Home

Welcome to the ResistorLabels wiki!

Troubleshooting

If the label comes out misaligned like this: , follow these steps to troubleshoot:

• Check the Printer Driver:

  • Go to "Settings" and select the printer in question (e.g., Brother HL-L3230CDW).
  • Click on "Printer Properties":
  • In the "Printer Properties" window, check the "Driver".
  • If it says "Microsoft IPP Class Driver" , this will cause misalignment issues when printing labels.

• Update the Vendor's Driver:

  • Go to the vendor's website to download and install the actual printer driver.
  • Return to "Printer Properties" and select the vendor's driver like so:

• Print with Proper Settings:

  • Avery recommends using Adobe PDF Reader to print the labels.
  • Before printing, make sure "Actual size" is selected.
  • Then click on "Properties" next to the printer:
  • This will bring up a new window. Ensure the Media Type is set to "Label":
  • Click "OK" and exit the Printer Properties window.
  • Click "Print" to continue.

Note: Some printers may require manually feeding the label, where the label must be pushed in until the printer's roller is engaged. Follow the manufacturer's [instructions](https://support.brother.com/g/b/faqendbranchprintable.aspx?c=gb&lang=en&pro