A Cura plugin to add an offset to the printing temperature.
Set a temperature offset with a value between -30 and positive 30. This plugin will modify the resulting gcode so that every call to M104 or M109 will be increased or decreased by the amount specified. This is useful when you have a default printing temperature set for the material that works well most of the time, but you need to adjust the temperature for a specific profile, such as when using a larger nozzle or printing at a faster speed. This plugin allows you to modify that temperature without modifying the material settings.
M104 and M109 commands that set the temperature to 0 (turning the heater off) are not modified.
Print temperature set to 215, Printing Temperature Offset set to 10: Modified temperature will be 225
Print temperature set to 215, Printing Temperature Offset set to -10: Modified temperature will be 205
This has been tested on Cura 3.2.0.
Download PrintTemperatureOffset.curaplugin, drag and drop the .curaplugin file into Cura, then restart Cura for the plugin to be loaded. You will need to enable the plugin and all of the plugin's settings.
My default material temperatures work great on my 0.4 and 0.6 nozzles, but I was seeing layer de-lamination with my 1.0 nozzle. With this plugin, I can offset the printing temperature on my 1.0mm nozzle profile and print successfully with any filament.