.36 (Google Drive)](https://drive.google.com/file/d/1SiOEZU2pM553ZniUa9tt9XMyrZ8FKbT_/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/K1/Changelog_1.3.3.36.txt)
 
+    :material-google-drive: [1.3.3.46 (Google Drive)](https://drive.google.com/file/d/1G7VbYWHmuFZzdqpkSGDlBuUVdSaruJR-/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/K1/Changelog_1.3.3.46.txt)
+
 
 ## Installation & Update
 <hr>

docs/firmwares/restore-previous-firmware-k1.md

@@ -20,6 +20,8 @@ You can easily restore current Firmware to a previous one.
 
     :material-google-drive: [1.3.3.36 (Google Drive)](https://drive.google.com/file/d/1SiOEZU2pM553ZniUa9tt9XMyrZ8FKbT_/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/K1/Changelog_1.3.3.36.txt)
 
+    :material-google-drive: [1.3.3.46 (Google Drive)](https://drive.google.com/file/d/1G7VbYWHmuFZzdqpkSGDlBuUVdSaruJR-/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/K1/Changelog_1.3.3.46.txt)
+
 
 ## Restoration
 <hr>

docs/helper-script/restore-a-previous-firmware-k1.md

@@ -18,6 +18,10 @@ You can easily restore current Firmware to a previous Firmware directly from the
 
     :material-google-drive: [1.3.3.29 (Google Drive)](https://drive.google.com/file/d/1NxsR7_bMTwDUZZVag909ea3NbAyd4k1f/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/K1/Changelog_1.3.3.29.txt)
 
+    :material-google-drive: [1.3.3.36 (Google Drive)](https://drive.google.com/file/d/1SiOEZU2pM553ZniUa9tt9XMyrZ8FKbT_/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/K1/Changelog_1.3.3.36.txt)
+
+    :material-google-drive: [1.3.3.46 (Google Drive)](https://drive.google.com/file/d/1G7VbYWHmuFZzdqpkSGDlBuUVdSaruJR-/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/K1/Changelog_1.3.3.46.txt)
+
 
 ## Prepare USB drive
 <hr>

downloads/Changelogs/K1/Changelog_1.3.3.46.txt

@@ -0,0 +1,13 @@
+V1.3.3.46 Firmware Update
+
+1. Optimize connectivity issues with Creality Cloud camera.
+2. Change the LIDAR from always-on power to power-on-demand.
+3. Add failure animation for UI therope fan and motherboard fan during startup self-check.
+4. Update built-in Gcode.
+5. Fix UI black screen issue caused by repeated detection during auto-leveling and when manually setting leveling points to more than 7x7.
+6. Fix status bar incorrectly displaying camera connection when no camera is connected at startup.
+7. Fix screen-off issue during screen operation.
+
+Tips:
+1. Please do a factory reset if you used the root script to install other components, otherwise it might cause errors.
+2. Upgrade won't remove fluidd/mainsail, but will overwrite printer configs. Save configs if needed.