Steelseries Apex 7 on Linux

This is raw and unpolished code. Use it at your own risk.

ssere.py contains examples on how to:

• Set key colors (individual or by region)
• Activate or switch a configuration
• Update the OLED image or write text to the display

Installation

pip install -r requirements.txt

Usage as non-root

This requires a udev ruleset.

sudo cp 51-apex.rules /etc/udev/rules.d/51-apex.rules && sudo udevadm control --reload && sudo udevadm trigger

CLI usage

Load profile

Takes in the the profile number.

• ./cli.py config 1

Oled screen control

• ./cli.py oledblank
• ./cli.py oled ./images/grimm.png
• ./cli.py oledtext "Hello" "from the other side"

Color

Takes in pairs of (keycode(s) or region(s), color). You can define multiple keycodes or regions in a given pair by using a comma separator.

Examples:

• ./cli.py color ALL orange
• ./cli.py color ALPHA c26838
• ./cli.py color F9,F10,F11,F12 red
• ./cli.py color SYMBOLS_LEFT green F1,F2,F3,F4 red -- black

Available regions:

• FKEYS: Function keys
• ALPHA: Letters and space bar
• NUMERIC: Number row
• SYMBOLS_LEFT: Symbols left of alpha keys
• SYMBOLS_RIGHT1: Symbols right of alpha keys
• SYMBOLS_RIGHT2 M1 to M6 and arrow keys
• KEYPAD: Numeric key pad (not available for Apex7 TKL)
• ALL: All keys
• --: Special region that sets the following color on all keys that have not been used so far.

See keys.py for list key codes